Informed Systems Store is one of the most trusted and reliable companies in Kenya when it comes to the supply and installation of fire detection equipment such as fire alarms, smoke sensors, and fire fighting equipment. Call us today and schedule a site visit by our field technicians today.
Detection System
A system of sensors and associated interconnected equipment which detects the equipment which detects the presence of fire and provides a warning signal.
Detectors
A properly selected and installed detector can be a highly reliable fire sensor. We provide a full range of fire detection systems.
Smoke Detectors:– Aspirating – Ionization– Optical beam- Optical smoke
Flame Detectors:– Infra-red– Ultra-violet- IR/UV
Thermal (Heat) Detectors:– Fixed temperature- Rate of rise
- Low profile, two inches including the base
- Simple and reliable addressing without mechanical switches
- Automatic compensation for sensor contamination
- Built-in fire test feature
- Vandal resistance locking features
- Field cleanable
- IP rating: IP67
- Glass element
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
- High-quality natural rubber lining
- Flexible
- Durable
- Cold resistance
- Easy to install, mounting bracket included.
- Loud 85 dB alarm and LED warning light.
- High quality durable sensor.
- Self-diagnostic function by MCU intelligent software.
- Excellent reliability and high stability.
- Ideal for all kitchens.
- Manufactured to EN 1866-1
- CE Marked
- MED Approved – certified for marine use
- Fire extinguisher rating 144B and electrical fires
- Refillable stored pressure unit
- Rubber wheels for easy maneuverability
- Self-supporting stand
- Supplied with 5-meter hose
- Comfortable one-man operation
- MED Approved – certified for marine use
- 8 Flow
- DC8 Cylinder + Valve + Activation Mechanism (1 Piece )
- DC8 Wall Mount Bracket (1 Piece )
- Remote Pull Station (1 Piece )
- A Nozzle (6 Piece)
- F Nozzle (1 Piece)
- 182°C ThermoBulb Detector Set (1 Piece )
- Corner Pulley (3 Piece )
- Cylinder + Wet Chemical (1 Piece )
- Wall Mount Bracket (1 Piece)
- Pneumatic Valve (1 Piece )
- Pneumatic Manuel Activation Button (1 Piece)
- Discharge Hose (1 Piece)
- A Nozzle (1 Piece)
- F Nozzle (1 Piece)
- R Nozzle (1 Piece)
- Detection Tube (6×1 mm) (10 meters)
- Robust design
- Low current consumption
- Easy to install
- Maximum 110dB(A) at 1 metre (dependant on tone selected)
- 32 user-selectable tones
- Two programmable inputs.
- Phased evacuation facility.
- Adjustable contamination levels.
- Earth fault monitoring.
- 999 event monitoring.
- Third-party certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc = 3.8mA.
- IP33C rated.
- Certified to EN54 Parts 11 (LPCB) and 13 (BSI).
- ‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
- Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
- Quick visible alarm indication.
- Changeover contacts.
- IP24 rated.
- A high-quality programmable heat detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-5 & 17 and Kiwa Telefication certified to EN54-13.
- Can be programmed to operate as a Class A1R (rate of rise), Class A2 (64ºC fixed temperature) or Class B (76ºC fixed temperature) heat detector. The default setting is A2.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Different sensitivities can be selected for different times of the day (day/night, building occupied/unoccupied etc).
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC.
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
- A high-quality smoke detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-7 & 17 and Kiwa Telefication certified to EN54-13.
- Smart algorithms help reduce false alarms.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Drift compensation functionality.
- 0.16dB/m sensitivity/obscuration level.
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
- 8 zones panels
- Flexible, high specification system
- Surface or semi-flush mounting
- Simple “one-shot” auto-reset user test facility
- Maintenance free poly switch circuit protection, with auto reset
- Class change and programmable fire/fault relay as standard
- Quick and simple to install
- Simple two wire connection
- No power supply required
Honeywell Addressable Photoelectric Smoke Detector
SKU: N/AW5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
SKU: N/AW5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
SKU: N/AHM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
6KG DRY POWDER EXTINGUISHER
SKU: 536KG DRY POWDER EXTINGUISHER
Use for:
– Organic materials such as:
o Paper and cardboard
o Fabrics and textiles
o Wood and coal
– Flammable liquids, like paint and petrol
– Flammable gases, like liquid petroleum gas (LPG) and acetylene
Plus:
– Fires involving electrical equipment up to 1000v
PVC Canvas Delivery Hose
SKU: N/APVC Canvas Delivery Hose
Asenware LPG Gas Leak Detector With shutt off Valve
SKU: 926Asenware LPG Gas Leak Detector With shutt off Valve
2KG CO2 Fire Extinguisher
SKU: 2992KG CO2 Fire Extinguisher
It ceases fire by removing the oxygen of the fire triangle. They are usually used for Class B and electrical fires and are ineffective in the case of Class A fires. Are common firefighting tools, they are found almost everywhere. Unlike the foam type and powder type extinguishers, they do not leave any irritating foam or residue after extinguishing fire.
10kg CO2 Wheeled Fire Extinguisher
SKU: N/A10kg CO2 Wheeled Fire Extinguisher
Our 10kg CO2 fire extinguishers are for applications with a risk of large electrical fires or flammable liquids. Typical applications include boats, docks, hospitals, paint shops, and industrial units.
Inim ED100 Optical Smoke Detector
SKU: N/AED100
Optical smoke detector
The ED100 optical smoke detector is based on the Tyndall effect (diffusion of light) and provides firstrate early warning in the event of fire.
It offers wide-spectrum detection of smoke particles generated by the majority of fires. The newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen ensure high immunity to false alarms.
The sensitivity can be configured to suit a wide range of applications (sensitivity configurable as: 0.08dB/m; 0.10dB/m; 0.12dB/m; 0.15dB/m).
Defender DC8S Mechanical Kitchen Suppression System
SKU: N/ADefender DC8S Mechanical Kitchen Suppression System
Defender DPSS Pneumatic Kitchen Suppression System
SKU: N/ADefender DPSS Pneumatic Kitchen Suppression System
4 Flows
Hochiki Conventional Wall Sounder
SKU: N/AHochiki Conventional Wall Sounder
C-TEC XFP 2 Loop 32 Zone Addressable Fire Alarm Panel
SKU: N/AC-TEC XFP 2 Loop 32 Zone Addressable Fire Alarm Panel
Buy Online at the Best Prices in Nairobi Kenya
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
SKU: N/ACTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
C-Tec Conventional Manual Call Point
SKU: N/AC-Tec Conventional Manual Call Point
C-Tec Addressable Heat Detector
SKU: N/AC-Tec Addressable Heat Detector
C-Tec Addressable Smoke Detector
SKU: N/AC-Tec Addressable Smoke Detector
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
SKU: N/ACooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
SKU: N/ACooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
- Low profile, two inches including the base
- Simple and reliable addressing without mechanical switches
- Automatic compensation for sensor contamination
- Built-in fire test feature
- Vandal resistance locking features
- Field cleanable
- IP rating: IP67
- Glass element
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
- High-quality natural rubber lining
- Flexible
- Durable
- Cold resistance
- Easy to install, mounting bracket included.
- Loud 85 dB alarm and LED warning light.
- High quality durable sensor.
- Self-diagnostic function by MCU intelligent software.
- Excellent reliability and high stability.
- Ideal for all kitchens.
- Manufactured to EN 1866-1
- CE Marked
- MED Approved – certified for marine use
- Fire extinguisher rating 144B and electrical fires
- Refillable stored pressure unit
- Rubber wheels for easy maneuverability
- Self-supporting stand
- Supplied with 5-meter hose
- Comfortable one-man operation
- MED Approved – certified for marine use
- 8 Flow
- DC8 Cylinder + Valve + Activation Mechanism (1 Piece )
- DC8 Wall Mount Bracket (1 Piece )
- Remote Pull Station (1 Piece )
- A Nozzle (6 Piece)
- F Nozzle (1 Piece)
- 182°C ThermoBulb Detector Set (1 Piece )
- Corner Pulley (3 Piece )
- Cylinder + Wet Chemical (1 Piece )
- Wall Mount Bracket (1 Piece)
- Pneumatic Valve (1 Piece )
- Pneumatic Manuel Activation Button (1 Piece)
- Discharge Hose (1 Piece)
- A Nozzle (1 Piece)
- F Nozzle (1 Piece)
- R Nozzle (1 Piece)
- Detection Tube (6×1 mm) (10 meters)
- Robust design
- Low current consumption
- Easy to install
- Maximum 110dB(A) at 1 metre (dependant on tone selected)
- 32 user-selectable tones
- Two programmable inputs.
- Phased evacuation facility.
- Adjustable contamination levels.
- Earth fault monitoring.
- 999 event monitoring.
- Third-party certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc = 3.8mA.
- IP33C rated.
- Certified to EN54 Parts 11 (LPCB) and 13 (BSI).
- ‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
- Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
- Quick visible alarm indication.
- Changeover contacts.
- IP24 rated.
- A high-quality programmable heat detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-5 & 17 and Kiwa Telefication certified to EN54-13.
- Can be programmed to operate as a Class A1R (rate of rise), Class A2 (64ºC fixed temperature) or Class B (76ºC fixed temperature) heat detector. The default setting is A2.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Different sensitivities can be selected for different times of the day (day/night, building occupied/unoccupied etc).
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC.
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
- A high-quality smoke detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-7 & 17 and Kiwa Telefication certified to EN54-13.
- Smart algorithms help reduce false alarms.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Drift compensation functionality.
- 0.16dB/m sensitivity/obscuration level.
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
- 8 zones panels
- Flexible, high specification system
- Surface or semi-flush mounting
- Simple “one-shot” auto-reset user test facility
- Maintenance free poly switch circuit protection, with auto reset
- Class change and programmable fire/fault relay as standard
- Quick and simple to install
- Simple two wire connection
- No power supply required
Honeywell Addressable Photoelectric Smoke Detector
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
6KG DRY POWDER EXTINGUISHER
6KG DRY POWDER EXTINGUISHER
Use for:
– Organic materials such as:
o Paper and cardboard
o Fabrics and textiles
o Wood and coal
– Flammable liquids, like paint and petrol
– Flammable gases, like liquid petroleum gas (LPG) and acetylene
Plus:
– Fires involving electrical equipment up to 1000v
PVC Canvas Delivery Hose
PVC Canvas Delivery Hose
Asenware LPG Gas Leak Detector With shutt off Valve
Asenware LPG Gas Leak Detector With shutt off Valve
2KG CO2 Fire Extinguisher
2KG CO2 Fire Extinguisher
It ceases fire by removing the oxygen of the fire triangle. They are usually used for Class B and electrical fires and are ineffective in the case of Class A fires. Are common firefighting tools, they are found almost everywhere. Unlike the foam type and powder type extinguishers, they do not leave any irritating foam or residue after extinguishing fire.
10kg CO2 Wheeled Fire Extinguisher
10kg CO2 Wheeled Fire Extinguisher
Our 10kg CO2 fire extinguishers are for applications with a risk of large electrical fires or flammable liquids. Typical applications include boats, docks, hospitals, paint shops, and industrial units.
Inim ED100 Optical Smoke Detector
ED100
Optical smoke detector
The ED100 optical smoke detector is based on the Tyndall effect (diffusion of light) and provides firstrate early warning in the event of fire.
It offers wide-spectrum detection of smoke particles generated by the majority of fires. The newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen ensure high immunity to false alarms.
The sensitivity can be configured to suit a wide range of applications (sensitivity configurable as: 0.08dB/m; 0.10dB/m; 0.12dB/m; 0.15dB/m).
Defender DC8S Mechanical Kitchen Suppression System
Defender DC8S Mechanical Kitchen Suppression System
Defender DPSS Pneumatic Kitchen Suppression System
Defender DPSS Pneumatic Kitchen Suppression System
4 Flows
Hochiki Conventional Wall Sounder
Hochiki Conventional Wall Sounder
C-TEC XFP 2 Loop 32 Zone Addressable Fire Alarm Panel
C-TEC XFP 2 Loop 32 Zone Addressable Fire Alarm Panel
Buy Online at the Best Prices in Nairobi Kenya
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
C-Tec Conventional Manual Call Point
C-Tec Conventional Manual Call Point
C-Tec Addressable Heat Detector
C-Tec Addressable Heat Detector
C-Tec Addressable Smoke Detector
C-Tec Addressable Smoke Detector
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
- Low profile, two inches including the base
- Simple and reliable addressing without mechanical switches
- Automatic compensation for sensor contamination
- Built-in fire test feature
- Vandal resistance locking features
- Field cleanable
- IP rating: IP67
- Glass element
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
- High-quality natural rubber lining
- Flexible
- Durable
- Cold resistance
- Easy to install, mounting bracket included.
- Loud 85 dB alarm and LED warning light.
- High quality durable sensor.
- Self-diagnostic function by MCU intelligent software.
- Excellent reliability and high stability.
- Ideal for all kitchens.
- Manufactured to EN 1866-1
- CE Marked
- MED Approved – certified for marine use
- Fire extinguisher rating 144B and electrical fires
- Refillable stored pressure unit
- Rubber wheels for easy maneuverability
- Self-supporting stand
- Supplied with 5-meter hose
- Comfortable one-man operation
- MED Approved – certified for marine use
- 8 Flow
- DC8 Cylinder + Valve + Activation Mechanism (1 Piece )
- DC8 Wall Mount Bracket (1 Piece )
- Remote Pull Station (1 Piece )
- A Nozzle (6 Piece)
- F Nozzle (1 Piece)
- 182°C ThermoBulb Detector Set (1 Piece )
- Corner Pulley (3 Piece )
- Cylinder + Wet Chemical (1 Piece )
- Wall Mount Bracket (1 Piece)
- Pneumatic Valve (1 Piece )
- Pneumatic Manuel Activation Button (1 Piece)
- Discharge Hose (1 Piece)
- A Nozzle (1 Piece)
- F Nozzle (1 Piece)
- R Nozzle (1 Piece)
- Detection Tube (6×1 mm) (10 meters)
- Robust design
- Low current consumption
- Easy to install
- Maximum 110dB(A) at 1 metre (dependant on tone selected)
- 32 user-selectable tones
- Two programmable inputs.
- Phased evacuation facility.
- Adjustable contamination levels.
- Earth fault monitoring.
- 999 event monitoring.
- Third-party certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc = 3.8mA.
- IP33C rated.
- Certified to EN54 Parts 11 (LPCB) and 13 (BSI).
- ‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
- Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
- Quick visible alarm indication.
- Changeover contacts.
- IP24 rated.
- A high-quality programmable heat detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-5 & 17 and Kiwa Telefication certified to EN54-13.
- Can be programmed to operate as a Class A1R (rate of rise), Class A2 (64ºC fixed temperature) or Class B (76ºC fixed temperature) heat detector. The default setting is A2.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Different sensitivities can be selected for different times of the day (day/night, building occupied/unoccupied etc).
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC.
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
- A high-quality smoke detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-7 & 17 and Kiwa Telefication certified to EN54-13.
- Smart algorithms help reduce false alarms.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Drift compensation functionality.
- 0.16dB/m sensitivity/obscuration level.
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
- 8 zones panels
- Flexible, high specification system
- Surface or semi-flush mounting
- Simple “one-shot” auto-reset user test facility
- Maintenance free poly switch circuit protection, with auto reset
- Class change and programmable fire/fault relay as standard
- Quick and simple to install
- Simple two wire connection
- No power supply required
Honeywell Addressable Photoelectric Smoke Detector
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
6KG DRY POWDER EXTINGUISHER
6KG DRY POWDER EXTINGUISHER
Use for:
– Organic materials such as:
o Paper and cardboard
o Fabrics and textiles
o Wood and coal
– Flammable liquids, like paint and petrol
– Flammable gases, like liquid petroleum gas (LPG) and acetylene
Plus:
– Fires involving electrical equipment up to 1000v
PVC Canvas Delivery Hose
PVC Canvas Delivery Hose
Asenware LPG Gas Leak Detector With shutt off Valve
Asenware LPG Gas Leak Detector With shutt off Valve
2KG CO2 Fire Extinguisher
2KG CO2 Fire Extinguisher
It ceases fire by removing the oxygen of the fire triangle. They are usually used for Class B and electrical fires and are ineffective in the case of Class A fires. Are common firefighting tools, they are found almost everywhere. Unlike the foam type and powder type extinguishers, they do not leave any irritating foam or residue after extinguishing fire.
10kg CO2 Wheeled Fire Extinguisher
10kg CO2 Wheeled Fire Extinguisher
Our 10kg CO2 fire extinguishers are for applications with a risk of large electrical fires or flammable liquids. Typical applications include boats, docks, hospitals, paint shops, and industrial units.
Inim ED100 Optical Smoke Detector
ED100
Optical smoke detector
The ED100 optical smoke detector is based on the Tyndall effect (diffusion of light) and provides firstrate early warning in the event of fire.
It offers wide-spectrum detection of smoke particles generated by the majority of fires. The newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen ensure high immunity to false alarms.
The sensitivity can be configured to suit a wide range of applications (sensitivity configurable as: 0.08dB/m; 0.10dB/m; 0.12dB/m; 0.15dB/m).
Defender DC8S Mechanical Kitchen Suppression System
Defender DC8S Mechanical Kitchen Suppression System
Defender DPSS Pneumatic Kitchen Suppression System
Defender DPSS Pneumatic Kitchen Suppression System
4 Flows
Hochiki Conventional Wall Sounder
Hochiki Conventional Wall Sounder
C-TEC XFP 2 Loop 32 Zone Addressable Fire Alarm Panel
C-TEC XFP 2 Loop 32 Zone Addressable Fire Alarm Panel
Buy Online at the Best Prices in Nairobi Kenya
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
C-Tec Conventional Manual Call Point
C-Tec Conventional Manual Call Point
C-Tec Addressable Heat Detector
C-Tec Addressable Heat Detector
C-Tec Addressable Smoke Detector
C-Tec Addressable Smoke Detector
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
- Low profile, two inches including the base
- Simple and reliable addressing without mechanical switches
- Automatic compensation for sensor contamination
- Built-in fire test feature
- Vandal resistance locking features
- Field cleanable
- IP rating: IP67
- Glass element
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
- High-quality natural rubber lining
- Flexible
- Durable
- Cold resistance
- Easy to install, mounting bracket included.
- Loud 85 dB alarm and LED warning light.
- High quality durable sensor.
- Self-diagnostic function by MCU intelligent software.
- Excellent reliability and high stability.
- Ideal for all kitchens.
- Manufactured to EN 1866-1
- CE Marked
- MED Approved – certified for marine use
- Fire extinguisher rating 144B and electrical fires
- Refillable stored pressure unit
- Rubber wheels for easy maneuverability
- Self-supporting stand
- Supplied with 5-meter hose
- Comfortable one-man operation
- MED Approved – certified for marine use
- 8 Flow
- DC8 Cylinder + Valve + Activation Mechanism (1 Piece )
- DC8 Wall Mount Bracket (1 Piece )
- Remote Pull Station (1 Piece )
- A Nozzle (6 Piece)
- F Nozzle (1 Piece)
- 182°C ThermoBulb Detector Set (1 Piece )
- Corner Pulley (3 Piece )
- Cylinder + Wet Chemical (1 Piece )
- Wall Mount Bracket (1 Piece)
- Pneumatic Valve (1 Piece )
- Pneumatic Manuel Activation Button (1 Piece)
- Discharge Hose (1 Piece)
- A Nozzle (1 Piece)
- F Nozzle (1 Piece)
- R Nozzle (1 Piece)
- Detection Tube (6×1 mm) (10 meters)
- Robust design
- Low current consumption
- Easy to install
- Maximum 110dB(A) at 1 metre (dependant on tone selected)
- 32 user-selectable tones
- Two programmable inputs.
- Phased evacuation facility.
- Adjustable contamination levels.
- Earth fault monitoring.
- 999 event monitoring.
- Third-party certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc = 3.8mA.
- IP33C rated.
- Certified to EN54 Parts 11 (LPCB) and 13 (BSI).
- ‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
- Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
- Quick visible alarm indication.
- Changeover contacts.
- IP24 rated.
- A high-quality programmable heat detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-5 & 17 and Kiwa Telefication certified to EN54-13.
- Can be programmed to operate as a Class A1R (rate of rise), Class A2 (64ºC fixed temperature) or Class B (76ºC fixed temperature) heat detector. The default setting is A2.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Different sensitivities can be selected for different times of the day (day/night, building occupied/unoccupied etc).
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC.
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
- A high-quality smoke detector for use with C-TEC’s XFP & ZFP ‘CAST’ protocol Addressable Fire Panels.
- LPCB certified to EN54-7 & 17 and Kiwa Telefication certified to EN54-13.
- Smart algorithms help reduce false alarms.
- Onboard short circuit loop isolator.
- Includes two 8mm x 2mm ultra-bright red LED indicating strips.
- Drift compensation functionality.
- 0.16dB/m sensitivity/obscuration level.
- 5mA typical alarm current (370uA typical quiescent) @ 22-40V DC
- Programmable multi-function status LED.
- Compatible with C-TEC’s CA408 CAST base c/w integrated locking mechanism & ID tag.
- 8 zones panels
- Flexible, high specification system
- Surface or semi-flush mounting
- Simple “one-shot” auto-reset user test facility
- Maintenance free poly switch circuit protection, with auto reset
- Class change and programmable fire/fault relay as standard
- Quick and simple to install
- Simple two wire connection
- No power supply required
Honeywell Addressable Photoelectric Smoke Detector
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
6KG DRY POWDER EXTINGUISHER
6KG DRY POWDER EXTINGUISHER
Use for:
– Organic materials such as:
o Paper and cardboard
o Fabrics and textiles
o Wood and coal
– Flammable liquids, like paint and petrol
– Flammable gases, like liquid petroleum gas (LPG) and acetylene
Plus:
– Fires involving electrical equipment up to 1000v
PVC Canvas Delivery Hose
PVC Canvas Delivery Hose
Asenware LPG Gas Leak Detector With shutt off Valve
Asenware LPG Gas Leak Detector With shutt off Valve
2KG CO2 Fire Extinguisher
2KG CO2 Fire Extinguisher
It ceases fire by removing the oxygen of the fire triangle. They are usually used for Class B and electrical fires and are ineffective in the case of Class A fires. Are common firefighting tools, they are found almost everywhere. Unlike the foam type and powder type extinguishers, they do not leave any irritating foam or residue after extinguishing fire.
10kg CO2 Wheeled Fire Extinguisher
10kg CO2 Wheeled Fire Extinguisher
Our 10kg CO2 fire extinguishers are for applications with a risk of large electrical fires or flammable liquids. Typical applications include boats, docks, hospitals, paint shops, and industrial units.
Inim ED100 Optical Smoke Detector
ED100
Optical smoke detector
The ED100 optical smoke detector is based on the Tyndall effect (diffusion of light) and provides firstrate early warning in the event of fire.
It offers wide-spectrum detection of smoke particles generated by the majority of fires. The newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen ensure high immunity to false alarms.
The sensitivity can be configured to suit a wide range of applications (sensitivity configurable as: 0.08dB/m; 0.10dB/m; 0.12dB/m; 0.15dB/m).
Defender DC8S Mechanical Kitchen Suppression System
Defender DC8S Mechanical Kitchen Suppression System
Defender DPSS Pneumatic Kitchen Suppression System
Defender DPSS Pneumatic Kitchen Suppression System
4 Flows
Hochiki Conventional Wall Sounder
Hochiki Conventional Wall Sounder
C-TEC XFP 2 Loop 32 Zone Addressable Fire Alarm Panel
C-TEC XFP 2 Loop 32 Zone Addressable Fire Alarm Panel
Buy Online at the Best Prices in Nairobi Kenya