- Compatible with C-TEC’s entire range of 800 Series field devices.
- Housed in an attractive surface mount plastic enclosure measuring just 214mm x 178mm
- Two call levels – standard (constant tone) and emergency (intermittent tone).
- Optional mute and call accept/reset buttons.
- ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used).
- Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call.
- Innovative slide-in labelling system.
- Zones can be wired in 4 or 6-core (7/02) stranded security cable.
- Additional master controllers and expansion units are available for use as repeaters on larger sites.
- Optional boxed PSUs c/w with space for a 12V VRLA battery are available for sites where a standby battery facility is required.
- Dual red LEDs and triangular diffuser make it highly visible from a distance.
- Can also be used as an ‘area indicator’ at corridor junctions, staff workstations, etc.
- Finished in tough, durable ABS plastic.
- Also available as part of the NC951 Accessible Toilet Alarm kit.
- Stainless steel version also available.
- Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device.
- Indicates Standard calls via a constant tone/constant red light and Emergency calls via a pulsing tone/pulsing red light.
- Mounts on a standard UK 25mm single gang flush or surface back box.
- A short 1.8m tail call lead for use with C-TEC’s Quantec and 800 Series Call Systems.
- Allows users to remotely generate Standard calls from armchairs, beds, etc.
- Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug.
- Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.
- Activating the pear push or removing the tail call lead from a call point’s remote socket will generate a Standard call.
- An attractively designed button-operated call/reset point capable of generating Standard calls on an 800 Series Call System.
- Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
- Red reassurance LED confirms a call has been made.
- Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
- Mounts on a standard UK 25mm single gang flush or surface back box.
- Easy to press big red call button
- Green button to reset
- Call reassurance LED
- Comes with lanyard clip and plastic wall-mounted bracket for storage
- Can be used to generate a standard call on an 800 Series Conventional Call System.
- Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be canceled.
- Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
- Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
- Surface mountable.
- Base fits 16mm conduit and BESA centres.
- 2 key nurse call button with pull cord: Call: Press big red call button or Pull the cord; Cancel: Press the small red cancel button
- 100% Waterproof
- With 2 meters pull cord & triangle pull ring for easy pull
- White durable ABS enclosure
- Built-in antenna
- Installation : Wall-mounted / Stick on any surface
- 2 key nurse call button with patient handset: Call: Press the big red call button on the panel or big red call button on the patient handset; Cancel: Press small red cancel button on the panel or small red cancel button on the patient handset
- 100% Waterproof
- With 1-meter spiral telephone cable & handset for easy press
- White durable ABS enclosure
- Built-in antenna
- Wall-mounted / Stick on any surface
- 2 key nurse call button: Call & Cancel
- 100% Waterproof
- Different silicon printing for different usage:
EC-200CX: Red silicon for patients to call nurses
EC-200NX: Green silicon for nurses to inform Nurse Center they have attended
EC-200AX: Yellow silicon for nurses to call Nurse Center for help
EC-200CB: Blue silicon for Code Blue (emergency calling) - White durable ABS enclosure
- Built-in antenna
- Installation: Wall-mounted / Stick on any surface
- Display 3 groups of 3-digit numbers from 000 to 999 with the “AbCdEF” letter
- Display current time when it is on standby
- Works with 400pcs of call buttons (Max)
- Show last 32 calls – rolling until the call is canceled
- Can cancel callings via remote controls, 32pcs remote controls in max
- Indicate the service type by dots:1 indicator dot: call; 2 indicator dots: order; 3 indicator dots: bill
- Adjustable ringtone and volume
- Desktop-type / Wall-mounted type receiver
- Boosting all signals from the call button to the receiver
- Multi Signal repeaters can work together in one place, no interfere
- Extends transmission distance (open area: up to 2km)
- Easy installation – plug & play
KSh65,000.00 Excl. VAT
Nursecall 20 Zone Master Call Controller c/w 300mA PSU (Surface Version)
SKU: N/ANursecall 10 Zone Master Call Controller
KSh35,000.00 Excl. VAT
N/HARK/1 HARK Disabled Toilet alarm Kit
SKU: 209N/HARK/1 HARK Disabled Toilet alarm Kit
includes a pull cord unit, reset point and power supply / indicator.
• Sounder within the reset unit to give audible reassurance that assistance is on the way
• Braille text on the reset unit
• Only 3 points to install on a standard system
• Can be simply linked to other systems
• Assists in ensuring compliance with the DDA BS8300 & other care standards
• Simple to expand
• Multi-way remote indicator units available
• Twin pull cord rings supplied
• Disabled Persons sticker supplied
KSh9,500.00 Excl. VAT
C-tec Overdoor Light with Sounder NC806CS
SKU: 158C-tec Overdoor Light with Sounder NC806CS
KSh5,000.00 Excl. VAT
NC805C/6 Pear Push Extension Call Lead – 2m
SKU: 157NC805C/6 Pear Push Extension Call Lead – 2m
KSh5,000.00 Excl. VAT
N/C/802DB Standard Call Point With Button Reset And Remote Socket
SKU: 156N/C/802DB Standard Call Point With Button Reset And Remote Socket
KSh3,500.00 Excl. VAT
Wireless Patient Handset Call Cord With Bed Head Call & Cancel Function
SKU: 248Wireless Patient Handset Call Cord With Bed Head Call & Cancel Function
KSh3,500.00 Excl. VAT
Wireless Call Button With Emergency Pull Cord
SKU: 247Wireless Call Button With Emergency Pull Cord
Placed on the wall in patients’ room or Toilet for emergency calls. It is easy to be caught in emergency situations.
| Working frequency | 433MHZ |
| Power | 12 V 23 A Battery |
| Battery life | Appro. calling 40,000 times |
| Package | 2 pcs per box |
| Transmission distance | 300 m (open area) |
| Size | 85 x 85 x 15mm (Panel) |
KSh5,000.00 Excl. VAT
Nursecall Ceiling Pull Unit NC807C
SKU: N/ANursecall Ceiling Pull Unit
KSh4,500.00 Nurse Call Button with Pull Cord EC-220PT
SKU: N/ANurse Call Button
KSh3,500.00 Nurse Call Button with Patient Handset EC-220PH
SKU: N/AVisit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
KSh2,500.00 Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
SKU: N/AVisit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
KSh25,000.00 Excl. VAT
Nursecall Wireless Receiver CT-R330
SKU: N/ANursecall Wireless Receiver CT-R330
KSh8,500.00 Excl. VAT
Nursecall Signal Repeater EC-900S
SKU: N/ANursecall Signal Repeater
- Compatible with C-TEC’s entire range of 800 Series field devices.
- Housed in an attractive surface mount plastic enclosure measuring just 214mm x 178mm
- Two call levels – standard (constant tone) and emergency (intermittent tone).
- Optional mute and call accept/reset buttons.
- ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used).
- Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call.
- Innovative slide-in labelling system.
- Zones can be wired in 4 or 6-core (7/02) stranded security cable.
- Additional master controllers and expansion units are available for use as repeaters on larger sites.
- Optional boxed PSUs c/w with space for a 12V VRLA battery are available for sites where a standby battery facility is required.
- Dual red LEDs and triangular diffuser make it highly visible from a distance.
- Can also be used as an ‘area indicator’ at corridor junctions, staff workstations, etc.
- Finished in tough, durable ABS plastic.
- Also available as part of the NC951 Accessible Toilet Alarm kit.
- Stainless steel version also available.
- Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device.
- Indicates Standard calls via a constant tone/constant red light and Emergency calls via a pulsing tone/pulsing red light.
- Mounts on a standard UK 25mm single gang flush or surface back box.
- A short 1.8m tail call lead for use with C-TEC’s Quantec and 800 Series Call Systems.
- Allows users to remotely generate Standard calls from armchairs, beds, etc.
- Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug.
- Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.
- Activating the pear push or removing the tail call lead from a call point’s remote socket will generate a Standard call.
- An attractively designed button-operated call/reset point capable of generating Standard calls on an 800 Series Call System.
- Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
- Red reassurance LED confirms a call has been made.
- Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
- Mounts on a standard UK 25mm single gang flush or surface back box.
- Easy to press big red call button
- Green button to reset
- Call reassurance LED
- Comes with lanyard clip and plastic wall-mounted bracket for storage
- Can be used to generate a standard call on an 800 Series Conventional Call System.
- Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be canceled.
- Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
- Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
- Surface mountable.
- Base fits 16mm conduit and BESA centres.
- 2 key nurse call button with pull cord: Call: Press big red call button or Pull the cord; Cancel: Press the small red cancel button
- 100% Waterproof
- With 2 meters pull cord & triangle pull ring for easy pull
- White durable ABS enclosure
- Built-in antenna
- Installation : Wall-mounted / Stick on any surface
- 2 key nurse call button with patient handset: Call: Press the big red call button on the panel or big red call button on the patient handset; Cancel: Press small red cancel button on the panel or small red cancel button on the patient handset
- 100% Waterproof
- With 1-meter spiral telephone cable & handset for easy press
- White durable ABS enclosure
- Built-in antenna
- Wall-mounted / Stick on any surface
- 2 key nurse call button: Call & Cancel
- 100% Waterproof
- Different silicon printing for different usage:
EC-200CX: Red silicon for patients to call nurses
EC-200NX: Green silicon for nurses to inform Nurse Center they have attended
EC-200AX: Yellow silicon for nurses to call Nurse Center for help
EC-200CB: Blue silicon for Code Blue (emergency calling) - White durable ABS enclosure
- Built-in antenna
- Installation: Wall-mounted / Stick on any surface
- Display 3 groups of 3-digit numbers from 000 to 999 with the “AbCdEF” letter
- Display current time when it is on standby
- Works with 400pcs of call buttons (Max)
- Show last 32 calls – rolling until the call is canceled
- Can cancel callings via remote controls, 32pcs remote controls in max
- Indicate the service type by dots:1 indicator dot: call; 2 indicator dots: order; 3 indicator dots: bill
- Adjustable ringtone and volume
- Desktop-type / Wall-mounted type receiver
- Boosting all signals from the call button to the receiver
- Multi Signal repeaters can work together in one place, no interfere
- Extends transmission distance (open area: up to 2km)
- Easy installation – plug & play
Nursecall 20 Zone Master Call Controller c/w 300mA PSU (Surface Version)
Nursecall 10 Zone Master Call Controller
N/HARK/1 HARK Disabled Toilet alarm Kit
N/HARK/1 HARK Disabled Toilet alarm Kit
includes a pull cord unit, reset point and power supply / indicator.
• Sounder within the reset unit to give audible reassurance that assistance is on the way
• Braille text on the reset unit
• Only 3 points to install on a standard system
• Can be simply linked to other systems
• Assists in ensuring compliance with the DDA BS8300 & other care standards
• Simple to expand
• Multi-way remote indicator units available
• Twin pull cord rings supplied
• Disabled Persons sticker supplied
C-tec Overdoor Light with Sounder NC806CS
C-tec Overdoor Light with Sounder NC806CS
NC805C/6 Pear Push Extension Call Lead – 2m
NC805C/6 Pear Push Extension Call Lead – 2m
N/C/802DB Standard Call Point With Button Reset And Remote Socket
N/C/802DB Standard Call Point With Button Reset And Remote Socket
Wireless Patient Handset Call Cord With Bed Head Call & Cancel Function
Wireless Patient Handset Call Cord With Bed Head Call & Cancel Function
Wireless Call Button With Emergency Pull Cord
Wireless Call Button With Emergency Pull Cord
Placed on the wall in patients’ room or Toilet for emergency calls. It is easy to be caught in emergency situations.
| Working frequency | 433MHZ |
| Power | 12 V 23 A Battery |
| Battery life | Appro. calling 40,000 times |
| Package | 2 pcs per box |
| Transmission distance | 300 m (open area) |
| Size | 85 x 85 x 15mm (Panel) |
Nursecall Ceiling Pull Unit NC807C
Nursecall Ceiling Pull Unit
Nurse Call Button with Pull Cord EC-220PT
Nurse Call Button
Nurse Call Button with Patient Handset EC-220PH
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
Nursecall Wireless Receiver CT-R330
Nursecall Wireless Receiver CT-R330
Nursecall Signal Repeater EC-900S
Nursecall Signal Repeater
- Compatible with C-TEC’s entire range of 800 Series field devices.
- Housed in an attractive surface mount plastic enclosure measuring just 214mm x 178mm
- Two call levels – standard (constant tone) and emergency (intermittent tone).
- Optional mute and call accept/reset buttons.
- ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used).
- Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call.
- Innovative slide-in labelling system.
- Zones can be wired in 4 or 6-core (7/02) stranded security cable.
- Additional master controllers and expansion units are available for use as repeaters on larger sites.
- Optional boxed PSUs c/w with space for a 12V VRLA battery are available for sites where a standby battery facility is required.
- Dual red LEDs and triangular diffuser make it highly visible from a distance.
- Can also be used as an ‘area indicator’ at corridor junctions, staff workstations, etc.
- Finished in tough, durable ABS plastic.
- Also available as part of the NC951 Accessible Toilet Alarm kit.
- Stainless steel version also available.
- Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device.
- Indicates Standard calls via a constant tone/constant red light and Emergency calls via a pulsing tone/pulsing red light.
- Mounts on a standard UK 25mm single gang flush or surface back box.
- A short 1.8m tail call lead for use with C-TEC’s Quantec and 800 Series Call Systems.
- Allows users to remotely generate Standard calls from armchairs, beds, etc.
- Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug.
- Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.
- Activating the pear push or removing the tail call lead from a call point’s remote socket will generate a Standard call.
- An attractively designed button-operated call/reset point capable of generating Standard calls on an 800 Series Call System.
- Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
- Red reassurance LED confirms a call has been made.
- Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
- Mounts on a standard UK 25mm single gang flush or surface back box.
- Easy to press big red call button
- Green button to reset
- Call reassurance LED
- Comes with lanyard clip and plastic wall-mounted bracket for storage
- Can be used to generate a standard call on an 800 Series Conventional Call System.
- Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be canceled.
- Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
- Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
- Surface mountable.
- Base fits 16mm conduit and BESA centres.
- 2 key nurse call button with pull cord: Call: Press big red call button or Pull the cord; Cancel: Press the small red cancel button
- 100% Waterproof
- With 2 meters pull cord & triangle pull ring for easy pull
- White durable ABS enclosure
- Built-in antenna
- Installation : Wall-mounted / Stick on any surface
- 2 key nurse call button with patient handset: Call: Press the big red call button on the panel or big red call button on the patient handset; Cancel: Press small red cancel button on the panel or small red cancel button on the patient handset
- 100% Waterproof
- With 1-meter spiral telephone cable & handset for easy press
- White durable ABS enclosure
- Built-in antenna
- Wall-mounted / Stick on any surface
- 2 key nurse call button: Call & Cancel
- 100% Waterproof
- Different silicon printing for different usage:
EC-200CX: Red silicon for patients to call nurses
EC-200NX: Green silicon for nurses to inform Nurse Center they have attended
EC-200AX: Yellow silicon for nurses to call Nurse Center for help
EC-200CB: Blue silicon for Code Blue (emergency calling) - White durable ABS enclosure
- Built-in antenna
- Installation: Wall-mounted / Stick on any surface
- Display 3 groups of 3-digit numbers from 000 to 999 with the “AbCdEF” letter
- Display current time when it is on standby
- Works with 400pcs of call buttons (Max)
- Show last 32 calls – rolling until the call is canceled
- Can cancel callings via remote controls, 32pcs remote controls in max
- Indicate the service type by dots:1 indicator dot: call; 2 indicator dots: order; 3 indicator dots: bill
- Adjustable ringtone and volume
- Desktop-type / Wall-mounted type receiver
- Boosting all signals from the call button to the receiver
- Multi Signal repeaters can work together in one place, no interfere
- Extends transmission distance (open area: up to 2km)
- Easy installation – plug & play
Nursecall 20 Zone Master Call Controller c/w 300mA PSU (Surface Version)
Nursecall 10 Zone Master Call Controller
N/HARK/1 HARK Disabled Toilet alarm Kit
N/HARK/1 HARK Disabled Toilet alarm Kit
includes a pull cord unit, reset point and power supply / indicator.
• Sounder within the reset unit to give audible reassurance that assistance is on the way
• Braille text on the reset unit
• Only 3 points to install on a standard system
• Can be simply linked to other systems
• Assists in ensuring compliance with the DDA BS8300 & other care standards
• Simple to expand
• Multi-way remote indicator units available
• Twin pull cord rings supplied
• Disabled Persons sticker supplied
C-tec Overdoor Light with Sounder NC806CS
C-tec Overdoor Light with Sounder NC806CS
NC805C/6 Pear Push Extension Call Lead – 2m
NC805C/6 Pear Push Extension Call Lead – 2m
N/C/802DB Standard Call Point With Button Reset And Remote Socket
N/C/802DB Standard Call Point With Button Reset And Remote Socket
Wireless Patient Handset Call Cord With Bed Head Call & Cancel Function
Wireless Patient Handset Call Cord With Bed Head Call & Cancel Function
Wireless Call Button With Emergency Pull Cord
Wireless Call Button With Emergency Pull Cord
Placed on the wall in patients’ room or Toilet for emergency calls. It is easy to be caught in emergency situations.
| Working frequency | 433MHZ |
| Power | 12 V 23 A Battery |
| Battery life | Appro. calling 40,000 times |
| Package | 2 pcs per box |
| Transmission distance | 300 m (open area) |
| Size | 85 x 85 x 15mm (Panel) |
Nursecall Ceiling Pull Unit NC807C
Nursecall Ceiling Pull Unit
Nurse Call Button with Pull Cord EC-220PT
Nurse Call Button
Nurse Call Button with Patient Handset EC-220PH
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
Nursecall Wireless Receiver CT-R330
Nursecall Wireless Receiver CT-R330
Nursecall Signal Repeater EC-900S
Nursecall Signal Repeater
- Compatible with C-TEC’s entire range of 800 Series field devices.
- Housed in an attractive surface mount plastic enclosure measuring just 214mm x 178mm
- Two call levels – standard (constant tone) and emergency (intermittent tone).
- Optional mute and call accept/reset buttons.
- ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used).
- Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call.
- Innovative slide-in labelling system.
- Zones can be wired in 4 or 6-core (7/02) stranded security cable.
- Additional master controllers and expansion units are available for use as repeaters on larger sites.
- Optional boxed PSUs c/w with space for a 12V VRLA battery are available for sites where a standby battery facility is required.
- Dual red LEDs and triangular diffuser make it highly visible from a distance.
- Can also be used as an ‘area indicator’ at corridor junctions, staff workstations, etc.
- Finished in tough, durable ABS plastic.
- Also available as part of the NC951 Accessible Toilet Alarm kit.
- Stainless steel version also available.
- Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device.
- Indicates Standard calls via a constant tone/constant red light and Emergency calls via a pulsing tone/pulsing red light.
- Mounts on a standard UK 25mm single gang flush or surface back box.
- A short 1.8m tail call lead for use with C-TEC’s Quantec and 800 Series Call Systems.
- Allows users to remotely generate Standard calls from armchairs, beds, etc.
- Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug.
- Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.
- Activating the pear push or removing the tail call lead from a call point’s remote socket will generate a Standard call.
- An attractively designed button-operated call/reset point capable of generating Standard calls on an 800 Series Call System.
- Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
- Red reassurance LED confirms a call has been made.
- Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
- Mounts on a standard UK 25mm single gang flush or surface back box.
- Easy to press big red call button
- Green button to reset
- Call reassurance LED
- Comes with lanyard clip and plastic wall-mounted bracket for storage
- Can be used to generate a standard call on an 800 Series Conventional Call System.
- Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be canceled.
- Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
- Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
- Surface mountable.
- Base fits 16mm conduit and BESA centres.
- 2 key nurse call button with pull cord: Call: Press big red call button or Pull the cord; Cancel: Press the small red cancel button
- 100% Waterproof
- With 2 meters pull cord & triangle pull ring for easy pull
- White durable ABS enclosure
- Built-in antenna
- Installation : Wall-mounted / Stick on any surface
- 2 key nurse call button with patient handset: Call: Press the big red call button on the panel or big red call button on the patient handset; Cancel: Press small red cancel button on the panel or small red cancel button on the patient handset
- 100% Waterproof
- With 1-meter spiral telephone cable & handset for easy press
- White durable ABS enclosure
- Built-in antenna
- Wall-mounted / Stick on any surface
- 2 key nurse call button: Call & Cancel
- 100% Waterproof
- Different silicon printing for different usage:
EC-200CX: Red silicon for patients to call nurses
EC-200NX: Green silicon for nurses to inform Nurse Center they have attended
EC-200AX: Yellow silicon for nurses to call Nurse Center for help
EC-200CB: Blue silicon for Code Blue (emergency calling) - White durable ABS enclosure
- Built-in antenna
- Installation: Wall-mounted / Stick on any surface
- Display 3 groups of 3-digit numbers from 000 to 999 with the “AbCdEF” letter
- Display current time when it is on standby
- Works with 400pcs of call buttons (Max)
- Show last 32 calls – rolling until the call is canceled
- Can cancel callings via remote controls, 32pcs remote controls in max
- Indicate the service type by dots:1 indicator dot: call; 2 indicator dots: order; 3 indicator dots: bill
- Adjustable ringtone and volume
- Desktop-type / Wall-mounted type receiver
- Boosting all signals from the call button to the receiver
- Multi Signal repeaters can work together in one place, no interfere
- Extends transmission distance (open area: up to 2km)
- Easy installation – plug & play
Nursecall 20 Zone Master Call Controller c/w 300mA PSU (Surface Version)
Nursecall 10 Zone Master Call Controller
N/HARK/1 HARK Disabled Toilet alarm Kit
N/HARK/1 HARK Disabled Toilet alarm Kit
includes a pull cord unit, reset point and power supply / indicator.
• Sounder within the reset unit to give audible reassurance that assistance is on the way
• Braille text on the reset unit
• Only 3 points to install on a standard system
• Can be simply linked to other systems
• Assists in ensuring compliance with the DDA BS8300 & other care standards
• Simple to expand
• Multi-way remote indicator units available
• Twin pull cord rings supplied
• Disabled Persons sticker supplied
C-tec Overdoor Light with Sounder NC806CS
C-tec Overdoor Light with Sounder NC806CS
NC805C/6 Pear Push Extension Call Lead – 2m
NC805C/6 Pear Push Extension Call Lead – 2m
N/C/802DB Standard Call Point With Button Reset And Remote Socket
N/C/802DB Standard Call Point With Button Reset And Remote Socket
Wireless Patient Handset Call Cord With Bed Head Call & Cancel Function
Wireless Patient Handset Call Cord With Bed Head Call & Cancel Function
Wireless Call Button With Emergency Pull Cord
Wireless Call Button With Emergency Pull Cord
Placed on the wall in patients’ room or Toilet for emergency calls. It is easy to be caught in emergency situations.
| Working frequency | 433MHZ |
| Power | 12 V 23 A Battery |
| Battery life | Appro. calling 40,000 times |
| Package | 2 pcs per box |
| Transmission distance | 300 m (open area) |
| Size | 85 x 85 x 15mm (Panel) |
Nursecall Ceiling Pull Unit NC807C
Nursecall Ceiling Pull Unit
Nurse Call Button with Pull Cord EC-220PT
Nurse Call Button
Nurse Call Button with Patient Handset EC-220PH
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
Nursecall Wireless Receiver CT-R330
Nursecall Wireless Receiver CT-R330
