- Low profile, two inches including the base
- Simple and reliable addressing without mechanical switches
- Automatic compensation for sensor contamination
- Built-in fire test feature
- Vandal resistance locking features
- Field cleanable
- IP rating: IP67
- Glass element
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
- Surface mounting
- Low working current
- LED indicator and buzzer
- No wire connection
- Complete functional test with every activation
- Meets all requirements of latest EN standard.
- Easy to install, mounting bracket included.
- Loud 85 dB alarm and LED warning light.
- High quality durable sensor.
- Self-diagnostic function by MCU intelligent software.
- Excellent reliability and high stability.
- Ideal for all kitchens.
- Product: 4 wire LPG gas detector
- Brand: Asenware
- Model Number: AW-D132C-4W
- Power Consumption: ≤2W @Alarm
- Alarm Horn: ≥ 85dB @3m
- Main Voltage: 24V DC
- Alarm Outputs: DC12V pulse voltage and Relay( COM ,NO )
- Warm Up Time: Approximately 90 Seconds
- Size: 104.5mm* 58mm* 29.1mm
- Weight: About 62g
- Conventional Manual Call Point Appearance
- LED Indicator
- Conventional Manual Call Point Working Environment
- This conventional manual call point is suitable for indoor use, in order to better achieve product performance.
- This conventional manual call point complies with the EN54-11 standard
- Soft addressed
- Integral short circuit isolator
- Single address
- Fast fit clip on front cover
- High visibility status LED
- Wide range of accessories
- Heavy duty terminals
- Robust design
- Low current consumption
- Easy to install
- Maximum 110dB(A) at 1 metre (dependant on tone selected)
- 32 user-selectable tones
- Third-party certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc =Â 3.8mA.
- IP33C rated.
- Certified to EN54 Parts 11 (LPCB)Â and 13 (BSI).
- ‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
- Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
- Quick visible alarm indication.
- Changeover contacts.
- IP24 rated.
- A high-quality programmable heat detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-5 & 17 and Kiwa Telefication certified to EN54-13.
- Can be programmed to operate as a Class A1R (rate of rise), Class A2 (64ºC fixed temperature) or Class B (76ºC fixed temperature) heat detector. The default setting is A2.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Different sensitivities can be selected for different times of the day (day/night, building occupied/unoccupied etc).
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC.
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
-  A high-quality smoke detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-7 & 17 and Kiwa Telefication certified to EN54-13.
- Smart algorithms help reduce false alarms.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Drift compensation functionality.
- 0.16dB/m sensitivity/obscuration level.
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
- 8 zones panels
- Flexible, high specification system
- Surface or semi-flush mounting
- Simple “one-shot” auto-reset user test facility
- Maintenance free poly switch circuit protection, with auto reset
- Class change and programmable fire/fault relay as standard
- Quick and simple to install
- Simple two wire connection
- No power supply required
- Quick and simple to install
- Simple two wire connection
- No power supply required
- Available in 1, 2 and 4 loop versions
- Up to 200 addresses per loop
- Full network capability up to 126 panels
- Event History Buffer (9,999 events) with Date/Time stamp
- Soft addressing
- Large versatile touch screen user interface
- Multi-language selection capability
- Integral printer (optional)
- Integral battery and power supply
- Flexible cause and effect programming
KSh6,000.00 Excl. VAT
Honeywell Addressable Photoelectric Smoke Detector
SKU: N/AHoneywell Addressable Photoelectric Smoke Detector
•  Low-profile design
•  Common base for optical, ionization, and thermal sensors
•  Addressable-analogue communication
•  Stable communication technique with noise immunity
•  Low standby current
•  Rotary decade 01 to 99 address switches
•  Remote LED output as standard
•  Dual LED design provides 360° viewing angle
•  Visible LED’s blink every time the detector is addressed (optional), and illuminate steady on alarm
•  Built-in functional test switch activated by an external magnet
•  Optional relay, isolator, or sounder bases
•  LPCB approved
KSh10,500.00 Excl. VAT
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
SKU: N/AW5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
KSh6,000.00 Excl. VAT
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
SKU: N/AHM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
KSh1,500.00 Asenware Smoke Detector AW-CSD311
SKU: N/AAsenware Smoke Detector AW-CSD311
AW-CSD311Â is conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
KSh1,600.00 Excl. VAT
Asenware Standalone Heat Detector
SKU: N/AAsenware Standalone Heat Detector
KSh8,000.00 Excl. VAT
Asenware LPG Gas Leak Detector With shutt off Valve AW-D132
SKU: 926Asenware LPG Gas Leak Detector With shutt off Valve  AW-D132
KSh4,500.00 Inim ED100 Optical Smoke Detector
SKU: N/AED100
Optical smoke detector
The ED100 optical smoke detector is based on the Tyndall effect (diffusion of light) and provides firstrate early warning in the event of fire.
It offers wide-spectrum detection of smoke particles generated by the majority of fires. The newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen ensure high immunity to false alarms.
The sensitivity can be configured to suit a wide range of applications (sensitivity configurable as: 0.08dB/m; 0.10dB/m; 0.12dB/m; 0.15dB/m).
KSh15,000.00 Excl. VAT
Asenware Conventional LPG Gas Detector AW-D132C-4W 24V DC 4 wire
SKU: N/AAsenware Conventional LPG Gas Detector AW-D132C-4W 24V DC 4 wire
KSh1,200.00 Excl. VAT
Asenware Conventional Manual Call Point AW-D135C
SKU: N/AAsenware Conventional Manual Call Point AW-D135C
KSh1,200.00 Excl. VAT
Asenware Conventional Smoke Detector AW-CSD381
SKU: N/AAsenware Conventional Smoke Detector AW-CSD381
Model No. : AW-CSD381
 Photo-Electric type spot detector
 Built in dual LEDs
 Visible from all around 360°
 Remote indicator output
 Compatible with most brands fire alarm panels.
 LPCB approved.
KSh5,000.00 Excl. VAT
Menvier Call Point addressable CBG 370S
SKU: N/AMenvier Call Point addressable CBG 370S
KSh6,000.00 Excl. VAT
Hochiki Conventional Wall Sounder
SKU: N/AHochiki Conventional Wall Sounder
KSh3,500.00 Excl. VAT
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
SKU: N/ACTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
KSh2,500.00 Excl. VAT
C-Tec Conventional Manual Call Point
SKU: N/AC-Tec Conventional Manual Call Point
KSh6,000.00 Excl. VAT
C-Tec Addressable Heat Detector
SKU: N/AC-Tec Addressable Heat Detector
KSh6,200.00 Excl. VAT
C-Tec Addressable Smoke Detector
SKU: N/AC-Tec Addressable Smoke Detector
KSh50,000.00 Excl. VAT
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
SKU: N/ACooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
KSh120,000.00 Excl. VAT
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
SKU: N/ACooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
KSh105,000.00 Excl. VAT
Cooper Menvier MBD50R Conventional Infra-Red Beam Receiver complete with mounting base – 50m Range
SKU: N/ACooper Menvier MBD50R Conventional Infra-Red Beam Receiver complete with mounting base – 50m Range
KSh240,000.00 Excl. VAT
Cooper Menvier CF30004G Intelligent Addressable 4 Loop Control Panel
SKU: N/ACooper Menvier CF30004G Intelligent Addressable 4 Loop Control Panel
- Low profile, two inches including the base
- Simple and reliable addressing without mechanical switches
- Automatic compensation for sensor contamination
- Built-in fire test feature
- Vandal resistance locking features
- Field cleanable
- IP rating: IP67
- Glass element
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
- Surface mounting
- Low working current
- LED indicator and buzzer
- No wire connection
- Complete functional test with every activation
- Meets all requirements of latest EN standard.
- Easy to install, mounting bracket included.
- Loud 85 dB alarm and LED warning light.
- High quality durable sensor.
- Self-diagnostic function by MCU intelligent software.
- Excellent reliability and high stability.
- Ideal for all kitchens.
- Product: 4 wire LPG gas detector
- Brand: Asenware
- Model Number: AW-D132C-4W
- Power Consumption: ≤2W @Alarm
- Alarm Horn: ≥ 85dB @3m
- Main Voltage: 24V DC
- Alarm Outputs: DC12V pulse voltage and Relay( COM ,NO )
- Warm Up Time: Approximately 90 Seconds
- Size: 104.5mm* 58mm* 29.1mm
- Weight: About 62g
- Conventional Manual Call Point Appearance
- LED Indicator
- Conventional Manual Call Point Working Environment
- This conventional manual call point is suitable for indoor use, in order to better achieve product performance.
- This conventional manual call point complies with the EN54-11 standard
- Soft addressed
- Integral short circuit isolator
- Single address
- Fast fit clip on front cover
- High visibility status LED
- Wide range of accessories
- Heavy duty terminals
- Robust design
- Low current consumption
- Easy to install
- Maximum 110dB(A) at 1 metre (dependant on tone selected)
- 32 user-selectable tones
- Third-party certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc =Â 3.8mA.
- IP33C rated.
- Certified to EN54 Parts 11 (LPCB)Â and 13 (BSI).
- ‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
- Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
- Quick visible alarm indication.
- Changeover contacts.
- IP24 rated.
- A high-quality programmable heat detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-5 & 17 and Kiwa Telefication certified to EN54-13.
- Can be programmed to operate as a Class A1R (rate of rise), Class A2 (64ºC fixed temperature) or Class B (76ºC fixed temperature) heat detector. The default setting is A2.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Different sensitivities can be selected for different times of the day (day/night, building occupied/unoccupied etc).
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC.
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
-  A high-quality smoke detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-7 & 17 and Kiwa Telefication certified to EN54-13.
- Smart algorithms help reduce false alarms.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Drift compensation functionality.
- 0.16dB/m sensitivity/obscuration level.
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
- 8 zones panels
- Flexible, high specification system
- Surface or semi-flush mounting
- Simple “one-shot” auto-reset user test facility
- Maintenance free poly switch circuit protection, with auto reset
- Class change and programmable fire/fault relay as standard
- Quick and simple to install
- Simple two wire connection
- No power supply required
- Quick and simple to install
- Simple two wire connection
- No power supply required
- Available in 1, 2 and 4 loop versions
- Up to 200 addresses per loop
- Full network capability up to 126 panels
- Event History Buffer (9,999 events) with Date/Time stamp
- Soft addressing
- Large versatile touch screen user interface
- Multi-language selection capability
- Integral printer (optional)
- Integral battery and power supply
- Flexible cause and effect programming
Honeywell Addressable Photoelectric Smoke Detector
Honeywell Addressable Photoelectric Smoke Detector
•  Low-profile design
•  Common base for optical, ionization, and thermal sensors
•  Addressable-analogue communication
•  Stable communication technique with noise immunity
•  Low standby current
•  Rotary decade 01 to 99 address switches
•  Remote LED output as standard
•  Dual LED design provides 360° viewing angle
•  Visible LED’s blink every time the detector is addressed (optional), and illuminate steady on alarm
•  Built-in functional test switch activated by an external magnet
•  Optional relay, isolator, or sounder bases
•  LPCB approved
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
Asenware Smoke Detector AW-CSD311
Asenware Smoke Detector AW-CSD311
AW-CSD311Â is conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
Asenware Standalone Heat Detector
Asenware Standalone Heat Detector
Asenware LPG Gas Leak Detector With shutt off Valve AW-D132
Asenware LPG Gas Leak Detector With shutt off Valve  AW-D132
Inim ED100 Optical Smoke Detector
ED100
Optical smoke detector
The ED100 optical smoke detector is based on the Tyndall effect (diffusion of light) and provides firstrate early warning in the event of fire.
It offers wide-spectrum detection of smoke particles generated by the majority of fires. The newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen ensure high immunity to false alarms.
The sensitivity can be configured to suit a wide range of applications (sensitivity configurable as: 0.08dB/m; 0.10dB/m; 0.12dB/m; 0.15dB/m).
Asenware Conventional LPG Gas Detector AW-D132C-4W 24V DC 4 wire
Asenware Conventional LPG Gas Detector AW-D132C-4W 24V DC 4 wire
Asenware Conventional Manual Call Point AW-D135C
Asenware Conventional Manual Call Point AW-D135C
Asenware Conventional Smoke Detector AW-CSD381
Asenware Conventional Smoke Detector AW-CSD381
Model No. : AW-CSD381
 Photo-Electric type spot detector
 Built in dual LEDs
 Visible from all around 360°
 Remote indicator output
 Compatible with most brands fire alarm panels.
 LPCB approved.
Menvier Call Point addressable CBG 370S
Menvier Call Point addressable CBG 370S
Hochiki Conventional Wall Sounder
Hochiki Conventional Wall Sounder
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
C-Tec Conventional Manual Call Point
C-Tec Conventional Manual Call Point
C-Tec Addressable Heat Detector
C-Tec Addressable Heat Detector
C-Tec Addressable Smoke Detector
C-Tec Addressable Smoke Detector
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
Cooper Menvier MBD50R Conventional Infra-Red Beam Receiver complete with mounting base – 50m Range
Cooper Menvier MBD50R Conventional Infra-Red Beam Receiver complete with mounting base – 50m Range
Cooper Menvier CF30004G Intelligent Addressable 4 Loop Control Panel
Cooper Menvier CF30004G Intelligent Addressable 4 Loop Control Panel
- Low profile, two inches including the base
- Simple and reliable addressing without mechanical switches
- Automatic compensation for sensor contamination
- Built-in fire test feature
- Vandal resistance locking features
- Field cleanable
- IP rating: IP67
- Glass element
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
- Surface mounting
- Low working current
- LED indicator and buzzer
- No wire connection
- Complete functional test with every activation
- Meets all requirements of latest EN standard.
- Easy to install, mounting bracket included.
- Loud 85 dB alarm and LED warning light.
- High quality durable sensor.
- Self-diagnostic function by MCU intelligent software.
- Excellent reliability and high stability.
- Ideal for all kitchens.
- Product: 4 wire LPG gas detector
- Brand: Asenware
- Model Number: AW-D132C-4W
- Power Consumption: ≤2W @Alarm
- Alarm Horn: ≥ 85dB @3m
- Main Voltage: 24V DC
- Alarm Outputs: DC12V pulse voltage and Relay( COM ,NO )
- Warm Up Time: Approximately 90 Seconds
- Size: 104.5mm* 58mm* 29.1mm
- Weight: About 62g
- Conventional Manual Call Point Appearance
- LED Indicator
- Conventional Manual Call Point Working Environment
- This conventional manual call point is suitable for indoor use, in order to better achieve product performance.
- This conventional manual call point complies with the EN54-11 standard
- Soft addressed
- Integral short circuit isolator
- Single address
- Fast fit clip on front cover
- High visibility status LED
- Wide range of accessories
- Heavy duty terminals
- Robust design
- Low current consumption
- Easy to install
- Maximum 110dB(A) at 1 metre (dependant on tone selected)
- 32 user-selectable tones
- Third-party certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc =Â 3.8mA.
- IP33C rated.
- Certified to EN54 Parts 11 (LPCB)Â and 13 (BSI).
- ‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
- Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
- Quick visible alarm indication.
- Changeover contacts.
- IP24 rated.
- A high-quality programmable heat detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-5 & 17 and Kiwa Telefication certified to EN54-13.
- Can be programmed to operate as a Class A1R (rate of rise), Class A2 (64ºC fixed temperature) or Class B (76ºC fixed temperature) heat detector. The default setting is A2.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Different sensitivities can be selected for different times of the day (day/night, building occupied/unoccupied etc).
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC.
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
-  A high-quality smoke detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-7 & 17 and Kiwa Telefication certified to EN54-13.
- Smart algorithms help reduce false alarms.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Drift compensation functionality.
- 0.16dB/m sensitivity/obscuration level.
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
- 8 zones panels
- Flexible, high specification system
- Surface or semi-flush mounting
- Simple “one-shot” auto-reset user test facility
- Maintenance free poly switch circuit protection, with auto reset
- Class change and programmable fire/fault relay as standard
- Quick and simple to install
- Simple two wire connection
- No power supply required
- Quick and simple to install
- Simple two wire connection
- No power supply required
- Available in 1, 2 and 4 loop versions
- Up to 200 addresses per loop
- Full network capability up to 126 panels
- Event History Buffer (9,999 events) with Date/Time stamp
- Soft addressing
- Large versatile touch screen user interface
- Multi-language selection capability
- Integral printer (optional)
- Integral battery and power supply
- Flexible cause and effect programming
Honeywell Addressable Photoelectric Smoke Detector
Honeywell Addressable Photoelectric Smoke Detector
•  Low-profile design
•  Common base for optical, ionization, and thermal sensors
•  Addressable-analogue communication
•  Stable communication technique with noise immunity
•  Low standby current
•  Rotary decade 01 to 99 address switches
•  Remote LED output as standard
•  Dual LED design provides 360° viewing angle
•  Visible LED’s blink every time the detector is addressed (optional), and illuminate steady on alarm
•  Built-in functional test switch activated by an external magnet
•  Optional relay, isolator, or sounder bases
•  LPCB approved
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
Asenware Smoke Detector AW-CSD311
Asenware Smoke Detector AW-CSD311
AW-CSD311Â is conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
Asenware Standalone Heat Detector
Asenware Standalone Heat Detector
Asenware LPG Gas Leak Detector With shutt off Valve AW-D132
Asenware LPG Gas Leak Detector With shutt off Valve  AW-D132
Inim ED100 Optical Smoke Detector
ED100
Optical smoke detector
The ED100 optical smoke detector is based on the Tyndall effect (diffusion of light) and provides firstrate early warning in the event of fire.
It offers wide-spectrum detection of smoke particles generated by the majority of fires. The newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen ensure high immunity to false alarms.
The sensitivity can be configured to suit a wide range of applications (sensitivity configurable as: 0.08dB/m; 0.10dB/m; 0.12dB/m; 0.15dB/m).
Asenware Conventional LPG Gas Detector AW-D132C-4W 24V DC 4 wire
Asenware Conventional LPG Gas Detector AW-D132C-4W 24V DC 4 wire
Asenware Conventional Manual Call Point AW-D135C
Asenware Conventional Manual Call Point AW-D135C
Asenware Conventional Smoke Detector AW-CSD381
Asenware Conventional Smoke Detector AW-CSD381
Model No. : AW-CSD381
 Photo-Electric type spot detector
 Built in dual LEDs
 Visible from all around 360°
 Remote indicator output
 Compatible with most brands fire alarm panels.
 LPCB approved.
Menvier Call Point addressable CBG 370S
Menvier Call Point addressable CBG 370S
Hochiki Conventional Wall Sounder
Hochiki Conventional Wall Sounder
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
C-Tec Conventional Manual Call Point
C-Tec Conventional Manual Call Point
C-Tec Addressable Heat Detector
C-Tec Addressable Heat Detector
C-Tec Addressable Smoke Detector
C-Tec Addressable Smoke Detector
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
Cooper Menvier MBD50R Conventional Infra-Red Beam Receiver complete with mounting base – 50m Range
Cooper Menvier MBD50R Conventional Infra-Red Beam Receiver complete with mounting base – 50m Range
Cooper Menvier CF30004G Intelligent Addressable 4 Loop Control Panel
Cooper Menvier CF30004G Intelligent Addressable 4 Loop Control Panel
- Low profile, two inches including the base
- Simple and reliable addressing without mechanical switches
- Automatic compensation for sensor contamination
- Built-in fire test feature
- Vandal resistance locking features
- Field cleanable
- IP rating: IP67
- Glass element
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
- Surface mounting
- Low working current
- LED indicator and buzzer
- No wire connection
- Complete functional test with every activation
- Meets all requirements of latest EN standard.
- Easy to install, mounting bracket included.
- Loud 85 dB alarm and LED warning light.
- High quality durable sensor.
- Self-diagnostic function by MCU intelligent software.
- Excellent reliability and high stability.
- Ideal for all kitchens.
- Product: 4 wire LPG gas detector
- Brand: Asenware
- Model Number: AW-D132C-4W
- Power Consumption: ≤2W @Alarm
- Alarm Horn: ≥ 85dB @3m
- Main Voltage: 24V DC
- Alarm Outputs: DC12V pulse voltage and Relay( COM ,NO )
- Warm Up Time: Approximately 90 Seconds
- Size: 104.5mm* 58mm* 29.1mm
- Weight: About 62g
- Conventional Manual Call Point Appearance
- LED Indicator
- Conventional Manual Call Point Working Environment
- This conventional manual call point is suitable for indoor use, in order to better achieve product performance.
- This conventional manual call point complies with the EN54-11 standard
- Soft addressed
- Integral short circuit isolator
- Single address
- Fast fit clip on front cover
- High visibility status LED
- Wide range of accessories
- Heavy duty terminals
- Robust design
- Low current consumption
- Easy to install
- Maximum 110dB(A) at 1 metre (dependant on tone selected)
- 32 user-selectable tones
- Third-party certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc =Â 3.8mA.
- IP33C rated.
- Certified to EN54 Parts 11 (LPCB)Â and 13 (BSI).
- ‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
- Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
- Quick visible alarm indication.
- Changeover contacts.
- IP24 rated.
- A high-quality programmable heat detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-5 & 17 and Kiwa Telefication certified to EN54-13.
- Can be programmed to operate as a Class A1R (rate of rise), Class A2 (64ºC fixed temperature) or Class B (76ºC fixed temperature) heat detector. The default setting is A2.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Different sensitivities can be selected for different times of the day (day/night, building occupied/unoccupied etc).
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC.
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
-  A high-quality smoke detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-7 & 17 and Kiwa Telefication certified to EN54-13.
- Smart algorithms help reduce false alarms.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Drift compensation functionality.
- 0.16dB/m sensitivity/obscuration level.
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
- 8 zones panels
- Flexible, high specification system
- Surface or semi-flush mounting
- Simple “one-shot” auto-reset user test facility
- Maintenance free poly switch circuit protection, with auto reset
- Class change and programmable fire/fault relay as standard
- Quick and simple to install
- Simple two wire connection
- No power supply required
- Quick and simple to install
- Simple two wire connection
- No power supply required
- Available in 1, 2 and 4 loop versions
- Up to 200 addresses per loop
- Full network capability up to 126 panels
- Event History Buffer (9,999 events) with Date/Time stamp
- Soft addressing
- Large versatile touch screen user interface
- Multi-language selection capability
- Integral printer (optional)
- Integral battery and power supply
- Flexible cause and effect programming
Honeywell Addressable Photoelectric Smoke Detector
Honeywell Addressable Photoelectric Smoke Detector
•  Low-profile design
•  Common base for optical, ionization, and thermal sensors
•  Addressable-analogue communication
•  Stable communication technique with noise immunity
•  Low standby current
•  Rotary decade 01 to 99 address switches
•  Remote LED output as standard
•  Dual LED design provides 360° viewing angle
•  Visible LED’s blink every time the detector is addressed (optional), and illuminate steady on alarm
•  Built-in functional test switch activated by an external magnet
•  Optional relay, isolator, or sounder bases
•  LPCB approved
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
Asenware Smoke Detector AW-CSD311
Asenware Smoke Detector AW-CSD311
AW-CSD311Â is conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
Asenware Standalone Heat Detector
Asenware Standalone Heat Detector
Asenware LPG Gas Leak Detector With shutt off Valve AW-D132
Asenware LPG Gas Leak Detector With shutt off Valve  AW-D132
Inim ED100 Optical Smoke Detector
ED100
Optical smoke detector
The ED100 optical smoke detector is based on the Tyndall effect (diffusion of light) and provides firstrate early warning in the event of fire.
It offers wide-spectrum detection of smoke particles generated by the majority of fires. The newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen ensure high immunity to false alarms.
The sensitivity can be configured to suit a wide range of applications (sensitivity configurable as: 0.08dB/m; 0.10dB/m; 0.12dB/m; 0.15dB/m).
Asenware Conventional LPG Gas Detector AW-D132C-4W 24V DC 4 wire
Asenware Conventional LPG Gas Detector AW-D132C-4W 24V DC 4 wire
Asenware Conventional Manual Call Point AW-D135C
Asenware Conventional Manual Call Point AW-D135C
Asenware Conventional Smoke Detector AW-CSD381
Asenware Conventional Smoke Detector AW-CSD381
Model No. : AW-CSD381
 Photo-Electric type spot detector
 Built in dual LEDs
 Visible from all around 360°
 Remote indicator output
 Compatible with most brands fire alarm panels.
 LPCB approved.
Menvier Call Point addressable CBG 370S
Menvier Call Point addressable CBG 370S
Hochiki Conventional Wall Sounder
Hochiki Conventional Wall Sounder
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
C-Tec Conventional Manual Call Point
C-Tec Conventional Manual Call Point
C-Tec Addressable Heat Detector
C-Tec Addressable Heat Detector
C-Tec Addressable Smoke Detector
C-Tec Addressable Smoke Detector
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
Cooper Menvier MBD50R Conventional Infra-Red Beam Receiver complete with mounting base – 50m Range
Cooper Menvier MBD50R Conventional Infra-Red Beam Receiver complete with mounting base – 50m Range
