- This device also offers protection against- high voltage, low voltage, spike/surge, lightning
- Socket Type: BS1363 (90degree) Outlet Module
- Socket Quantity: 10 way
- Input Cable : 2 Meter
- Master Switch : has an on or off master switch.
- Surge Protection : No
- Rating Current : 13 Amp
- In addition it has a Rating voltage : 250VAC 50/60Hz
- CE Approved : Yes
- Max. Power : 3250W
- Length : 680 mm
- Height : 44.4 mm (1U)
- Depth : 44.4 mm
- Colour : Black
- RoHS : Yes
- Reversible ratchet handle
- 10 pc bit group
- 5 pcs socket
- Anti static anti short wrist band
- 6 pcs precision screw driver
- 4-1/2″ side cutter
- 5″ long nose piller
- Flash light
- Rj 45 modular crimping tool
- 8 pcs modular plug
- Protection cap
- Cable tie
- Lan cable tester
- Rack mount 19″ form factor with 1U height
- Suitable for CAT6 UTP Ethernet cables using Gigabit
- Quality pressed Steel construction with individual port labelling
- Gold over Nickel plated jack contacts.
- Phosphor Bronze & Nickel plated IDC terminals.
- IDC terminals accept 22 to 26AWG solid and stranded wires
- Horizontal Punch Down
-
- Standards
- IEEE 802.3 (10Base-T Ethernet)
- IEEE 802.3u (100Base-TX Fast Ethernet)
- IEEE 802.3ab (1000Base-T Gigabit Ethernet)
- Anti-Static/Anti Shock Wrist Band
- UTP/STP Strips & Cuts Tool
- 4 1/2″ Side Cutter
- Long Nose Pliers
- RJ45 Modular Crimping Tool
- 8P8C Modular Plug
- Protection Cap
- LAN Cable tester
- See through Blow Mold Case
- Provides enhanced EMI protection & improved Alien Cross Talk and return loss
- Pre-terminated with quality shielded plug and anti-snag strain relief boots
- Stranded cable provides pair symmetry and robust strain relief
- 100% Factory tested to ensure optimal performance and compliance
- Exceeds 10G channel and component requirements
- Suitable for high-density data center blade equipment.
- 10G channel performance when installed as a complete Giganet CAT6A system.
- Supported Cables : UTP / STP RJ45 / RJ11 / Metal Cable
- Supported Test : Shielded and Unshielded RJ45 (8P8C)
- Tone Frequency : 200Hz
- Max. Distance of Transmission : Up to 2 Kilometers
- Max. Working Current : Less than 10mA
- Volume Regulate Function : Audio Volume Level Control
- Tone Mode : 2 Tones, Adjustable
- Max. Signal Voltage : 8Vp-p
- LED Lights Display : Wiremap, Tone, Tracing
- Voltage Protection : AC 60V / DC 42V
- 100 PCS RJ45 plugs for unshielded twisted pair solid or stranded cable, supports 24 to 26 AWG round or flat network cable.
- Gold-plated contacts provide reliable performance for a Gigabit Ethernet-rated network.
- ROHS compliant, and the color is Transparent, allow indicator light penetration better.
- Easy for carrying, Gold plated connectors resist corrosion, improve the signal performance.
- CableCreation provides in 24-month supreme warranty service, if you have any questions, please contact us as soon as possible, we will answer your questions 24 hours a day.
- Tips: This Connector is not RJ45 pass through connector, If you need RJ45 pass through connectors, please purchase through this ASIN: B08HLJJT9D.
- Toolless adapter connection.Female to female connectors. Just plug one cable into the front and one into the back.
- All standard sizes. Screws included.
- Keystone jacks are removable unlike competitor plates for future upgrades.
- It is compatible with Cat6, Cat5e network ethernet cable.
- Toolless adapter connection.Female to female connectors. Just plug one cable into the front and one into the back.
- All standard sizes. Screws included.
- Keystone jacks are removable unlike competitor plates for future upgrades.
- It is compatible with Cat6, Cat5e network ethernet cable.
- Flexible Installation – Install from either front or rear of the faceplate
- Quick Identification – Colored Icons provided for port identification
- Easy Termination – Punch down with standard 110 termination tools
- Cat6 Cat5e Cat5 Compatible.
- Keystone Wall Plate / Face Plate / Patch Panel Compatible.
- T568A and T568B color coding.
- Number of ports – loaded: 24
- Type of connector: RJ45 8(8)
- Shielded: no
- Category: 6
- Connection type: LSA
- Number of rack units (ru): 1
- Can test RJ11/RJ45/USB/BNC cables
- Detachable module for testing two remote points
- Terminator 25 Ohm / 50 Ohm indications
- Straight or crossover indication
- Powered by 9V alkaline battery
- Palm size with carrying bag
- Automatic deactivation
- Application: Cutting network cable
- Brand Name: OUBAO
- Material: Stainless Steel
- Durable Crimping/Cutting/Stripping 3 in 1 Tool
- Good for RJ-45- RJ-11 RJ-12 connectors.
- Suitable for Cat5 and Cat5e cable
- Heavy-Duty
- Easy to use
- Portalbe style with perfect shape
- Rugged Carbon Hardened Steel Construction
- Supports a link length of 26 meters on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF).
- Using 2000 MHz*km MMF (OM3), up to 300-meter link lengths are possible.
- Using 4700 MHz*km MMF (OM4), up to 400-meter link lengths are possible.
KSh75,000.00 MikroTik 24 Port Gigabit Ethernet Switch (CRS328-24P-4S+RM)
SKU: N/AMikroTik 24 Port Gigabit Ethernet Switch (CRS328-24P-4S+RM)
CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included).
KSh2,500.00 Excl. VAT
10 way PDU UK plug
SKU: N/AMetallic 10 ways Power Distriution Unit PDU
KSh9,200.00 Excl. VAT
S-TEK Networking Toolkit 50 Pieces
SKU: N/AS-TEK Networking Toolkit 50 Pieces
KSh280.00 Excl. VAT
nylon cable tie 3.5x200mm
SKU: N/Anylon cable tie 3.5x200mm
Features
Dimensions:
3.50 mm (W) x 200.00 mm (L)
Colour:
Black or white
Brady Material Type:
Nylon
Application(s):
Inspection tagging
KSh3,200.00 Excl. VAT
Giganet 2U cable Manager closed
SKU: N/AGiganet 2U cable Manager closed
Features
Metal or Plastic variant
Helping to alleviate strain on cable
Improved appearance to cabinet installations
Excellent patch lead management
Finished in black to match 19″ equipment such as patch panels
Shop now at www.informedstore.co.ke or call +254 793 000 111
KSh9,000.00 giganet patch panel 48 ports
SKU: N/Agiganet patch panel 48 ports
These fully compliant panels are simple to install and provide excellent performance at a great price.
Numerical identification on all outlets
Labeling fields with writeable surface
Six port blocks for ease of management
Rear Wire manager guide included
IDC punch down termination
Cage nuts included *Color: Matt Black.
KSh6,000.00 giganet patch panel 24 ports
SKU: N/Agiganet patch panel 24 ports
Specifications
KSh5,200.00 Excl. VAT
Network Tool Kit 18pcs
SKU: N/ANetwork Tool Kit 18pcs
Networking tool kit with 18 different tools ideal for basic networking tasks including;
KSh800.00 Excl. VAT
Giganet CAT6A Shielded RJ45 10G Keystone
SKU: N/AGiganet CAT6A Shielded RJ45 10G Keystone
Features
KSh450.00 Excl. VAT
Giganet GN-C6-FP-01 1Port Faceplate
SKU: N/AGiganet GN-C6-FP-01 1Port Faceplate
specifications
Category 6 TIA/EIA 568-B.2-1, EN50173-1 & ISO/IEC 11801.2
• 25mm W X 21mm D X 38.5mm H
• Ideal for Ackerman & Dado Floor Boxes
• Industry Standard LJ6C Aperture
• Unique Shuttered Module to prevent dust contamination
• Compact Low profile Design with LSA Style Termination Blocks
KSh3,000.00 Wire tracker/Tracer
SKU: N/AWire tracker/Tracer
Features
KSh1,100.00 Excl. VAT
RJ45 cat 6 Jack Connectors 100Pcs
SKU: N/ARJ45 cat 6 Jack Connectors 100Pcs
Features
KSh350.00 Excl. VAT
Apkr Faceplates Double
SKU: N/AApkr Faceplates Double
Features
KSh250.00 Excl. VAT
Apkr Faceplates Single
SKU: N/AApkr Faceplates Single
Features
KSh250.00 Excl. VAT
Apkr cat6 Modules
SKU: N/AApkr cat6 Modules
Shop now at www.informedstore.co.ke or call +254 793 000 111
KSh2,500.00 Generic APKR Patch panel 24port
SKU: N/AGeneric APKR Patch panel 24port
Key Features
KSh2,200.00 Excl. VAT
Cable tester 4 in 1 Generic
SKU: N/ACable tester 4 in 1 Generic
Features:
KSh400.00 Crimping Tool
SKU: N/ACrimping Tool
KSh12,200.00 Excl. VAT
Cisco 10GBASE-SR SFP Module SFP-10G-SR
SKU: N/ACisco 10GBASE-SR SFP Module SFP-10G-SR
KSh12,200.00 Excl. VAT
Cisco SFP-10G-LR, 10GBASE-LR SFP+ Module
SKU: N/ACisco SFP-10G-LR, 10GBASE-LR SFP+ Module
Features
● Industry’s smallest 10G form factor for greatest density per chassis
● Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing)
● Supports “pay-as-you-populate” model for investment protection and ease of technology migration
● Digital optical monitoring capability for strong diagnostic capabilities
● Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link
● Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco
- This device also offers protection against- high voltage, low voltage, spike/surge, lightning
- Socket Type: BS1363 (90degree) Outlet Module
- Socket Quantity: 10 way
- Input Cable : 2 Meter
- Master Switch : has an on or off master switch.
- Surge Protection : No
- Rating Current : 13 Amp
- In addition it has a Rating voltage : 250VAC 50/60Hz
- CE Approved : Yes
- Max. Power : 3250W
- Length : 680 mm
- Height : 44.4 mm (1U)
- Depth : 44.4 mm
- Colour : Black
- RoHS : Yes
- Reversible ratchet handle
- 10 pc bit group
- 5 pcs socket
- Anti static anti short wrist band
- 6 pcs precision screw driver
- 4-1/2″ side cutter
- 5″ long nose piller
- Flash light
- Rj 45 modular crimping tool
- 8 pcs modular plug
- Protection cap
- Cable tie
- Lan cable tester
- Rack mount 19″ form factor with 1U height
- Suitable for CAT6 UTP Ethernet cables using Gigabit
- Quality pressed Steel construction with individual port labelling
- Gold over Nickel plated jack contacts.
- Phosphor Bronze & Nickel plated IDC terminals.
- IDC terminals accept 22 to 26AWG solid and stranded wires
- Horizontal Punch Down
-
- Standards
- IEEE 802.3 (10Base-T Ethernet)
- IEEE 802.3u (100Base-TX Fast Ethernet)
- IEEE 802.3ab (1000Base-T Gigabit Ethernet)
- Anti-Static/Anti Shock Wrist Band
- UTP/STP Strips & Cuts Tool
- 4 1/2″ Side Cutter
- Long Nose Pliers
- RJ45 Modular Crimping Tool
- 8P8C Modular Plug
- Protection Cap
- LAN Cable tester
- See through Blow Mold Case
- Provides enhanced EMI protection & improved Alien Cross Talk and return loss
- Pre-terminated with quality shielded plug and anti-snag strain relief boots
- Stranded cable provides pair symmetry and robust strain relief
- 100% Factory tested to ensure optimal performance and compliance
- Exceeds 10G channel and component requirements
- Suitable for high-density data center blade equipment.
- 10G channel performance when installed as a complete Giganet CAT6A system.
- Supported Cables : UTP / STP RJ45 / RJ11 / Metal Cable
- Supported Test : Shielded and Unshielded RJ45 (8P8C)
- Tone Frequency : 200Hz
- Max. Distance of Transmission : Up to 2 Kilometers
- Max. Working Current : Less than 10mA
- Volume Regulate Function : Audio Volume Level Control
- Tone Mode : 2 Tones, Adjustable
- Max. Signal Voltage : 8Vp-p
- LED Lights Display : Wiremap, Tone, Tracing
- Voltage Protection : AC 60V / DC 42V
- 100 PCS RJ45 plugs for unshielded twisted pair solid or stranded cable, supports 24 to 26 AWG round or flat network cable.
- Gold-plated contacts provide reliable performance for a Gigabit Ethernet-rated network.
- ROHS compliant, and the color is Transparent, allow indicator light penetration better.
- Easy for carrying, Gold plated connectors resist corrosion, improve the signal performance.
- CableCreation provides in 24-month supreme warranty service, if you have any questions, please contact us as soon as possible, we will answer your questions 24 hours a day.
- Tips: This Connector is not RJ45 pass through connector, If you need RJ45 pass through connectors, please purchase through this ASIN: B08HLJJT9D.
- Toolless adapter connection.Female to female connectors. Just plug one cable into the front and one into the back.
- All standard sizes. Screws included.
- Keystone jacks are removable unlike competitor plates for future upgrades.
- It is compatible with Cat6, Cat5e network ethernet cable.
- Toolless adapter connection.Female to female connectors. Just plug one cable into the front and one into the back.
- All standard sizes. Screws included.
- Keystone jacks are removable unlike competitor plates for future upgrades.
- It is compatible with Cat6, Cat5e network ethernet cable.
- Flexible Installation – Install from either front or rear of the faceplate
- Quick Identification – Colored Icons provided for port identification
- Easy Termination – Punch down with standard 110 termination tools
- Cat6 Cat5e Cat5 Compatible.
- Keystone Wall Plate / Face Plate / Patch Panel Compatible.
- T568A and T568B color coding.
- Number of ports – loaded: 24
- Type of connector: RJ45 8(8)
- Shielded: no
- Category: 6
- Connection type: LSA
- Number of rack units (ru): 1
- Can test RJ11/RJ45/USB/BNC cables
- Detachable module for testing two remote points
- Terminator 25 Ohm / 50 Ohm indications
- Straight or crossover indication
- Powered by 9V alkaline battery
- Palm size with carrying bag
- Automatic deactivation
- Application: Cutting network cable
- Brand Name: OUBAO
- Material: Stainless Steel
- Durable Crimping/Cutting/Stripping 3 in 1 Tool
- Good for RJ-45- RJ-11 RJ-12 connectors.
- Suitable for Cat5 and Cat5e cable
- Heavy-Duty
- Easy to use
- Portalbe style with perfect shape
- Rugged Carbon Hardened Steel Construction
- Supports a link length of 26 meters on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF).
- Using 2000 MHz*km MMF (OM3), up to 300-meter link lengths are possible.
- Using 4700 MHz*km MMF (OM4), up to 400-meter link lengths are possible.
MikroTik 24 Port Gigabit Ethernet Switch (CRS328-24P-4S+RM)
MikroTik 24 Port Gigabit Ethernet Switch (CRS328-24P-4S+RM)
CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included).
10 way PDU UK plug
Metallic 10 ways Power Distriution Unit PDU
S-TEK Networking Toolkit 50 Pieces
S-TEK Networking Toolkit 50 Pieces
nylon cable tie 3.5x200mm
nylon cable tie 3.5x200mm
Features
Dimensions:
3.50 mm (W) x 200.00 mm (L)
Colour:
Black or white
Brady Material Type:
Nylon
Application(s):
Inspection tagging
Giganet 2U cable Manager closed
Giganet 2U cable Manager closed
Features
Metal or Plastic variant
Helping to alleviate strain on cable
Improved appearance to cabinet installations
Excellent patch lead management
Finished in black to match 19″ equipment such as patch panels
Shop now at www.informedstore.co.ke or call +254 793 000 111
giganet patch panel 48 ports
giganet patch panel 48 ports
These fully compliant panels are simple to install and provide excellent performance at a great price.
Numerical identification on all outlets
Labeling fields with writeable surface
Six port blocks for ease of management
Rear Wire manager guide included
IDC punch down termination
Cage nuts included *Color: Matt Black.
giganet patch panel 24 ports
giganet patch panel 24 ports
Specifications
Network Tool Kit 18pcs
Network Tool Kit 18pcs
Networking tool kit with 18 different tools ideal for basic networking tasks including;
Giganet CAT6A Shielded RJ45 10G Keystone
Giganet CAT6A Shielded RJ45 10G Keystone
Features
Giganet GN-C6-FP-01 1Port Faceplate
Giganet GN-C6-FP-01 1Port Faceplate
specifications
Category 6 TIA/EIA 568-B.2-1, EN50173-1 & ISO/IEC 11801.2
• 25mm W X 21mm D X 38.5mm H
• Ideal for Ackerman & Dado Floor Boxes
• Industry Standard LJ6C Aperture
• Unique Shuttered Module to prevent dust contamination
• Compact Low profile Design with LSA Style Termination Blocks
Wire tracker/Tracer
Wire tracker/Tracer
Features
RJ45 cat 6 Jack Connectors 100Pcs
RJ45 cat 6 Jack Connectors 100Pcs
Features
Apkr Faceplates Double
Apkr Faceplates Double
Features
Apkr Faceplates Single
Apkr Faceplates Single
Features
Apkr cat6 Modules
Apkr cat6 Modules
Shop now at www.informedstore.co.ke or call +254 793 000 111
Generic APKR Patch panel 24port
Generic APKR Patch panel 24port
Key Features
Cable tester 4 in 1 Generic
Cable tester 4 in 1 Generic
Features:
Crimping Tool
Crimping Tool
Cisco 10GBASE-SR SFP Module SFP-10G-SR
Cisco 10GBASE-SR SFP Module SFP-10G-SR
Cisco SFP-10G-LR, 10GBASE-LR SFP+ Module
Cisco SFP-10G-LR, 10GBASE-LR SFP+ Module
Features
● Industry’s smallest 10G form factor for greatest density per chassis
● Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing)
● Supports “pay-as-you-populate” model for investment protection and ease of technology migration
● Digital optical monitoring capability for strong diagnostic capabilities
● Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link
● Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco
- This device also offers protection against- high voltage, low voltage, spike/surge, lightning
- Socket Type: BS1363 (90degree) Outlet Module
- Socket Quantity: 10 way
- Input Cable : 2 Meter
- Master Switch : has an on or off master switch.
- Surge Protection : No
- Rating Current : 13 Amp
- In addition it has a Rating voltage : 250VAC 50/60Hz
- CE Approved : Yes
- Max. Power : 3250W
- Length : 680 mm
- Height : 44.4 mm (1U)
- Depth : 44.4 mm
- Colour : Black
- RoHS : Yes
- Reversible ratchet handle
- 10 pc bit group
- 5 pcs socket
- Anti static anti short wrist band
- 6 pcs precision screw driver
- 4-1/2″ side cutter
- 5″ long nose piller
- Flash light
- Rj 45 modular crimping tool
- 8 pcs modular plug
- Protection cap
- Cable tie
- Lan cable tester
- Rack mount 19″ form factor with 1U height
- Suitable for CAT6 UTP Ethernet cables using Gigabit
- Quality pressed Steel construction with individual port labelling
- Gold over Nickel plated jack contacts.
- Phosphor Bronze & Nickel plated IDC terminals.
- IDC terminals accept 22 to 26AWG solid and stranded wires
- Horizontal Punch Down
-
- Standards
- IEEE 802.3 (10Base-T Ethernet)
- IEEE 802.3u (100Base-TX Fast Ethernet)
- IEEE 802.3ab (1000Base-T Gigabit Ethernet)
- Anti-Static/Anti Shock Wrist Band
- UTP/STP Strips & Cuts Tool
- 4 1/2″ Side Cutter
- Long Nose Pliers
- RJ45 Modular Crimping Tool
- 8P8C Modular Plug
- Protection Cap
- LAN Cable tester
- See through Blow Mold Case
- Provides enhanced EMI protection & improved Alien Cross Talk and return loss
- Pre-terminated with quality shielded plug and anti-snag strain relief boots
- Stranded cable provides pair symmetry and robust strain relief
- 100% Factory tested to ensure optimal performance and compliance
- Exceeds 10G channel and component requirements
- Suitable for high-density data center blade equipment.
- 10G channel performance when installed as a complete Giganet CAT6A system.
- Supported Cables : UTP / STP RJ45 / RJ11 / Metal Cable
- Supported Test : Shielded and Unshielded RJ45 (8P8C)
- Tone Frequency : 200Hz
- Max. Distance of Transmission : Up to 2 Kilometers
- Max. Working Current : Less than 10mA
- Volume Regulate Function : Audio Volume Level Control
- Tone Mode : 2 Tones, Adjustable
- Max. Signal Voltage : 8Vp-p
- LED Lights Display : Wiremap, Tone, Tracing
- Voltage Protection : AC 60V / DC 42V
- 100 PCS RJ45 plugs for unshielded twisted pair solid or stranded cable, supports 24 to 26 AWG round or flat network cable.
- Gold-plated contacts provide reliable performance for a Gigabit Ethernet-rated network.
- ROHS compliant, and the color is Transparent, allow indicator light penetration better.
- Easy for carrying, Gold plated connectors resist corrosion, improve the signal performance.
- CableCreation provides in 24-month supreme warranty service, if you have any questions, please contact us as soon as possible, we will answer your questions 24 hours a day.
- Tips: This Connector is not RJ45 pass through connector, If you need RJ45 pass through connectors, please purchase through this ASIN: B08HLJJT9D.
- Toolless adapter connection.Female to female connectors. Just plug one cable into the front and one into the back.
- All standard sizes. Screws included.
- Keystone jacks are removable unlike competitor plates for future upgrades.
- It is compatible with Cat6, Cat5e network ethernet cable.
- Toolless adapter connection.Female to female connectors. Just plug one cable into the front and one into the back.
- All standard sizes. Screws included.
- Keystone jacks are removable unlike competitor plates for future upgrades.
- It is compatible with Cat6, Cat5e network ethernet cable.
- Flexible Installation – Install from either front or rear of the faceplate
- Quick Identification – Colored Icons provided for port identification
- Easy Termination – Punch down with standard 110 termination tools
- Cat6 Cat5e Cat5 Compatible.
- Keystone Wall Plate / Face Plate / Patch Panel Compatible.
- T568A and T568B color coding.
- Number of ports – loaded: 24
- Type of connector: RJ45 8(8)
- Shielded: no
- Category: 6
- Connection type: LSA
- Number of rack units (ru): 1
- Can test RJ11/RJ45/USB/BNC cables
- Detachable module for testing two remote points
- Terminator 25 Ohm / 50 Ohm indications
- Straight or crossover indication
- Powered by 9V alkaline battery
- Palm size with carrying bag
- Automatic deactivation
- Application: Cutting network cable
- Brand Name: OUBAO
- Material: Stainless Steel
- Durable Crimping/Cutting/Stripping 3 in 1 Tool
- Good for RJ-45- RJ-11 RJ-12 connectors.
- Suitable for Cat5 and Cat5e cable
- Heavy-Duty
- Easy to use
- Portalbe style with perfect shape
- Rugged Carbon Hardened Steel Construction
- Supports a link length of 26 meters on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF).
- Using 2000 MHz*km MMF (OM3), up to 300-meter link lengths are possible.
- Using 4700 MHz*km MMF (OM4), up to 400-meter link lengths are possible.
MikroTik 24 Port Gigabit Ethernet Switch (CRS328-24P-4S+RM)
MikroTik 24 Port Gigabit Ethernet Switch (CRS328-24P-4S+RM)
CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included).
10 way PDU UK plug
Metallic 10 ways Power Distriution Unit PDU
S-TEK Networking Toolkit 50 Pieces
S-TEK Networking Toolkit 50 Pieces
nylon cable tie 3.5x200mm
nylon cable tie 3.5x200mm
Features
Dimensions:
3.50 mm (W) x 200.00 mm (L)
Colour:
Black or white
Brady Material Type:
Nylon
Application(s):
Inspection tagging
Giganet 2U cable Manager closed
Giganet 2U cable Manager closed
Features
Metal or Plastic variant
Helping to alleviate strain on cable
Improved appearance to cabinet installations
Excellent patch lead management
Finished in black to match 19″ equipment such as patch panels
Shop now at www.informedstore.co.ke or call +254 793 000 111
giganet patch panel 48 ports
giganet patch panel 48 ports
These fully compliant panels are simple to install and provide excellent performance at a great price.
Numerical identification on all outlets
Labeling fields with writeable surface
Six port blocks for ease of management
Rear Wire manager guide included
IDC punch down termination
Cage nuts included *Color: Matt Black.
giganet patch panel 24 ports
giganet patch panel 24 ports
Specifications
Network Tool Kit 18pcs
Network Tool Kit 18pcs
Networking tool kit with 18 different tools ideal for basic networking tasks including;
Giganet CAT6A Shielded RJ45 10G Keystone
Giganet CAT6A Shielded RJ45 10G Keystone
Features
Giganet GN-C6-FP-01 1Port Faceplate
Giganet GN-C6-FP-01 1Port Faceplate
specifications
Category 6 TIA/EIA 568-B.2-1, EN50173-1 & ISO/IEC 11801.2
• 25mm W X 21mm D X 38.5mm H
• Ideal for Ackerman & Dado Floor Boxes
• Industry Standard LJ6C Aperture
• Unique Shuttered Module to prevent dust contamination
• Compact Low profile Design with LSA Style Termination Blocks
Wire tracker/Tracer
Wire tracker/Tracer
Features
RJ45 cat 6 Jack Connectors 100Pcs
RJ45 cat 6 Jack Connectors 100Pcs
Features
Apkr Faceplates Double
Apkr Faceplates Double
Features
Apkr Faceplates Single
Apkr Faceplates Single
Features
Apkr cat6 Modules
Apkr cat6 Modules
Shop now at www.informedstore.co.ke or call +254 793 000 111
Generic APKR Patch panel 24port
Generic APKR Patch panel 24port
Key Features
Cable tester 4 in 1 Generic
Cable tester 4 in 1 Generic
Features:
Crimping Tool
Crimping Tool
Cisco 10GBASE-SR SFP Module SFP-10G-SR
Cisco 10GBASE-SR SFP Module SFP-10G-SR
Cisco SFP-10G-LR, 10GBASE-LR SFP+ Module
Cisco SFP-10G-LR, 10GBASE-LR SFP+ Module
Features
● Industry’s smallest 10G form factor for greatest density per chassis
● Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing)
● Supports “pay-as-you-populate” model for investment protection and ease of technology migration
● Digital optical monitoring capability for strong diagnostic capabilities
● Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link
● Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco
- This device also offers protection against- high voltage, low voltage, spike/surge, lightning
- Socket Type: BS1363 (90degree) Outlet Module
- Socket Quantity: 10 way
- Input Cable : 2 Meter
- Master Switch : has an on or off master switch.
- Surge Protection : No
- Rating Current : 13 Amp
- In addition it has a Rating voltage : 250VAC 50/60Hz
- CE Approved : Yes
- Max. Power : 3250W
- Length : 680 mm
- Height : 44.4 mm (1U)
- Depth : 44.4 mm
- Colour : Black
- RoHS : Yes
- Reversible ratchet handle
- 10 pc bit group
- 5 pcs socket
- Anti static anti short wrist band
- 6 pcs precision screw driver
- 4-1/2″ side cutter
- 5″ long nose piller
- Flash light
- Rj 45 modular crimping tool
- 8 pcs modular plug
- Protection cap
- Cable tie
- Lan cable tester
- Rack mount 19″ form factor with 1U height
- Suitable for CAT6 UTP Ethernet cables using Gigabit
- Quality pressed Steel construction with individual port labelling
- Gold over Nickel plated jack contacts.
- Phosphor Bronze & Nickel plated IDC terminals.
- IDC terminals accept 22 to 26AWG solid and stranded wires
- Horizontal Punch Down
-
- Standards
- IEEE 802.3 (10Base-T Ethernet)
- IEEE 802.3u (100Base-TX Fast Ethernet)
- IEEE 802.3ab (1000Base-T Gigabit Ethernet)
- Anti-Static/Anti Shock Wrist Band
- UTP/STP Strips & Cuts Tool
- 4 1/2″ Side Cutter
- Long Nose Pliers
- RJ45 Modular Crimping Tool
- 8P8C Modular Plug
- Protection Cap
- LAN Cable tester
- See through Blow Mold Case
- Provides enhanced EMI protection & improved Alien Cross Talk and return loss
- Pre-terminated with quality shielded plug and anti-snag strain relief boots
- Stranded cable provides pair symmetry and robust strain relief
- 100% Factory tested to ensure optimal performance and compliance
- Exceeds 10G channel and component requirements
- Suitable for high-density data center blade equipment.
- 10G channel performance when installed as a complete Giganet CAT6A system.
- Supported Cables : UTP / STP RJ45 / RJ11 / Metal Cable
- Supported Test : Shielded and Unshielded RJ45 (8P8C)
- Tone Frequency : 200Hz
- Max. Distance of Transmission : Up to 2 Kilometers
- Max. Working Current : Less than 10mA
- Volume Regulate Function : Audio Volume Level Control
- Tone Mode : 2 Tones, Adjustable
- Max. Signal Voltage : 8Vp-p
- LED Lights Display : Wiremap, Tone, Tracing
- Voltage Protection : AC 60V / DC 42V
- 100 PCS RJ45 plugs for unshielded twisted pair solid or stranded cable, supports 24 to 26 AWG round or flat network cable.
- Gold-plated contacts provide reliable performance for a Gigabit Ethernet-rated network.
- ROHS compliant, and the color is Transparent, allow indicator light penetration better.
- Easy for carrying, Gold plated connectors resist corrosion, improve the signal performance.
- CableCreation provides in 24-month supreme warranty service, if you have any questions, please contact us as soon as possible, we will answer your questions 24 hours a day.
- Tips: This Connector is not RJ45 pass through connector, If you need RJ45 pass through connectors, please purchase through this ASIN: B08HLJJT9D.
- Toolless adapter connection.Female to female connectors. Just plug one cable into the front and one into the back.
- All standard sizes. Screws included.
- Keystone jacks are removable unlike competitor plates for future upgrades.
- It is compatible with Cat6, Cat5e network ethernet cable.
- Toolless adapter connection.Female to female connectors. Just plug one cable into the front and one into the back.
- All standard sizes. Screws included.
- Keystone jacks are removable unlike competitor plates for future upgrades.
- It is compatible with Cat6, Cat5e network ethernet cable.
- Flexible Installation – Install from either front or rear of the faceplate
- Quick Identification – Colored Icons provided for port identification
- Easy Termination – Punch down with standard 110 termination tools
- Cat6 Cat5e Cat5 Compatible.
- Keystone Wall Plate / Face Plate / Patch Panel Compatible.
- T568A and T568B color coding.
- Number of ports – loaded: 24
- Type of connector: RJ45 8(8)
- Shielded: no
- Category: 6
- Connection type: LSA
- Number of rack units (ru): 1
- Can test RJ11/RJ45/USB/BNC cables
- Detachable module for testing two remote points
- Terminator 25 Ohm / 50 Ohm indications
- Straight or crossover indication
- Powered by 9V alkaline battery
- Palm size with carrying bag
- Automatic deactivation
- Application: Cutting network cable
- Brand Name: OUBAO
- Material: Stainless Steel
- Durable Crimping/Cutting/Stripping 3 in 1 Tool
- Good for RJ-45- RJ-11 RJ-12 connectors.
- Suitable for Cat5 and Cat5e cable
- Heavy-Duty
- Easy to use
- Portalbe style with perfect shape
- Rugged Carbon Hardened Steel Construction
- Supports a link length of 26 meters on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF).
- Using 2000 MHz*km MMF (OM3), up to 300-meter link lengths are possible.
- Using 4700 MHz*km MMF (OM4), up to 400-meter link lengths are possible.
MikroTik 24 Port Gigabit Ethernet Switch (CRS328-24P-4S+RM)
MikroTik 24 Port Gigabit Ethernet Switch (CRS328-24P-4S+RM)
CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included).
10 way PDU UK plug
Metallic 10 ways Power Distriution Unit PDU
S-TEK Networking Toolkit 50 Pieces
S-TEK Networking Toolkit 50 Pieces
nylon cable tie 3.5x200mm
nylon cable tie 3.5x200mm
Features
Dimensions:
3.50 mm (W) x 200.00 mm (L)
Colour:
Black or white
Brady Material Type:
Nylon
Application(s):
Inspection tagging
Giganet 2U cable Manager closed
Giganet 2U cable Manager closed
Features
Metal or Plastic variant
Helping to alleviate strain on cable
Improved appearance to cabinet installations
Excellent patch lead management
Finished in black to match 19″ equipment such as patch panels
Shop now at www.informedstore.co.ke or call +254 793 000 111
giganet patch panel 48 ports
giganet patch panel 48 ports
These fully compliant panels are simple to install and provide excellent performance at a great price.
Numerical identification on all outlets
Labeling fields with writeable surface
Six port blocks for ease of management
Rear Wire manager guide included
IDC punch down termination
Cage nuts included *Color: Matt Black.
giganet patch panel 24 ports
giganet patch panel 24 ports
Specifications
Network Tool Kit 18pcs
Network Tool Kit 18pcs
Networking tool kit with 18 different tools ideal for basic networking tasks including;
Giganet CAT6A Shielded RJ45 10G Keystone
Giganet CAT6A Shielded RJ45 10G Keystone
Features
Giganet GN-C6-FP-01 1Port Faceplate
Giganet GN-C6-FP-01 1Port Faceplate
specifications
Category 6 TIA/EIA 568-B.2-1, EN50173-1 & ISO/IEC 11801.2
• 25mm W X 21mm D X 38.5mm H
• Ideal for Ackerman & Dado Floor Boxes
• Industry Standard LJ6C Aperture
• Unique Shuttered Module to prevent dust contamination
• Compact Low profile Design with LSA Style Termination Blocks
Wire tracker/Tracer
Wire tracker/Tracer
Features
RJ45 cat 6 Jack Connectors 100Pcs
RJ45 cat 6 Jack Connectors 100Pcs
Features
Apkr Faceplates Double
Apkr Faceplates Double
Features
Apkr Faceplates Single
Apkr Faceplates Single
Features
Apkr cat6 Modules
Apkr cat6 Modules
Shop now at www.informedstore.co.ke or call +254 793 000 111
Generic APKR Patch panel 24port
Generic APKR Patch panel 24port
Key Features
Cable tester 4 in 1 Generic
Cable tester 4 in 1 Generic
Features:
Crimping Tool
Crimping Tool
Cisco 10GBASE-SR SFP Module SFP-10G-SR
Cisco 10GBASE-SR SFP Module SFP-10G-SR
Cisco SFP-10G-LR, 10GBASE-LR SFP+ Module
Cisco SFP-10G-LR, 10GBASE-LR SFP+ Module
Features
● Industry’s smallest 10G form factor for greatest density per chassis
● Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing)
● Supports “pay-as-you-populate” model for investment protection and ease of technology migration
● Digital optical monitoring capability for strong diagnostic capabilities
● Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link
● Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco
