2 Way Breeching Inlet Valves
Availability:In Stock!
2 Way Breeching Inlet Valves
- Certificate: BSI / LPCB Approved
- Standard: BS 5041-3
- Connection: Flanged to EN 1092-2
- Temperature: 0°C to 38°C
- Test pressure: 20 bar
- Surface: Red powder coating (RAL 3000)
KSh18,000.00 Excl. VAT
CompareDescription
2 Way Breeching Inlet Valves
Inlet breeching valve is installed at ground level to provide a connection to the water supply. The system is usually dry and charged by the fire brigade in an emergency. DRV008 has 2 inlets which are 2 ½” male instantaneous connections to BS336 and fitted with non-return valves, a 1” drain valve, caps and chains. 2 way inlet breeching valves can be installed in the vertical or horizontal position
- Certificate: BSI / LPCB Approved
- Standard: BS 5041-3
- Connection: Flanged to EN 1092-2
- Temperature: 0°C to 38°C
- Test pressure: 20 bar
- Surface: Red powder coating (RAL 3000)
Product Specification
| Material | Spheroidal Graphite Iron |
| Test Pressure | 20 bar |
| Chain Material | Stainless |
| Two Way Outlet | Flanged 4 inch |
buy at discounted prices at or shop in Nairobi, Kenya along Kamae road off Luthuli avenue
smortergiremal –
Normally I do not read article on blogs, but I would like to say that this write-up very compelled me to check out and do it! Your writing taste has been surprised me. Thank you, quite nice post.
tlovertonet –
I don’t even understand how I ended up here, however I assumed this post used to be good. I don’t understand who you might be but definitely you’re going to a well-known blogger when you aren’t already 😉 Cheers!