- Key Features
- Compatible with C-TEC’s entire range of 800 Series field devices
- Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm
- Two call levels – standard (constant tone) and emergency (intermittent tone)
- Optional mute and call accept/reset buttons
- ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used)
- Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call
- Innovative slide-in labelling system
- Zones can be wired in 4 or 6 core (7/02) stranded security cable
- Additional master controllers and expansion units available for use as repeaters on larger sites
- Optional boxed PSUs c/w with space for a 12V VRLA battery available for sites where a standby battery facility is required
cility is required.
- 2 key nurse call button: Call & Cancel
- 100% Waterproof
- Different silicon printing for different usage:
EC-200CX: Red silicon for patients to call nurses
EC-200NX: Green silicon for nurses to inform Nurse Center they have attended
EC-200AX: Yellow silicon for nurses to call Nurse Center for help
EC-200CB: Blue silicon for Code Blue (emergency calling) - White durable ABS enclosure
- Built-in antenna
- Installation: Wall-mounted / Stick on any surface
- Dual red LEDs and triangular diffuser make it highly visible from a distance.
- Can also be used as an ‘area indicator’ at corridor junctions, staff workstations, etc.
- Finished in tough, durable ABS plastic.
- Also available as part of the NC951 Accessible Toilet Alarm kit.
- Stainless steel version also available.
- Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device.
- Indicates Standard calls via a constant tone/constant red light and Emergency calls via a pulsing tone/pulsing red light.
- Mounts on a standard UK 25mm single gang flush or surface back box.
- A short 1.8m tail call lead for use with C-TEC’s Quantec and 800 Series Call Systems.
- Allows users to remotely generate Standard calls from armchairs, beds, etc.
- Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug.
- Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.
- Activating the pear push or removing the tail call lead from a call point’s remote socket will generate a Standard call.
- An attractively designed button-operated call/reset point capable of generating Standard calls on an 800 Series Call System.
- Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
- Red reassurance LED confirms a call has been made.
- Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
- Mounts on a standard UK 25mm single gang flush or surface back box.
- Easy to press big red call button
- Green button to reset
- Call reassurance LED
- Comes with lanyard clip and plastic wall-mounted bracket for storage
- Can be used to generate a standard call on an 800 Series Conventional Call System.
- Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be canceled.
- Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
- Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
- Surface mountable.
- Base fits 16mm conduit and BESA centres.
- 2 key nurse call button with pull cord: Call: Press big red call button or Pull the cord; Cancel: Press the small red cancel button
- 100% Waterproof
- With 2 meters pull cord & triangle pull ring for easy pull
- White durable ABS enclosure
- Built-in antenna
- Installation : Wall-mounted / Stick on any surface
- 2 key nurse call button with patient handset: Call: Press the big red call button on the panel or big red call button on the patient handset; Cancel: Press small red cancel button on the panel or small red cancel button on the patient handset
- 100% Waterproof
- With 1-meter spiral telephone cable & handset for easy press
- White durable ABS enclosure
- Built-in antenna
- Wall-mounted / Stick on any surface
- Display 3 groups of 3-digit numbers from 000 to 999 with the “AbCdEF” letter
- Display current time when it is on standby
- Works with 400pcs of call buttons (Max)
- Show last 32 calls – rolling until the call is canceled
- Can cancel callings via remote controls, 32pcs remote controls in max
- Indicate the service type by dots:1 indicator dot: call; 2 indicator dots: order; 3 indicator dots: bill
- Adjustable ringtone and volume
- Desktop-type / Wall-mounted type receiver
KSh68,000.00 C-Tec 20 Zone Master Call Control Panel NC920S
SKU: N/AC-Tec 20 Zone Master Call Control Panel NC920S
KSh2,500.00 Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
SKU: N/AVisit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
KSh5,500.00 Excl. VAT
Double Pole Relay S/E60/A 12VDC
SKU: N/ADouble Pole Relay S/E60/A 12VDC
The S/E60/A 12VDC Coil Relay is a relay interface designed to connect HARK assistance alarm systems to external equipment. It provides a convenient switching interface for systems such as BMS, fire alarms, intruder alarms and paging transmitters.
KSh10,000.00 Excl. VAT
N/HARK/1/PSU HARK Power Supply Unit
SKU: N/AN/HARK/1/PSU HARK Power Supply Unit
The HARK N/HARK/1/PSU Power Supply Unit is a 12V power supply component designed for the HARK Disabled Toilet Alarm System. It provides the required power for the HARK assistance alarm system and works with the overdoor indicator/sounder to provide audible and visual indication when an emergency call is activated.
KSh13,500.00 Excl. VAT
HARK Push Button N/HARK/1/PB
SKU: N/AHARK Push Button N/HARK/1/PB
The HARK N/HARK/1/PB Push Button is an emergency assistance button designed for use with the HARK Disabled Toilet Alarm System. It provides an alternative to a hanging pull cord, allowing a user in distress to activate the assistance alarm by pressing the button.
KSh6,500.00 Excl. VAT
HARK Reset Unit N/HARK/1/RS
SKU: N/AHARK Reset Unit N/HARK/1/RS
The HARK N/HARK/1/RS Reset Unit is designed for the HARK Disabled Toilet Alarm System, allowing an activated emergency call to be quickly reset. When a call is triggered, the reset switch illuminates and its internal sounder provides audible reassurance. The switch also features a Braille legend for accessibility.
KSh8,500.00 Excl. VAT
HARK Pull Cord N/HARK/1/PC
SKU: N/AHARK Pull Cord N/HARK/1/PC
The HARK N/HARK/1/PC Pull Cord is a 12V emergency pull-cord unit designed for HARK disabled toilet and assistance alarm systems. Pulling the cord activates the emergency call, provides visual reassurance, and triggers the connected reset and indicator/sounder units.
KSh7,500.00 Excl. VAT
Channel B/12V/2.8AH/SLA Batt 2.8Ah 12V
SKU: N/AChannel B/12V/2.8AH/SLA Batt 2.8Ah 12V
Channel B/12V/2.8AH/SLA is a 12V 2.8Ah Sealed Lead Acid (SLA) rechargeable battery designed for reliable standby power in fire alarm, security, emergency lighting and other backup systems.
KSh73,000.00 Excl. VAT
C-TEC EMERGENCY INDICATOR PANEL 20 ZONE NC822KE
SKU: N/AC-TEC EMERGENCY INDICATOR PANEL 20 ZONE NC822KE
The NC812KE, NC822KE and NC832KE indicator panels are fully compatible with all 800 Series call points, ceiling pulls, infrared ceiling receivers, monitoring points, overdoor lights and remote sounders.
Depending on the devices wired to it, standard and emergency calls can be indicated via its buzzer and zonal LEDs. An optional mute button is also provided to allow the user to silence standard calls.
Standard Calls: When triggered by a calling device, the indicator panel’s internal buzzer sounds continuously and the relevant zone indicator(s) illuminate steadily.
Pressing the Indicator Panel’s Mute Button, if fitted, silences the Panel’s internal buzzer. However, if a new call (standard or emergency) is triggered anywhere on the system, the buzzer will resound.
Emergency Calls: When triggered by a calling device, the Indicator Panel’s internal buzzer pulses and the relevant zone indicator(s) flash. This level of call takes priority over standard calls and cannot be muted at the panel. An emergency call can only be reset at the device from which it was triggered or via a reset point wired on the same zone.
KSh58,000.00 Excl. VAT
C-Tec N/CC/910s 10 Zone Expansion Unit
SKU: N/AC-Tec N/CC/910s 10 Zone Expansion Unit
The C-TEC NC910ES 10-Zone Expansion Unit is a surface-mounted expansion module designed to extend the zoning capacity of NC910S and NC920S Call Controllers. It provides 10 additional zones, with individual LED indicators for standard and emergency calls. The unit uses the master controller for audible alarm indication and features a convenient slide-in labelling system for clear zone identification.
KSh20,000.00 N/HARK/1 HARK Disabled Toilet alarm Kit
SKU: 209N/HARK/1 HARK Disabled Toilet alarm Kit
includes a pull cord unit, reset point and power supply / indicator.
• Sounder within the reset unit to give audible reassurance that assistance is on the way
• Braille text on the reset unit
• Only 3 points to install on a standard system
• Can be simply linked to other systems
• Assists in ensuring compliance with the DDA BS8300 & other care standards
• Simple to expand
• Multi-way remote indicator units available
• Twin pull cord rings supplied
• Disabled Persons sticker supplied
KSh11,500.00 C-tec Overdoor Light with Sounder NC806CS
SKU: 158C-tec Overdoor Light with Sounder NC806CS
KSh8,500.00 Excl. VAT
NC805C/6 Pear Push Extension Call Lead – 2m
SKU: 157NC805C/6 Pear Push Extension Call Lead – 2m
KSh6,500.00 Excl. VAT
N/C/802DB Standard Call Point With Button Reset And Remote Socket
SKU: 156N/C/802DB Standard Call Point With Button Reset And Remote Socket
KSh3,500.00 Excl. VAT
Wireless Patient Handset Call Cord With Bed Head Call & Cancel Function
SKU: 248Wireless Patient Handset Call Cord With Bed Head Call & Cancel Function
KSh3,500.00 Excl. VAT
Wireless Call Button With Emergency Pull Cord
SKU: 247Wireless Call Button With Emergency Pull Cord
Placed on the wall in patients’ room or Toilet for emergency calls. It is easy to be caught in emergency situations.
| Working frequency | 433MHZ |
| Power | 12 V 23 A Battery |
| Battery life | Appro. calling 40,000 times |
| Package | 2 pcs per box |
| Transmission distance | 300 m (open area) |
| Size | 85 x 85 x 15mm (Panel) |
KSh8,500.00 Excl. VAT
C-TEC Nursecall Ceiling Pull Unit NC807C
SKU: N/ANursecall Ceiling Pull Unit
KSh6,500.00 Excl. VAT
Nurse Call Button with Pull Cord EC-220PT
SKU: N/ANurse Call Button
KSh3,500.00 Nurse Call Button with Patient Handset EC-220PH
SKU: N/AVisit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
KSh25,000.00 Excl. VAT
Nursecall Wireless Receiver CT-R330
SKU: N/ANursecall Wireless Receiver CT-R330
- Key Features
- Compatible with C-TEC’s entire range of 800 Series field devices
- Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm
- Two call levels – standard (constant tone) and emergency (intermittent tone)
- Optional mute and call accept/reset buttons
- ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used)
- Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call
- Innovative slide-in labelling system
- Zones can be wired in 4 or 6 core (7/02) stranded security cable
- Additional master controllers and expansion units available for use as repeaters on larger sites
- Optional boxed PSUs c/w with space for a 12V VRLA battery available for sites where a standby battery facility is required
cility is required.
- 2 key nurse call button: Call & Cancel
- 100% Waterproof
- Different silicon printing for different usage:
EC-200CX: Red silicon for patients to call nurses
EC-200NX: Green silicon for nurses to inform Nurse Center they have attended
EC-200AX: Yellow silicon for nurses to call Nurse Center for help
EC-200CB: Blue silicon for Code Blue (emergency calling) - White durable ABS enclosure
- Built-in antenna
- Installation: Wall-mounted / Stick on any surface
- Dual red LEDs and triangular diffuser make it highly visible from a distance.
- Can also be used as an ‘area indicator’ at corridor junctions, staff workstations, etc.
- Finished in tough, durable ABS plastic.
- Also available as part of the NC951 Accessible Toilet Alarm kit.
- Stainless steel version also available.
- Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device.
- Indicates Standard calls via a constant tone/constant red light and Emergency calls via a pulsing tone/pulsing red light.
- Mounts on a standard UK 25mm single gang flush or surface back box.
- A short 1.8m tail call lead for use with C-TEC’s Quantec and 800 Series Call Systems.
- Allows users to remotely generate Standard calls from armchairs, beds, etc.
- Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug.
- Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.
- Activating the pear push or removing the tail call lead from a call point’s remote socket will generate a Standard call.
- An attractively designed button-operated call/reset point capable of generating Standard calls on an 800 Series Call System.
- Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
- Red reassurance LED confirms a call has been made.
- Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
- Mounts on a standard UK 25mm single gang flush or surface back box.
- Easy to press big red call button
- Green button to reset
- Call reassurance LED
- Comes with lanyard clip and plastic wall-mounted bracket for storage
- Can be used to generate a standard call on an 800 Series Conventional Call System.
- Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be canceled.
- Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
- Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
- Surface mountable.
- Base fits 16mm conduit and BESA centres.
- 2 key nurse call button with pull cord: Call: Press big red call button or Pull the cord; Cancel: Press the small red cancel button
- 100% Waterproof
- With 2 meters pull cord & triangle pull ring for easy pull
- White durable ABS enclosure
- Built-in antenna
- Installation : Wall-mounted / Stick on any surface
- 2 key nurse call button with patient handset: Call: Press the big red call button on the panel or big red call button on the patient handset; Cancel: Press small red cancel button on the panel or small red cancel button on the patient handset
- 100% Waterproof
- With 1-meter spiral telephone cable & handset for easy press
- White durable ABS enclosure
- Built-in antenna
- Wall-mounted / Stick on any surface
- Display 3 groups of 3-digit numbers from 000 to 999 with the “AbCdEF” letter
- Display current time when it is on standby
- Works with 400pcs of call buttons (Max)
- Show last 32 calls – rolling until the call is canceled
- Can cancel callings via remote controls, 32pcs remote controls in max
- Indicate the service type by dots:1 indicator dot: call; 2 indicator dots: order; 3 indicator dots: bill
- Adjustable ringtone and volume
- Desktop-type / Wall-mounted type receiver
C-Tec 20 Zone Master Call Control Panel NC920S
C-Tec 20 Zone Master Call Control Panel NC920S
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
Double Pole Relay S/E60/A 12VDC
Double Pole Relay S/E60/A 12VDC
The S/E60/A 12VDC Coil Relay is a relay interface designed to connect HARK assistance alarm systems to external equipment. It provides a convenient switching interface for systems such as BMS, fire alarms, intruder alarms and paging transmitters.
N/HARK/1/PSU HARK Power Supply Unit
N/HARK/1/PSU HARK Power Supply Unit
The HARK N/HARK/1/PSU Power Supply Unit is a 12V power supply component designed for the HARK Disabled Toilet Alarm System. It provides the required power for the HARK assistance alarm system and works with the overdoor indicator/sounder to provide audible and visual indication when an emergency call is activated.
HARK Push Button N/HARK/1/PB
HARK Push Button N/HARK/1/PB
The HARK N/HARK/1/PB Push Button is an emergency assistance button designed for use with the HARK Disabled Toilet Alarm System. It provides an alternative to a hanging pull cord, allowing a user in distress to activate the assistance alarm by pressing the button.
HARK Reset Unit N/HARK/1/RS
HARK Reset Unit N/HARK/1/RS
The HARK N/HARK/1/RS Reset Unit is designed for the HARK Disabled Toilet Alarm System, allowing an activated emergency call to be quickly reset. When a call is triggered, the reset switch illuminates and its internal sounder provides audible reassurance. The switch also features a Braille legend for accessibility.
HARK Pull Cord N/HARK/1/PC
HARK Pull Cord N/HARK/1/PC
The HARK N/HARK/1/PC Pull Cord is a 12V emergency pull-cord unit designed for HARK disabled toilet and assistance alarm systems. Pulling the cord activates the emergency call, provides visual reassurance, and triggers the connected reset and indicator/sounder units.
Channel B/12V/2.8AH/SLA Batt 2.8Ah 12V
Channel B/12V/2.8AH/SLA Batt 2.8Ah 12V
Channel B/12V/2.8AH/SLA is a 12V 2.8Ah Sealed Lead Acid (SLA) rechargeable battery designed for reliable standby power in fire alarm, security, emergency lighting and other backup systems.
C-TEC EMERGENCY INDICATOR PANEL 20 ZONE NC822KE
C-TEC EMERGENCY INDICATOR PANEL 20 ZONE NC822KE
The NC812KE, NC822KE and NC832KE indicator panels are fully compatible with all 800 Series call points, ceiling pulls, infrared ceiling receivers, monitoring points, overdoor lights and remote sounders.
Depending on the devices wired to it, standard and emergency calls can be indicated via its buzzer and zonal LEDs. An optional mute button is also provided to allow the user to silence standard calls.
Standard Calls: When triggered by a calling device, the indicator panel’s internal buzzer sounds continuously and the relevant zone indicator(s) illuminate steadily.
Pressing the Indicator Panel’s Mute Button, if fitted, silences the Panel’s internal buzzer. However, if a new call (standard or emergency) is triggered anywhere on the system, the buzzer will resound.
Emergency Calls: When triggered by a calling device, the Indicator Panel’s internal buzzer pulses and the relevant zone indicator(s) flash. This level of call takes priority over standard calls and cannot be muted at the panel. An emergency call can only be reset at the device from which it was triggered or via a reset point wired on the same zone.
C-Tec N/CC/910s 10 Zone Expansion Unit
C-Tec N/CC/910s 10 Zone Expansion Unit
The C-TEC NC910ES 10-Zone Expansion Unit is a surface-mounted expansion module designed to extend the zoning capacity of NC910S and NC920S Call Controllers. It provides 10 additional zones, with individual LED indicators for standard and emergency calls. The unit uses the master controller for audible alarm indication and features a convenient slide-in labelling system for clear zone identification.
N/HARK/1 HARK Disabled Toilet alarm Kit
N/HARK/1 HARK Disabled Toilet alarm Kit
includes a pull cord unit, reset point and power supply / indicator.
• Sounder within the reset unit to give audible reassurance that assistance is on the way
• Braille text on the reset unit
• Only 3 points to install on a standard system
• Can be simply linked to other systems
• Assists in ensuring compliance with the DDA BS8300 & other care standards
• Simple to expand
• Multi-way remote indicator units available
• Twin pull cord rings supplied
• Disabled Persons sticker supplied
C-tec Overdoor Light with Sounder NC806CS
C-tec Overdoor Light with Sounder NC806CS
NC805C/6 Pear Push Extension Call Lead – 2m
NC805C/6 Pear Push Extension Call Lead – 2m
N/C/802DB Standard Call Point With Button Reset And Remote Socket
N/C/802DB Standard Call Point With Button Reset And Remote Socket
Wireless Patient Handset Call Cord With Bed Head Call & Cancel Function
Wireless Patient Handset Call Cord With Bed Head Call & Cancel Function
Wireless Call Button With Emergency Pull Cord
Wireless Call Button With Emergency Pull Cord
Placed on the wall in patients’ room or Toilet for emergency calls. It is easy to be caught in emergency situations.
| Working frequency | 433MHZ |
| Power | 12 V 23 A Battery |
| Battery life | Appro. calling 40,000 times |
| Package | 2 pcs per box |
| Transmission distance | 300 m (open area) |
| Size | 85 x 85 x 15mm (Panel) |
C-TEC Nursecall Ceiling Pull Unit NC807C
Nursecall Ceiling Pull Unit
Nurse Call Button with Pull Cord EC-220PT
Nurse Call Button
Nurse Call Button with Patient Handset EC-220PH
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall Wireless Receiver CT-R330
Nursecall Wireless Receiver CT-R330
- Key Features
- Compatible with C-TEC’s entire range of 800 Series field devices
- Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm
- Two call levels – standard (constant tone) and emergency (intermittent tone)
- Optional mute and call accept/reset buttons
- ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used)
- Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call
- Innovative slide-in labelling system
- Zones can be wired in 4 or 6 core (7/02) stranded security cable
- Additional master controllers and expansion units available for use as repeaters on larger sites
- Optional boxed PSUs c/w with space for a 12V VRLA battery available for sites where a standby battery facility is required
cility is required.
- 2 key nurse call button: Call & Cancel
- 100% Waterproof
- Different silicon printing for different usage:
EC-200CX: Red silicon for patients to call nurses
EC-200NX: Green silicon for nurses to inform Nurse Center they have attended
EC-200AX: Yellow silicon for nurses to call Nurse Center for help
EC-200CB: Blue silicon for Code Blue (emergency calling) - White durable ABS enclosure
- Built-in antenna
- Installation: Wall-mounted / Stick on any surface
- Dual red LEDs and triangular diffuser make it highly visible from a distance.
- Can also be used as an ‘area indicator’ at corridor junctions, staff workstations, etc.
- Finished in tough, durable ABS plastic.
- Also available as part of the NC951 Accessible Toilet Alarm kit.
- Stainless steel version also available.
- Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device.
- Indicates Standard calls via a constant tone/constant red light and Emergency calls via a pulsing tone/pulsing red light.
- Mounts on a standard UK 25mm single gang flush or surface back box.
- A short 1.8m tail call lead for use with C-TEC’s Quantec and 800 Series Call Systems.
- Allows users to remotely generate Standard calls from armchairs, beds, etc.
- Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug.
- Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.
- Activating the pear push or removing the tail call lead from a call point’s remote socket will generate a Standard call.
- An attractively designed button-operated call/reset point capable of generating Standard calls on an 800 Series Call System.
- Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
- Red reassurance LED confirms a call has been made.
- Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
- Mounts on a standard UK 25mm single gang flush or surface back box.
- Easy to press big red call button
- Green button to reset
- Call reassurance LED
- Comes with lanyard clip and plastic wall-mounted bracket for storage
- Can be used to generate a standard call on an 800 Series Conventional Call System.
- Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be canceled.
- Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
- Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
- Surface mountable.
- Base fits 16mm conduit and BESA centres.
- 2 key nurse call button with pull cord: Call: Press big red call button or Pull the cord; Cancel: Press the small red cancel button
- 100% Waterproof
- With 2 meters pull cord & triangle pull ring for easy pull
- White durable ABS enclosure
- Built-in antenna
- Installation : Wall-mounted / Stick on any surface
- 2 key nurse call button with patient handset: Call: Press the big red call button on the panel or big red call button on the patient handset; Cancel: Press small red cancel button on the panel or small red cancel button on the patient handset
- 100% Waterproof
- With 1-meter spiral telephone cable & handset for easy press
- White durable ABS enclosure
- Built-in antenna
- Wall-mounted / Stick on any surface
- Display 3 groups of 3-digit numbers from 000 to 999 with the “AbCdEF” letter
- Display current time when it is on standby
- Works with 400pcs of call buttons (Max)
- Show last 32 calls – rolling until the call is canceled
- Can cancel callings via remote controls, 32pcs remote controls in max
- Indicate the service type by dots:1 indicator dot: call; 2 indicator dots: order; 3 indicator dots: bill
- Adjustable ringtone and volume
- Desktop-type / Wall-mounted type receiver
C-Tec 20 Zone Master Call Control Panel NC920S
C-Tec 20 Zone Master Call Control Panel NC920S
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
Double Pole Relay S/E60/A 12VDC
Double Pole Relay S/E60/A 12VDC
The S/E60/A 12VDC Coil Relay is a relay interface designed to connect HARK assistance alarm systems to external equipment. It provides a convenient switching interface for systems such as BMS, fire alarms, intruder alarms and paging transmitters.
N/HARK/1/PSU HARK Power Supply Unit
N/HARK/1/PSU HARK Power Supply Unit
The HARK N/HARK/1/PSU Power Supply Unit is a 12V power supply component designed for the HARK Disabled Toilet Alarm System. It provides the required power for the HARK assistance alarm system and works with the overdoor indicator/sounder to provide audible and visual indication when an emergency call is activated.
HARK Push Button N/HARK/1/PB
HARK Push Button N/HARK/1/PB
The HARK N/HARK/1/PB Push Button is an emergency assistance button designed for use with the HARK Disabled Toilet Alarm System. It provides an alternative to a hanging pull cord, allowing a user in distress to activate the assistance alarm by pressing the button.
HARK Reset Unit N/HARK/1/RS
HARK Reset Unit N/HARK/1/RS
The HARK N/HARK/1/RS Reset Unit is designed for the HARK Disabled Toilet Alarm System, allowing an activated emergency call to be quickly reset. When a call is triggered, the reset switch illuminates and its internal sounder provides audible reassurance. The switch also features a Braille legend for accessibility.
HARK Pull Cord N/HARK/1/PC
HARK Pull Cord N/HARK/1/PC
The HARK N/HARK/1/PC Pull Cord is a 12V emergency pull-cord unit designed for HARK disabled toilet and assistance alarm systems. Pulling the cord activates the emergency call, provides visual reassurance, and triggers the connected reset and indicator/sounder units.
Channel B/12V/2.8AH/SLA Batt 2.8Ah 12V
Channel B/12V/2.8AH/SLA Batt 2.8Ah 12V
Channel B/12V/2.8AH/SLA is a 12V 2.8Ah Sealed Lead Acid (SLA) rechargeable battery designed for reliable standby power in fire alarm, security, emergency lighting and other backup systems.
C-TEC EMERGENCY INDICATOR PANEL 20 ZONE NC822KE
C-TEC EMERGENCY INDICATOR PANEL 20 ZONE NC822KE
The NC812KE, NC822KE and NC832KE indicator panels are fully compatible with all 800 Series call points, ceiling pulls, infrared ceiling receivers, monitoring points, overdoor lights and remote sounders.
Depending on the devices wired to it, standard and emergency calls can be indicated via its buzzer and zonal LEDs. An optional mute button is also provided to allow the user to silence standard calls.
Standard Calls: When triggered by a calling device, the indicator panel’s internal buzzer sounds continuously and the relevant zone indicator(s) illuminate steadily.
Pressing the Indicator Panel’s Mute Button, if fitted, silences the Panel’s internal buzzer. However, if a new call (standard or emergency) is triggered anywhere on the system, the buzzer will resound.
Emergency Calls: When triggered by a calling device, the Indicator Panel’s internal buzzer pulses and the relevant zone indicator(s) flash. This level of call takes priority over standard calls and cannot be muted at the panel. An emergency call can only be reset at the device from which it was triggered or via a reset point wired on the same zone.
C-Tec N/CC/910s 10 Zone Expansion Unit
C-Tec N/CC/910s 10 Zone Expansion Unit
The C-TEC NC910ES 10-Zone Expansion Unit is a surface-mounted expansion module designed to extend the zoning capacity of NC910S and NC920S Call Controllers. It provides 10 additional zones, with individual LED indicators for standard and emergency calls. The unit uses the master controller for audible alarm indication and features a convenient slide-in labelling system for clear zone identification.
N/HARK/1 HARK Disabled Toilet alarm Kit
N/HARK/1 HARK Disabled Toilet alarm Kit
includes a pull cord unit, reset point and power supply / indicator.
• Sounder within the reset unit to give audible reassurance that assistance is on the way
• Braille text on the reset unit
• Only 3 points to install on a standard system
• Can be simply linked to other systems
• Assists in ensuring compliance with the DDA BS8300 & other care standards
• Simple to expand
• Multi-way remote indicator units available
• Twin pull cord rings supplied
• Disabled Persons sticker supplied
C-tec Overdoor Light with Sounder NC806CS
C-tec Overdoor Light with Sounder NC806CS
NC805C/6 Pear Push Extension Call Lead – 2m
NC805C/6 Pear Push Extension Call Lead – 2m
N/C/802DB Standard Call Point With Button Reset And Remote Socket
N/C/802DB Standard Call Point With Button Reset And Remote Socket
Wireless Patient Handset Call Cord With Bed Head Call & Cancel Function
Wireless Patient Handset Call Cord With Bed Head Call & Cancel Function
Wireless Call Button With Emergency Pull Cord
Wireless Call Button With Emergency Pull Cord
Placed on the wall in patients’ room or Toilet for emergency calls. It is easy to be caught in emergency situations.
| Working frequency | 433MHZ |
| Power | 12 V 23 A Battery |
| Battery life | Appro. calling 40,000 times |
| Package | 2 pcs per box |
| Transmission distance | 300 m (open area) |
| Size | 85 x 85 x 15mm (Panel) |
C-TEC Nursecall Ceiling Pull Unit NC807C
Nursecall Ceiling Pull Unit
Nurse Call Button with Pull Cord EC-220PT
Nurse Call Button
Nurse Call Button with Patient Handset EC-220PH
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall Wireless Receiver CT-R330
Nursecall Wireless Receiver CT-R330
- Key Features
- Compatible with C-TEC’s entire range of 800 Series field devices
- Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm
- Two call levels – standard (constant tone) and emergency (intermittent tone)
- Optional mute and call accept/reset buttons
- ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used)
- Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call
- Innovative slide-in labelling system
- Zones can be wired in 4 or 6 core (7/02) stranded security cable
- Additional master controllers and expansion units available for use as repeaters on larger sites
- Optional boxed PSUs c/w with space for a 12V VRLA battery available for sites where a standby battery facility is required
cility is required.
- 2 key nurse call button: Call & Cancel
- 100% Waterproof
- Different silicon printing for different usage:
EC-200CX: Red silicon for patients to call nurses
EC-200NX: Green silicon for nurses to inform Nurse Center they have attended
EC-200AX: Yellow silicon for nurses to call Nurse Center for help
EC-200CB: Blue silicon for Code Blue (emergency calling) - White durable ABS enclosure
- Built-in antenna
- Installation: Wall-mounted / Stick on any surface
- Dual red LEDs and triangular diffuser make it highly visible from a distance.
- Can also be used as an ‘area indicator’ at corridor junctions, staff workstations, etc.
- Finished in tough, durable ABS plastic.
- Also available as part of the NC951 Accessible Toilet Alarm kit.
- Stainless steel version also available.
- Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device.
- Indicates Standard calls via a constant tone/constant red light and Emergency calls via a pulsing tone/pulsing red light.
- Mounts on a standard UK 25mm single gang flush or surface back box.
- A short 1.8m tail call lead for use with C-TEC’s Quantec and 800 Series Call Systems.
- Allows users to remotely generate Standard calls from armchairs, beds, etc.
- Comprises a pear-shaped call push, 1.8m (6ft) trailing lead and a 6.35mm remote jack plug.
- Easily connects to the 6.35mm remote socket on compatible Quantec and 800 Series call points.
- Activating the pear push or removing the tail call lead from a call point’s remote socket will generate a Standard call.
- An attractively designed button-operated call/reset point capable of generating Standard calls on an 800 Series Call System.
- Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
- Red reassurance LED confirms a call has been made.
- Onboard reset button cancels calls made from the NC802DB and standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
- Mounts on a standard UK 25mm single gang flush or surface back box.
- Easy to press big red call button
- Green button to reset
- Call reassurance LED
- Comes with lanyard clip and plastic wall-mounted bracket for storage
- Can be used to generate a standard call on an 800 Series Conventional Call System.
- Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be canceled.
- Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
- Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
- Surface mountable.
- Base fits 16mm conduit and BESA centres.
- 2 key nurse call button with pull cord: Call: Press big red call button or Pull the cord; Cancel: Press the small red cancel button
- 100% Waterproof
- With 2 meters pull cord & triangle pull ring for easy pull
- White durable ABS enclosure
- Built-in antenna
- Installation : Wall-mounted / Stick on any surface
- 2 key nurse call button with patient handset: Call: Press the big red call button on the panel or big red call button on the patient handset; Cancel: Press small red cancel button on the panel or small red cancel button on the patient handset
- 100% Waterproof
- With 1-meter spiral telephone cable & handset for easy press
- White durable ABS enclosure
- Built-in antenna
- Wall-mounted / Stick on any surface
- Display 3 groups of 3-digit numbers from 000 to 999 with the “AbCdEF” letter
- Display current time when it is on standby
- Works with 400pcs of call buttons (Max)
- Show last 32 calls – rolling until the call is canceled
- Can cancel callings via remote controls, 32pcs remote controls in max
- Indicate the service type by dots:1 indicator dot: call; 2 indicator dots: order; 3 indicator dots: bill
- Adjustable ringtone and volume
- Desktop-type / Wall-mounted type receiver
C-Tec 20 Zone Master Call Control Panel NC920S
C-Tec 20 Zone Master Call Control Panel NC920S
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
Double Pole Relay S/E60/A 12VDC
Double Pole Relay S/E60/A 12VDC
The S/E60/A 12VDC Coil Relay is a relay interface designed to connect HARK assistance alarm systems to external equipment. It provides a convenient switching interface for systems such as BMS, fire alarms, intruder alarms and paging transmitters.
N/HARK/1/PSU HARK Power Supply Unit
N/HARK/1/PSU HARK Power Supply Unit
The HARK N/HARK/1/PSU Power Supply Unit is a 12V power supply component designed for the HARK Disabled Toilet Alarm System. It provides the required power for the HARK assistance alarm system and works with the overdoor indicator/sounder to provide audible and visual indication when an emergency call is activated.
HARK Push Button N/HARK/1/PB
HARK Push Button N/HARK/1/PB
The HARK N/HARK/1/PB Push Button is an emergency assistance button designed for use with the HARK Disabled Toilet Alarm System. It provides an alternative to a hanging pull cord, allowing a user in distress to activate the assistance alarm by pressing the button.
HARK Reset Unit N/HARK/1/RS
HARK Reset Unit N/HARK/1/RS
The HARK N/HARK/1/RS Reset Unit is designed for the HARK Disabled Toilet Alarm System, allowing an activated emergency call to be quickly reset. When a call is triggered, the reset switch illuminates and its internal sounder provides audible reassurance. The switch also features a Braille legend for accessibility.
HARK Pull Cord N/HARK/1/PC
HARK Pull Cord N/HARK/1/PC
The HARK N/HARK/1/PC Pull Cord is a 12V emergency pull-cord unit designed for HARK disabled toilet and assistance alarm systems. Pulling the cord activates the emergency call, provides visual reassurance, and triggers the connected reset and indicator/sounder units.
Channel B/12V/2.8AH/SLA Batt 2.8Ah 12V
Channel B/12V/2.8AH/SLA Batt 2.8Ah 12V
Channel B/12V/2.8AH/SLA is a 12V 2.8Ah Sealed Lead Acid (SLA) rechargeable battery designed for reliable standby power in fire alarm, security, emergency lighting and other backup systems.
C-TEC EMERGENCY INDICATOR PANEL 20 ZONE NC822KE
C-TEC EMERGENCY INDICATOR PANEL 20 ZONE NC822KE
The NC812KE, NC822KE and NC832KE indicator panels are fully compatible with all 800 Series call points, ceiling pulls, infrared ceiling receivers, monitoring points, overdoor lights and remote sounders.
Depending on the devices wired to it, standard and emergency calls can be indicated via its buzzer and zonal LEDs. An optional mute button is also provided to allow the user to silence standard calls.
Standard Calls: When triggered by a calling device, the indicator panel’s internal buzzer sounds continuously and the relevant zone indicator(s) illuminate steadily.
Pressing the Indicator Panel’s Mute Button, if fitted, silences the Panel’s internal buzzer. However, if a new call (standard or emergency) is triggered anywhere on the system, the buzzer will resound.
Emergency Calls: When triggered by a calling device, the Indicator Panel’s internal buzzer pulses and the relevant zone indicator(s) flash. This level of call takes priority over standard calls and cannot be muted at the panel. An emergency call can only be reset at the device from which it was triggered or via a reset point wired on the same zone.
C-Tec N/CC/910s 10 Zone Expansion Unit
C-Tec N/CC/910s 10 Zone Expansion Unit
The C-TEC NC910ES 10-Zone Expansion Unit is a surface-mounted expansion module designed to extend the zoning capacity of NC910S and NC920S Call Controllers. It provides 10 additional zones, with individual LED indicators for standard and emergency calls. The unit uses the master controller for audible alarm indication and features a convenient slide-in labelling system for clear zone identification.
N/HARK/1 HARK Disabled Toilet alarm Kit
N/HARK/1 HARK Disabled Toilet alarm Kit
includes a pull cord unit, reset point and power supply / indicator.
• Sounder within the reset unit to give audible reassurance that assistance is on the way
• Braille text on the reset unit
• Only 3 points to install on a standard system
• Can be simply linked to other systems
• Assists in ensuring compliance with the DDA BS8300 & other care standards
• Simple to expand
• Multi-way remote indicator units available
• Twin pull cord rings supplied
• Disabled Persons sticker supplied
C-tec Overdoor Light with Sounder NC806CS
C-tec Overdoor Light with Sounder NC806CS
NC805C/6 Pear Push Extension Call Lead – 2m
NC805C/6 Pear Push Extension Call Lead – 2m
N/C/802DB Standard Call Point With Button Reset And Remote Socket
N/C/802DB Standard Call Point With Button Reset And Remote Socket
Wireless Patient Handset Call Cord With Bed Head Call & Cancel Function
Wireless Patient Handset Call Cord With Bed Head Call & Cancel Function
Wireless Call Button With Emergency Pull Cord
Wireless Call Button With Emergency Pull Cord
Placed on the wall in patients’ room or Toilet for emergency calls. It is easy to be caught in emergency situations.
| Working frequency | 433MHZ |
| Power | 12 V 23 A Battery |
| Battery life | Appro. calling 40,000 times |
| Package | 2 pcs per box |
| Transmission distance | 300 m (open area) |
| Size | 85 x 85 x 15mm (Panel) |
C-TEC Nursecall Ceiling Pull Unit NC807C
Nursecall Ceiling Pull Unit
Nurse Call Button with Pull Cord EC-220PT
Nurse Call Button
Nurse Call Button with Patient Handset EC-220PH
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall Wireless Receiver CT-R330
Nursecall Wireless Receiver CT-R330
