KSh6,000.00 Excl. VAT
HikFire LoRa Wireless Smoke Detector NP-FY200
SKU: N/AHikFire LoRa Wireless Smoke Detector NP-FY200
NP-FY200 Photoelectric Smoke Alarm can detect smoke in
the early stage of a fire hazard, and provide warnings by
sending out audible and visual alarm signals. The alarm is
designed for residential and institutional applications
KSh20,000.00 Excl. VAT
Hikfire Fire Alarm Loop Board HK8308/8324
SKU: N/AHikfire Fire Alarm Loop Board HK8308/8324
The HikFire HK8308 / HK8324 Loop Board is an electronic expansion and control component designed for compatible HikFire addressable fire alarm control panels. It provides the communication interface between the fire alarm control panel and connected addressable field devices.
The loop board enables the control panel to communicate with compatible smoke detectors, heat detectors, manual call points, sounders and addressable interface modules. It supports reliable device monitoring, alarm signal transmission and system communication.
KSh4,000.00 Excl. VAT
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
SKU: N/AHikFire Addressable Isolator Module HF-AIM1 (O-STD)
The HikFire HF-AIM1 (O-STD) Addressable Isolator Module provides short-circuit protection for compatible addressable fire alarm systems. It helps prevent a short circuit in one section of the loop from disrupting communication across the entire system, improving reliability and continuity of fire detection.
KSh4,000.00 Excl. VAT
HikFire Addressable Manual Call Point HF-AMP1 (O-STD)
SKU: N/AHikFire Addressable Manual Call Point HF-AMP1 (O-STD)
The HikFire HF-AMP1 (O-STD) Addressable Manual Call Point provides a reliable means of manually raising a fire alarm in an emergency. Designed for compatible HikFire addressable fire alarm systems, it enables the control panel to identify the activated device location. Its manual reset mechanism supports convenient resetting after activation.
KSh4,000.00 Excl. VAT
HikFire Addressable Sounder Strobe HF-ASS1 (O-STD)
SKU: N/AHikFire Addressable Sounder Strobe HF-ASS1 (O-STD)
The HikFire HF-ASS1 (O-STD) Addressable Sounder Strobe combines audible and visual alerts in one device for effective fire emergency notification. Designed for compatible HikFire addressable fire alarm systems, it communicates through the addressable bus and provides sound and flashing light when activated.
KSh4,000.00 Excl. VAT
HikFire Addressable Heat Detector HF-AH1 (O-STD)
SKU: N/AHikFire Addressable Heat Detector HF-AH1 (O-STD)
The HikFire HF-AH1 (O-STD) Addressable Heat Detector provides reliable heat detection for fire alarm installations in areas where smoke detectors may be unsuitable. It connects to a compatible addressable fire alarm system, enabling individual device identification and alarm monitoring.
KSh14,000.00 Excl. VAT
HikFire HK-BMQ-8250 Encoder
SKU: N/AHikFire HK-BMQ-8250 Encoder
The HikFire HK-BMQ-8250 Electronic Encoder is a professional address programming and testing tool designed for HikFire addressable fire alarm systems. It allows installers and technicians to read and write device addresses, register devices, check duplicate addresses, detect resistance and perform device programming and maintenance.
KSh205,000.00 HikFire Addressable 4 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/4
SKU: N/AHikFire Addressable 4 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/4
The HikFire JB-LBZ2-HK8308/4 is a 4-loop addressable fire alarm control and linkage panel designed for centralized fire alarm monitoring, indication and system control. With up to 250 addressable points per loop, the 4-loop configuration supports up to 1,000 addressable devices. The HK8308 series is available in configurations up to 8 loops.
KSh148,000.00 HikFire Addressable 2 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/2
SKU: N/AHikFire Addressable 2 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/2
The HikFire JB-LBZ2-HK8308/2 is a 2-loop addressable fire alarm control and linkage panel designed for centralized monitoring, alarm indication and fire-system control. It supports 250 addressable devices per loop, giving a standard capacity of up to 500 addressable points, with the HK8308 family supporting configurations up to 8 loops.
KSh132,000.00 HikFire Addressable 1 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/1
SKU: N/AHikFire Addressable 1 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/1
HikFire JB-LBZ2-HK8308/1 Addressable Fire Alarm Control Panel is a reliable 1-loop fire alarm control and linkage panel designed for intelligent fire detection and emergency control. Supporting up to 250 addressable devices on its loop and expandable to 8 loops, it provides centralized monitoring of detectors, manual call points, sounders and interface modules.
KSh22,000.00 Excl. VAT
HikFire Addressable Fire Display Panel – HK-XS-8016
SKU: N/AHikFire Addressable Fire Display Panel – HK-XS-8016
HikFire HK-XS-8016 Addressable Fire Display Panel provides clear local indication of fire alarm events within a monitored area. Featuring a 128 × 64 LCD display, audible and visual alarm indication, and a non-polarity two-wire communication bus, the panel allows personnel to quickly view fire alarm information and identify events. Its compact wall-mounted design makes it suitable for offices, hotels, commercial buildings, industrial facilities and other premises using HikFire addressable fire alarm systems.
KSh8,500.00 Excl. VAT
HikFire Addressable I/O Module – Active High-Current Pulse Output HK-LD-8022
SKU: N/A
KSh8,000.00 Excl. VAT
HikFire Addressable I/O Module – Active Level Output HK-LD-8021
SKU: N/AHikFire Addressable I/O Module – Active Level Output HK-LD-8021
HikFire HK-LD-8021 Addressable I/O Module – Active Level Output provides reliable addressable control and monitoring for fire alarm linkage applications. Featuring an active-level output, the module can provide an electrical control signal to connected equipment while communicating with the fire alarm control panel through a two-wire, non-polarity bus. Its separate-base design, LED status indicators, external line monitoring and short-circuit protection make it suitable for integration into HikFire
KSh8,000.00 Excl. VAT
HikFire Addressable I/O Module – Passive Output HK-LD-8020
SKU: N/AHikFire Addressable I/O Module – Passive Output HK-LD-8020
HikFire HK-LD-8020 Addressable I/O Module – Passive Output provides a reliable interface between a HikFire addressable fire alarm system and external fire protection equipment. Featuring passive contact output and NO/NC input, the module can control devices such as electromagnetic valves and exhaust valves while providing equipment status feedback to the fire alarm control panel. Its non-polarity two-wire addressable communication, LED status indication, line break detection and short-circuit protection make it suitable for fire alarm system integration and control applications.
KSh4,500.00 Excl. VAT
Hikfire Isolator Module (HK-LD-8024)
SKU: N/AHikfire Isolator Module (HK-LD-8024)
HikFire HK-LD-8024 Addressable Isolator Module provides reliable short-circuit protection for HikFire addressable fire alarm loops. The module automatically isolates the affected section when a downstream bus short circuit occurs, helping maintain communication with the remaining devices on the loop. With two-wire polarity-free wiring, addressable coding and a separate base design, the HK-LD-8024 offers practical installation and maintenance for commercial, industrial and other fire alarm applications.
KSh32,000.00 Excl. VAT
HikFire NP-FTG200 LoRa Fire Gateway
SKU: N/ANP-FTG200 LoRa Fire Gateway
The NP-FTG200 LoRa Fire Gateway is the central control unit of the HikFire wireless fire alarm system. It communicates with wireless fire detection devices using long-range LoRa technology, enabling fast deployment without extensive cabling while providing reliable fire detection and alarm management. It supports up to 128 wireless devices and integrates with fire monitoring platforms such as HikCentral Professional.
KSh7,000.00 Excl. VAT
Desktop Stand bracket for HIK-TX-1400
SKU: N/ADesktop Stand bracket for HIK-TX-1400
The HIK-TX-1400 Desktop Stand Bracket is a sturdy mounting accessory designed specifically for the HIK-TX-1400 Fire Workstation. It provides a secure and ergonomic desktop installation, ensuring stable operation in fire command centers, monitoring stations, and control rooms. Its compact design allows the workstation to be positioned for optimal viewing while maintaining a professional and organized workspace.
KSh135,000.00 Excl. VAT
HikFire Workstation HK-TX-1400
SKU: N/AHikFire Workstation HK-TX-1400
The HK-TX-1400 Fire Workstation is a graphical monitoring workstation designed for centralized fire alarm management. It receives and displays fire alarm locations graphically, monitors the status of connected fire protection equipment in real time, and transmits building information to a higher-level command center.

HikFire LoRa Wireless Smoke Detector NP-FY200
HikFire LoRa Wireless Smoke Detector NP-FY200
NP-FY200 Photoelectric Smoke Alarm can detect smoke in
the early stage of a fire hazard, and provide warnings by
sending out audible and visual alarm signals. The alarm is
designed for residential and institutional applications

Hikfire Fire Alarm Loop Board HK8308/8324
Hikfire Fire Alarm Loop Board HK8308/8324
The HikFire HK8308 / HK8324 Loop Board is an electronic expansion and control component designed for compatible HikFire addressable fire alarm control panels. It provides the communication interface between the fire alarm control panel and connected addressable field devices.
The loop board enables the control panel to communicate with compatible smoke detectors, heat detectors, manual call points, sounders and addressable interface modules. It supports reliable device monitoring, alarm signal transmission and system communication.

HikFire Addressable Isolator Module HF-AIM1 (O-STD)
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
The HikFire HF-AIM1 (O-STD) Addressable Isolator Module provides short-circuit protection for compatible addressable fire alarm systems. It helps prevent a short circuit in one section of the loop from disrupting communication across the entire system, improving reliability and continuity of fire detection.

HikFire Addressable Manual Call Point HF-AMP1 (O-STD)
HikFire Addressable Manual Call Point HF-AMP1 (O-STD)
The HikFire HF-AMP1 (O-STD) Addressable Manual Call Point provides a reliable means of manually raising a fire alarm in an emergency. Designed for compatible HikFire addressable fire alarm systems, it enables the control panel to identify the activated device location. Its manual reset mechanism supports convenient resetting after activation.

HikFire Addressable Sounder Strobe HF-ASS1 (O-STD)
HikFire Addressable Sounder Strobe HF-ASS1 (O-STD)
The HikFire HF-ASS1 (O-STD) Addressable Sounder Strobe combines audible and visual alerts in one device for effective fire emergency notification. Designed for compatible HikFire addressable fire alarm systems, it communicates through the addressable bus and provides sound and flashing light when activated.

HikFire Addressable Heat Detector HF-AH1 (O-STD)
HikFire Addressable Heat Detector HF-AH1 (O-STD)
The HikFire HF-AH1 (O-STD) Addressable Heat Detector provides reliable heat detection for fire alarm installations in areas where smoke detectors may be unsuitable. It connects to a compatible addressable fire alarm system, enabling individual device identification and alarm monitoring.

HikFire HK-BMQ-8250 Encoder
HikFire HK-BMQ-8250 Encoder
The HikFire HK-BMQ-8250 Electronic Encoder is a professional address programming and testing tool designed for HikFire addressable fire alarm systems. It allows installers and technicians to read and write device addresses, register devices, check duplicate addresses, detect resistance and perform device programming and maintenance.

HikFire Addressable 4 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/4
HikFire Addressable 4 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/4
The HikFire JB-LBZ2-HK8308/4 is a 4-loop addressable fire alarm control and linkage panel designed for centralized fire alarm monitoring, indication and system control. With up to 250 addressable points per loop, the 4-loop configuration supports up to 1,000 addressable devices. The HK8308 series is available in configurations up to 8 loops.

HikFire Addressable 2 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/2
HikFire Addressable 2 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/2
The HikFire JB-LBZ2-HK8308/2 is a 2-loop addressable fire alarm control and linkage panel designed for centralized monitoring, alarm indication and fire-system control. It supports 250 addressable devices per loop, giving a standard capacity of up to 500 addressable points, with the HK8308 family supporting configurations up to 8 loops.

HikFire Addressable 1 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/1
HikFire Addressable 1 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/1
HikFire JB-LBZ2-HK8308/1 Addressable Fire Alarm Control Panel is a reliable 1-loop fire alarm control and linkage panel designed for intelligent fire detection and emergency control. Supporting up to 250 addressable devices on its loop and expandable to 8 loops, it provides centralized monitoring of detectors, manual call points, sounders and interface modules.

HikFire Addressable Fire Display Panel – HK-XS-8016
HikFire Addressable Fire Display Panel – HK-XS-8016
HikFire HK-XS-8016 Addressable Fire Display Panel provides clear local indication of fire alarm events within a monitored area. Featuring a 128 × 64 LCD display, audible and visual alarm indication, and a non-polarity two-wire communication bus, the panel allows personnel to quickly view fire alarm information and identify events. Its compact wall-mounted design makes it suitable for offices, hotels, commercial buildings, industrial facilities and other premises using HikFire addressable fire alarm systems.

HikFire Addressable I/O Module – Active High-Current Pulse Output HK-LD-8022

HikFire Addressable I/O Module – Active Level Output HK-LD-8021
HikFire Addressable I/O Module – Active Level Output HK-LD-8021
HikFire HK-LD-8021 Addressable I/O Module – Active Level Output provides reliable addressable control and monitoring for fire alarm linkage applications. Featuring an active-level output, the module can provide an electrical control signal to connected equipment while communicating with the fire alarm control panel through a two-wire, non-polarity bus. Its separate-base design, LED status indicators, external line monitoring and short-circuit protection make it suitable for integration into HikFire

HikFire Addressable I/O Module – Passive Output HK-LD-8020
HikFire Addressable I/O Module – Passive Output HK-LD-8020
HikFire HK-LD-8020 Addressable I/O Module – Passive Output provides a reliable interface between a HikFire addressable fire alarm system and external fire protection equipment. Featuring passive contact output and NO/NC input, the module can control devices such as electromagnetic valves and exhaust valves while providing equipment status feedback to the fire alarm control panel. Its non-polarity two-wire addressable communication, LED status indication, line break detection and short-circuit protection make it suitable for fire alarm system integration and control applications.


Hikfire Isolator Module (HK-LD-8024)
Hikfire Isolator Module (HK-LD-8024)
HikFire HK-LD-8024 Addressable Isolator Module provides reliable short-circuit protection for HikFire addressable fire alarm loops. The module automatically isolates the affected section when a downstream bus short circuit occurs, helping maintain communication with the remaining devices on the loop. With two-wire polarity-free wiring, addressable coding and a separate base design, the HK-LD-8024 offers practical installation and maintenance for commercial, industrial and other fire alarm applications.

HikFire NP-FTG200 LoRa Fire Gateway
NP-FTG200 LoRa Fire Gateway
The NP-FTG200 LoRa Fire Gateway is the central control unit of the HikFire wireless fire alarm system. It communicates with wireless fire detection devices using long-range LoRa technology, enabling fast deployment without extensive cabling while providing reliable fire detection and alarm management. It supports up to 128 wireless devices and integrates with fire monitoring platforms such as HikCentral Professional.

Desktop Stand bracket for HIK-TX-1400
Desktop Stand bracket for HIK-TX-1400
The HIK-TX-1400 Desktop Stand Bracket is a sturdy mounting accessory designed specifically for the HIK-TX-1400 Fire Workstation. It provides a secure and ergonomic desktop installation, ensuring stable operation in fire command centers, monitoring stations, and control rooms. Its compact design allows the workstation to be positioned for optimal viewing while maintaining a professional and organized workspace.

HikFire Workstation HK-TX-1400
HikFire Workstation HK-TX-1400
The HK-TX-1400 Fire Workstation is a graphical monitoring workstation designed for centralized fire alarm management. It receives and displays fire alarm locations graphically, monitors the status of connected fire protection equipment in real time, and transmits building information to a higher-level command center.

HikFire LoRa Wireless Smoke Detector NP-FY200
HikFire LoRa Wireless Smoke Detector NP-FY200
NP-FY200 Photoelectric Smoke Alarm can detect smoke in
the early stage of a fire hazard, and provide warnings by
sending out audible and visual alarm signals. The alarm is
designed for residential and institutional applications

Hikfire Fire Alarm Loop Board HK8308/8324
Hikfire Fire Alarm Loop Board HK8308/8324
The HikFire HK8308 / HK8324 Loop Board is an electronic expansion and control component designed for compatible HikFire addressable fire alarm control panels. It provides the communication interface between the fire alarm control panel and connected addressable field devices.
The loop board enables the control panel to communicate with compatible smoke detectors, heat detectors, manual call points, sounders and addressable interface modules. It supports reliable device monitoring, alarm signal transmission and system communication.

HikFire Addressable Isolator Module HF-AIM1 (O-STD)
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
The HikFire HF-AIM1 (O-STD) Addressable Isolator Module provides short-circuit protection for compatible addressable fire alarm systems. It helps prevent a short circuit in one section of the loop from disrupting communication across the entire system, improving reliability and continuity of fire detection.

HikFire Addressable Manual Call Point HF-AMP1 (O-STD)
HikFire Addressable Manual Call Point HF-AMP1 (O-STD)
The HikFire HF-AMP1 (O-STD) Addressable Manual Call Point provides a reliable means of manually raising a fire alarm in an emergency. Designed for compatible HikFire addressable fire alarm systems, it enables the control panel to identify the activated device location. Its manual reset mechanism supports convenient resetting after activation.

HikFire Addressable Sounder Strobe HF-ASS1 (O-STD)
HikFire Addressable Sounder Strobe HF-ASS1 (O-STD)
The HikFire HF-ASS1 (O-STD) Addressable Sounder Strobe combines audible and visual alerts in one device for effective fire emergency notification. Designed for compatible HikFire addressable fire alarm systems, it communicates through the addressable bus and provides sound and flashing light when activated.

HikFire Addressable Heat Detector HF-AH1 (O-STD)
HikFire Addressable Heat Detector HF-AH1 (O-STD)
The HikFire HF-AH1 (O-STD) Addressable Heat Detector provides reliable heat detection for fire alarm installations in areas where smoke detectors may be unsuitable. It connects to a compatible addressable fire alarm system, enabling individual device identification and alarm monitoring.

HikFire HK-BMQ-8250 Encoder
HikFire HK-BMQ-8250 Encoder
The HikFire HK-BMQ-8250 Electronic Encoder is a professional address programming and testing tool designed for HikFire addressable fire alarm systems. It allows installers and technicians to read and write device addresses, register devices, check duplicate addresses, detect resistance and perform device programming and maintenance.

HikFire Addressable 4 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/4
HikFire Addressable 4 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/4
The HikFire JB-LBZ2-HK8308/4 is a 4-loop addressable fire alarm control and linkage panel designed for centralized fire alarm monitoring, indication and system control. With up to 250 addressable points per loop, the 4-loop configuration supports up to 1,000 addressable devices. The HK8308 series is available in configurations up to 8 loops.

HikFire Addressable 2 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/2
HikFire Addressable 2 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/2
The HikFire JB-LBZ2-HK8308/2 is a 2-loop addressable fire alarm control and linkage panel designed for centralized monitoring, alarm indication and fire-system control. It supports 250 addressable devices per loop, giving a standard capacity of up to 500 addressable points, with the HK8308 family supporting configurations up to 8 loops.

HikFire Addressable 1 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/1
HikFire Addressable 1 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/1
HikFire JB-LBZ2-HK8308/1 Addressable Fire Alarm Control Panel is a reliable 1-loop fire alarm control and linkage panel designed for intelligent fire detection and emergency control. Supporting up to 250 addressable devices on its loop and expandable to 8 loops, it provides centralized monitoring of detectors, manual call points, sounders and interface modules.

HikFire Addressable Fire Display Panel – HK-XS-8016
HikFire Addressable Fire Display Panel – HK-XS-8016
HikFire HK-XS-8016 Addressable Fire Display Panel provides clear local indication of fire alarm events within a monitored area. Featuring a 128 × 64 LCD display, audible and visual alarm indication, and a non-polarity two-wire communication bus, the panel allows personnel to quickly view fire alarm information and identify events. Its compact wall-mounted design makes it suitable for offices, hotels, commercial buildings, industrial facilities and other premises using HikFire addressable fire alarm systems.

HikFire Addressable I/O Module – Active High-Current Pulse Output HK-LD-8022

HikFire Addressable I/O Module – Active Level Output HK-LD-8021
HikFire Addressable I/O Module – Active Level Output HK-LD-8021
HikFire HK-LD-8021 Addressable I/O Module – Active Level Output provides reliable addressable control and monitoring for fire alarm linkage applications. Featuring an active-level output, the module can provide an electrical control signal to connected equipment while communicating with the fire alarm control panel through a two-wire, non-polarity bus. Its separate-base design, LED status indicators, external line monitoring and short-circuit protection make it suitable for integration into HikFire

HikFire Addressable I/O Module – Passive Output HK-LD-8020
HikFire Addressable I/O Module – Passive Output HK-LD-8020
HikFire HK-LD-8020 Addressable I/O Module – Passive Output provides a reliable interface between a HikFire addressable fire alarm system and external fire protection equipment. Featuring passive contact output and NO/NC input, the module can control devices such as electromagnetic valves and exhaust valves while providing equipment status feedback to the fire alarm control panel. Its non-polarity two-wire addressable communication, LED status indication, line break detection and short-circuit protection make it suitable for fire alarm system integration and control applications.

Hikfire Isolator Module (HK-LD-8024)
Hikfire Isolator Module (HK-LD-8024)
HikFire HK-LD-8024 Addressable Isolator Module provides reliable short-circuit protection for HikFire addressable fire alarm loops. The module automatically isolates the affected section when a downstream bus short circuit occurs, helping maintain communication with the remaining devices on the loop. With two-wire polarity-free wiring, addressable coding and a separate base design, the HK-LD-8024 offers practical installation and maintenance for commercial, industrial and other fire alarm applications.

HikFire NP-FTG200 LoRa Fire Gateway
NP-FTG200 LoRa Fire Gateway
The NP-FTG200 LoRa Fire Gateway is the central control unit of the HikFire wireless fire alarm system. It communicates with wireless fire detection devices using long-range LoRa technology, enabling fast deployment without extensive cabling while providing reliable fire detection and alarm management. It supports up to 128 wireless devices and integrates with fire monitoring platforms such as HikCentral Professional.

Desktop Stand bracket for HIK-TX-1400
Desktop Stand bracket for HIK-TX-1400
The HIK-TX-1400 Desktop Stand Bracket is a sturdy mounting accessory designed specifically for the HIK-TX-1400 Fire Workstation. It provides a secure and ergonomic desktop installation, ensuring stable operation in fire command centers, monitoring stations, and control rooms. Its compact design allows the workstation to be positioned for optimal viewing while maintaining a professional and organized workspace.

HikFire Workstation HK-TX-1400
HikFire Workstation HK-TX-1400
The HK-TX-1400 Fire Workstation is a graphical monitoring workstation designed for centralized fire alarm management. It receives and displays fire alarm locations graphically, monitors the status of connected fire protection equipment in real time, and transmits building information to a higher-level command center.

HikFire LoRa Wireless Smoke Detector NP-FY200
HikFire LoRa Wireless Smoke Detector NP-FY200
NP-FY200 Photoelectric Smoke Alarm can detect smoke in
the early stage of a fire hazard, and provide warnings by
sending out audible and visual alarm signals. The alarm is
designed for residential and institutional applications

Hikfire Fire Alarm Loop Board HK8308/8324
Hikfire Fire Alarm Loop Board HK8308/8324
The HikFire HK8308 / HK8324 Loop Board is an electronic expansion and control component designed for compatible HikFire addressable fire alarm control panels. It provides the communication interface between the fire alarm control panel and connected addressable field devices.
The loop board enables the control panel to communicate with compatible smoke detectors, heat detectors, manual call points, sounders and addressable interface modules. It supports reliable device monitoring, alarm signal transmission and system communication.

HikFire Addressable Isolator Module HF-AIM1 (O-STD)
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
The HikFire HF-AIM1 (O-STD) Addressable Isolator Module provides short-circuit protection for compatible addressable fire alarm systems. It helps prevent a short circuit in one section of the loop from disrupting communication across the entire system, improving reliability and continuity of fire detection.

HikFire Addressable Manual Call Point HF-AMP1 (O-STD)
HikFire Addressable Manual Call Point HF-AMP1 (O-STD)
The HikFire HF-AMP1 (O-STD) Addressable Manual Call Point provides a reliable means of manually raising a fire alarm in an emergency. Designed for compatible HikFire addressable fire alarm systems, it enables the control panel to identify the activated device location. Its manual reset mechanism supports convenient resetting after activation.

HikFire Addressable Sounder Strobe HF-ASS1 (O-STD)
HikFire Addressable Sounder Strobe HF-ASS1 (O-STD)
The HikFire HF-ASS1 (O-STD) Addressable Sounder Strobe combines audible and visual alerts in one device for effective fire emergency notification. Designed for compatible HikFire addressable fire alarm systems, it communicates through the addressable bus and provides sound and flashing light when activated.

HikFire Addressable Heat Detector HF-AH1 (O-STD)
HikFire Addressable Heat Detector HF-AH1 (O-STD)
The HikFire HF-AH1 (O-STD) Addressable Heat Detector provides reliable heat detection for fire alarm installations in areas where smoke detectors may be unsuitable. It connects to a compatible addressable fire alarm system, enabling individual device identification and alarm monitoring.

HikFire HK-BMQ-8250 Encoder
HikFire HK-BMQ-8250 Encoder
The HikFire HK-BMQ-8250 Electronic Encoder is a professional address programming and testing tool designed for HikFire addressable fire alarm systems. It allows installers and technicians to read and write device addresses, register devices, check duplicate addresses, detect resistance and perform device programming and maintenance.

HikFire Addressable 4 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/4
HikFire Addressable 4 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/4
The HikFire JB-LBZ2-HK8308/4 is a 4-loop addressable fire alarm control and linkage panel designed for centralized fire alarm monitoring, indication and system control. With up to 250 addressable points per loop, the 4-loop configuration supports up to 1,000 addressable devices. The HK8308 series is available in configurations up to 8 loops.

HikFire Addressable 2 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/2
HikFire Addressable 2 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/2
The HikFire JB-LBZ2-HK8308/2 is a 2-loop addressable fire alarm control and linkage panel designed for centralized monitoring, alarm indication and fire-system control. It supports 250 addressable devices per loop, giving a standard capacity of up to 500 addressable points, with the HK8308 family supporting configurations up to 8 loops.

HikFire Addressable 1 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/1
HikFire Addressable 1 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/1
HikFire JB-LBZ2-HK8308/1 Addressable Fire Alarm Control Panel is a reliable 1-loop fire alarm control and linkage panel designed for intelligent fire detection and emergency control. Supporting up to 250 addressable devices on its loop and expandable to 8 loops, it provides centralized monitoring of detectors, manual call points, sounders and interface modules.

HikFire Addressable Fire Display Panel – HK-XS-8016
HikFire Addressable Fire Display Panel – HK-XS-8016
HikFire HK-XS-8016 Addressable Fire Display Panel provides clear local indication of fire alarm events within a monitored area. Featuring a 128 × 64 LCD display, audible and visual alarm indication, and a non-polarity two-wire communication bus, the panel allows personnel to quickly view fire alarm information and identify events. Its compact wall-mounted design makes it suitable for offices, hotels, commercial buildings, industrial facilities and other premises using HikFire addressable fire alarm systems.

HikFire Addressable I/O Module – Active High-Current Pulse Output HK-LD-8022

HikFire Addressable I/O Module – Active Level Output HK-LD-8021
HikFire Addressable I/O Module – Active Level Output HK-LD-8021
HikFire HK-LD-8021 Addressable I/O Module – Active Level Output provides reliable addressable control and monitoring for fire alarm linkage applications. Featuring an active-level output, the module can provide an electrical control signal to connected equipment while communicating with the fire alarm control panel through a two-wire, non-polarity bus. Its separate-base design, LED status indicators, external line monitoring and short-circuit protection make it suitable for integration into HikFire

HikFire Addressable I/O Module – Passive Output HK-LD-8020
HikFire Addressable I/O Module – Passive Output HK-LD-8020
HikFire HK-LD-8020 Addressable I/O Module – Passive Output provides a reliable interface between a HikFire addressable fire alarm system and external fire protection equipment. Featuring passive contact output and NO/NC input, the module can control devices such as electromagnetic valves and exhaust valves while providing equipment status feedback to the fire alarm control panel. Its non-polarity two-wire addressable communication, LED status indication, line break detection and short-circuit protection make it suitable for fire alarm system integration and control applications.

Hikfire Isolator Module (HK-LD-8024)
Hikfire Isolator Module (HK-LD-8024)
HikFire HK-LD-8024 Addressable Isolator Module provides reliable short-circuit protection for HikFire addressable fire alarm loops. The module automatically isolates the affected section when a downstream bus short circuit occurs, helping maintain communication with the remaining devices on the loop. With two-wire polarity-free wiring, addressable coding and a separate base design, the HK-LD-8024 offers practical installation and maintenance for commercial, industrial and other fire alarm applications.

HikFire NP-FTG200 LoRa Fire Gateway
NP-FTG200 LoRa Fire Gateway
The NP-FTG200 LoRa Fire Gateway is the central control unit of the HikFire wireless fire alarm system. It communicates with wireless fire detection devices using long-range LoRa technology, enabling fast deployment without extensive cabling while providing reliable fire detection and alarm management. It supports up to 128 wireless devices and integrates with fire monitoring platforms such as HikCentral Professional.

Desktop Stand bracket for HIK-TX-1400
Desktop Stand bracket for HIK-TX-1400
The HIK-TX-1400 Desktop Stand Bracket is a sturdy mounting accessory designed specifically for the HIK-TX-1400 Fire Workstation. It provides a secure and ergonomic desktop installation, ensuring stable operation in fire command centers, monitoring stations, and control rooms. Its compact design allows the workstation to be positioned for optimal viewing while maintaining a professional and organized workspace.

HikFire Workstation HK-TX-1400
HikFire Workstation HK-TX-1400
The HK-TX-1400 Fire Workstation is a graphical monitoring workstation designed for centralized fire alarm management. It receives and displays fire alarm locations graphically, monitors the status of connected fire protection equipment in real time, and transmits building information to a higher-level command center.
