Apollo XP95 Ionisation Smoke Detector

Availability:In Stock!

Fully compatible with C-TEC’s XFP & ZFP XP95/Discovery Addressable Fire Panels.
Uses a low activity radioactive foil to detect fires by irradiating the air in the smoke chambers causing a current flow. If smoke enters the chamber, the current flow is reduced leading to an alarm.
Responds well to fast-burning, flaming fires.
Designed to operate in a variety of environments.
Red LED illuminates when the detector is in alarm.
Certified to EN54-7 by the LPCB.
Requires a 45681-210APO standard base or 45681-242APO low power relay base.
‘Xpert’ card addressed for speedy installation.

KSh6,500.00 Excl. VAT

Compare

Description

Approvals/certifications	Certified to EN54-7 by the LPCB.
Compatibility	Compatible with C-TEC’s XFP/ZFP XP95/Discovery Addressable Fire Panels.
Application/operation	Uses a low activity radioactive foil to detect fires by irradiating the air in the smoke chambers causing a current flow. If smoke enters the chamber, the current flow is reduced leading to an alarm. Very good at detecting flaming high heat fires.
Application temperature	n/a
Static response temperature	n/a
Supply wiring	2-wire, polarity insensitive.
Supply/operating voltage	17 to 28V DC.
Quiescent current	280µA average; 500µA peak.
Alarm current	2mA (LED illuminated).
Indicators	Clear LED emitting red light when in alarm.
Connections	L1&L2 supply in/out; R remote LED Ve connection; -R remote LED -Ve connection. (4mA remote LED current @ 5V measured across remote load).
Product dimensions (mm)	100mm diameter x 42 mm H (not in base). 50mm height when in base.
Construction & finish	White polycarbonate V.O rated rated to UL94. Stainless steel terminals.
IP Rating	IP23D.
Weight	105g (not in base); 161g (in base).
Operating conditions/temperature	-20ºC to 60ºC.
Notes	Requires a BF308XP standard base or BF308XPR low power relay base. 1mA power up surge current for 0.3 seconds.