- Key Features
- Compatible with C-TEC’s entire range of 800 Series field devices
- Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm
- Two call levels – standard (constant tone) and emergency (intermittent tone)
- Optional mute and call accept/reset buttons
- ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used)
- Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call
- Innovative slide-in labelling system
- Zones can be wired in 4 or 6 core (7/02) stranded security cable
- Additional master controllers and expansion units available for use as repeaters on larger sites
- Optional boxed PSUs c/w with space for a 12V VRLA battery available for sites where a standby battery facility is required
cility is required.
- 2 key nurse call button: Call & Cancel
- 100% Waterproof
- Different silicon printing for different usage:
EC-200CX: Red silicon for patients to call nurses
EC-200NX: Green silicon for nurses to inform Nurse Center they have attended
EC-200AX: Yellow silicon for nurses to call Nurse Center for help
EC-200CB: Blue silicon for Code Blue (emergency calling) - White durable ABS enclosure
- Built-in antenna
- Installation: Wall-mounted / Stick on any surface
- Can be used to generate a standard call on an 800 Series Conventional Call System.
- Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be canceled.
- Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
- Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
- Surface mountable.
- Base fits 16mm conduit and BESA centres.
- 2 key nurse call button with pull cord: Call: Press big red call button or Pull the cord; Cancel: Press the small red cancel button
- 100% Waterproof
- With 2 meters pull cord & triangle pull ring for easy pull
- White durable ABS enclosure
- Built-in antenna
- Installation : Wall-mounted / Stick on any surface
- 2 key nurse call button with patient handset: Call: Press the big red call button on the panel or big red call button on the patient handset; Cancel: Press small red cancel button on the panel or small red cancel button on the patient handset
- 100% Waterproof
- With 1-meter spiral telephone cable & handset for easy press
- White durable ABS enclosure
- Built-in antenna
- Wall-mounted / Stick on any surface
- Display 3 groups of 3-digit numbers from 000 to 999 with the “AbCdEF” letter
- Display current time when it is on standby
- Works with 400pcs of call buttons (Max)
- Show last 32 calls – rolling until the call is canceled
- Can cancel callings via remote controls, 32pcs remote controls in max
- Indicate the service type by dots:1 indicator dot: call; 2 indicator dots: order; 3 indicator dots: bill
- Adjustable ringtone and volume
- Desktop-type / Wall-mounted type receiver
- Boosting all signals from the call button to the receiver
- Multi Signal repeaters can work together in one place, no interfere
- Extends transmission distance (open area: up to 2km)
- Easy installation – plug & play
KSh75,000.00 Excl. VAT
C-Tec 20 Zone Master Call Control Panel NC920S
SKU: N/AC-Tec 20 Zone Master Call Control Panel NC920S
KSh2,500.00 Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
SKU: N/AVisit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
KSh73,000.00 Excl. VAT
C-TEC EMERGENCY INDICATOR PANEL 20 ZONE NC822KE
SKU: N/AC-TEC EMERGENCY INDICATOR PANEL 20 ZONE NC822KE
The NC812KE, NC822KE and NC832KE indicator panels are fully compatible with all 800 Series call points, ceiling pulls, infrared ceiling receivers, monitoring points, overdoor lights and remote sounders.
Depending on the devices wired to it, standard and emergency calls can be indicated via its buzzer and zonal LEDs. An optional mute button is also provided to allow the user to silence standard calls.
Standard Calls: When triggered by a calling device, the indicator panel’s internal buzzer sounds continuously and the relevant zone indicator(s) illuminate steadily.
Pressing the Indicator Panel’s Mute Button, if fitted, silences the Panel’s internal buzzer. However, if a new call (standard or emergency) is triggered anywhere on the system, the buzzer will resound.
Emergency Calls: When triggered by a calling device, the Indicator Panel’s internal buzzer pulses and the relevant zone indicator(s) flash. This level of call takes priority over standard calls and cannot be muted at the panel. An emergency call can only be reset at the device from which it was triggered or via a reset point wired on the same zone.
KSh65,000.00 Excl. VAT
C-Tec NC920ES 20 Zone Expansion Unit
SKU: N/AC-Tec NC920ES 20 Zone Expansion Unit
he NC920ES expands the number of zones on an NC910S or NC920S Call Controller by 10 or 20 zones (dependent on model purchased). It is housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm.
KSh8,500.00 Excl. VAT
C-TEC Nursecall Ceiling Pull Unit NC807C
SKU: N/ANursecall Ceiling Pull Unit
KSh6,500.00 Excl. VAT
Nurse Call Button with Pull Cord EC-220PT
SKU: N/ANurse Call Button
KSh3,500.00 Nurse Call Button with Patient Handset EC-220PH
SKU: N/AVisit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
KSh25,000.00 Excl. VAT
Nursecall Wireless Receiver CT-R330
SKU: N/ANursecall Wireless Receiver CT-R330
KSh10,500.00 Excl. VAT
Nursecall Signal Repeater EC-900S
SKU: N/ANursecall Signal Repeater
- Key Features
- Compatible with C-TEC’s entire range of 800 Series field devices
- Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm
- Two call levels – standard (constant tone) and emergency (intermittent tone)
- Optional mute and call accept/reset buttons
- ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used)
- Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call
- Innovative slide-in labelling system
- Zones can be wired in 4 or 6 core (7/02) stranded security cable
- Additional master controllers and expansion units available for use as repeaters on larger sites
- Optional boxed PSUs c/w with space for a 12V VRLA battery available for sites where a standby battery facility is required
cility is required.
- 2 key nurse call button: Call & Cancel
- 100% Waterproof
- Different silicon printing for different usage:
EC-200CX: Red silicon for patients to call nurses
EC-200NX: Green silicon for nurses to inform Nurse Center they have attended
EC-200AX: Yellow silicon for nurses to call Nurse Center for help
EC-200CB: Blue silicon for Code Blue (emergency calling) - White durable ABS enclosure
- Built-in antenna
- Installation: Wall-mounted / Stick on any surface
- Can be used to generate a standard call on an 800 Series Conventional Call System.
- Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be canceled.
- Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
- Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
- Surface mountable.
- Base fits 16mm conduit and BESA centres.
- 2 key nurse call button with pull cord: Call: Press big red call button or Pull the cord; Cancel: Press the small red cancel button
- 100% Waterproof
- With 2 meters pull cord & triangle pull ring for easy pull
- White durable ABS enclosure
- Built-in antenna
- Installation : Wall-mounted / Stick on any surface
- 2 key nurse call button with patient handset: Call: Press the big red call button on the panel or big red call button on the patient handset; Cancel: Press small red cancel button on the panel or small red cancel button on the patient handset
- 100% Waterproof
- With 1-meter spiral telephone cable & handset for easy press
- White durable ABS enclosure
- Built-in antenna
- Wall-mounted / Stick on any surface
- Display 3 groups of 3-digit numbers from 000 to 999 with the “AbCdEF” letter
- Display current time when it is on standby
- Works with 400pcs of call buttons (Max)
- Show last 32 calls – rolling until the call is canceled
- Can cancel callings via remote controls, 32pcs remote controls in max
- Indicate the service type by dots:1 indicator dot: call; 2 indicator dots: order; 3 indicator dots: bill
- Adjustable ringtone and volume
- Desktop-type / Wall-mounted type receiver
- Boosting all signals from the call button to the receiver
- Multi Signal repeaters can work together in one place, no interfere
- Extends transmission distance (open area: up to 2km)
- Easy installation – plug & play
C-Tec 20 Zone Master Call Control Panel NC920S
C-Tec 20 Zone Master Call Control Panel NC920S
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
C-TEC EMERGENCY INDICATOR PANEL 20 ZONE NC822KE
C-TEC EMERGENCY INDICATOR PANEL 20 ZONE NC822KE
The NC812KE, NC822KE and NC832KE indicator panels are fully compatible with all 800 Series call points, ceiling pulls, infrared ceiling receivers, monitoring points, overdoor lights and remote sounders.
Depending on the devices wired to it, standard and emergency calls can be indicated via its buzzer and zonal LEDs. An optional mute button is also provided to allow the user to silence standard calls.
Standard Calls: When triggered by a calling device, the indicator panel’s internal buzzer sounds continuously and the relevant zone indicator(s) illuminate steadily.
Pressing the Indicator Panel’s Mute Button, if fitted, silences the Panel’s internal buzzer. However, if a new call (standard or emergency) is triggered anywhere on the system, the buzzer will resound.
Emergency Calls: When triggered by a calling device, the Indicator Panel’s internal buzzer pulses and the relevant zone indicator(s) flash. This level of call takes priority over standard calls and cannot be muted at the panel. An emergency call can only be reset at the device from which it was triggered or via a reset point wired on the same zone.
C-Tec NC920ES 20 Zone Expansion Unit
C-Tec NC920ES 20 Zone Expansion Unit
he NC920ES expands the number of zones on an NC910S or NC920S Call Controller by 10 or 20 zones (dependent on model purchased). It is housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm.
C-TEC Nursecall Ceiling Pull Unit NC807C
Nursecall Ceiling Pull Unit
Nurse Call Button with Pull Cord EC-220PT
Nurse Call Button
Nurse Call Button with Patient Handset EC-220PH
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall Wireless Receiver CT-R330
Nursecall Wireless Receiver CT-R330
Nursecall Signal Repeater EC-900S
Nursecall Signal Repeater
- Key Features
- Compatible with C-TEC’s entire range of 800 Series field devices
- Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm
- Two call levels – standard (constant tone) and emergency (intermittent tone)
- Optional mute and call accept/reset buttons
- ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used)
- Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call
- Innovative slide-in labelling system
- Zones can be wired in 4 or 6 core (7/02) stranded security cable
- Additional master controllers and expansion units available for use as repeaters on larger sites
- Optional boxed PSUs c/w with space for a 12V VRLA battery available for sites where a standby battery facility is required
cility is required.
- 2 key nurse call button: Call & Cancel
- 100% Waterproof
- Different silicon printing for different usage:
EC-200CX: Red silicon for patients to call nurses
EC-200NX: Green silicon for nurses to inform Nurse Center they have attended
EC-200AX: Yellow silicon for nurses to call Nurse Center for help
EC-200CB: Blue silicon for Code Blue (emergency calling) - White durable ABS enclosure
- Built-in antenna
- Installation: Wall-mounted / Stick on any surface
- Can be used to generate a standard call on an 800 Series Conventional Call System.
- Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be canceled.
- Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
- Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
- Surface mountable.
- Base fits 16mm conduit and BESA centres.
- 2 key nurse call button with pull cord: Call: Press big red call button or Pull the cord; Cancel: Press the small red cancel button
- 100% Waterproof
- With 2 meters pull cord & triangle pull ring for easy pull
- White durable ABS enclosure
- Built-in antenna
- Installation : Wall-mounted / Stick on any surface
- 2 key nurse call button with patient handset: Call: Press the big red call button on the panel or big red call button on the patient handset; Cancel: Press small red cancel button on the panel or small red cancel button on the patient handset
- 100% Waterproof
- With 1-meter spiral telephone cable & handset for easy press
- White durable ABS enclosure
- Built-in antenna
- Wall-mounted / Stick on any surface
- Display 3 groups of 3-digit numbers from 000 to 999 with the “AbCdEF” letter
- Display current time when it is on standby
- Works with 400pcs of call buttons (Max)
- Show last 32 calls – rolling until the call is canceled
- Can cancel callings via remote controls, 32pcs remote controls in max
- Indicate the service type by dots:1 indicator dot: call; 2 indicator dots: order; 3 indicator dots: bill
- Adjustable ringtone and volume
- Desktop-type / Wall-mounted type receiver
- Boosting all signals from the call button to the receiver
- Multi Signal repeaters can work together in one place, no interfere
- Extends transmission distance (open area: up to 2km)
- Easy installation – plug & play
C-Tec 20 Zone Master Call Control Panel NC920S
C-Tec 20 Zone Master Call Control Panel NC920S
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
C-TEC EMERGENCY INDICATOR PANEL 20 ZONE NC822KE
C-TEC EMERGENCY INDICATOR PANEL 20 ZONE NC822KE
The NC812KE, NC822KE and NC832KE indicator panels are fully compatible with all 800 Series call points, ceiling pulls, infrared ceiling receivers, monitoring points, overdoor lights and remote sounders.
Depending on the devices wired to it, standard and emergency calls can be indicated via its buzzer and zonal LEDs. An optional mute button is also provided to allow the user to silence standard calls.
Standard Calls: When triggered by a calling device, the indicator panel’s internal buzzer sounds continuously and the relevant zone indicator(s) illuminate steadily.
Pressing the Indicator Panel’s Mute Button, if fitted, silences the Panel’s internal buzzer. However, if a new call (standard or emergency) is triggered anywhere on the system, the buzzer will resound.
Emergency Calls: When triggered by a calling device, the Indicator Panel’s internal buzzer pulses and the relevant zone indicator(s) flash. This level of call takes priority over standard calls and cannot be muted at the panel. An emergency call can only be reset at the device from which it was triggered or via a reset point wired on the same zone.
C-Tec NC920ES 20 Zone Expansion Unit
C-Tec NC920ES 20 Zone Expansion Unit
he NC920ES expands the number of zones on an NC910S or NC920S Call Controller by 10 or 20 zones (dependent on model purchased). It is housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm.
C-TEC Nursecall Ceiling Pull Unit NC807C
Nursecall Ceiling Pull Unit
Nurse Call Button with Pull Cord EC-220PT
Nurse Call Button
Nurse Call Button with Patient Handset EC-220PH
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall Wireless Receiver CT-R330
Nursecall Wireless Receiver CT-R330
Nursecall Signal Repeater EC-900S
Nursecall Signal Repeater
- Key Features
- Compatible with C-TEC’s entire range of 800 Series field devices
- Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm
- Two call levels – standard (constant tone) and emergency (intermittent tone)
- Optional mute and call accept/reset buttons
- ‘Call Accept’ functionality allows staff to send an intermittent call acknowledgment signal to calling zones to confirm help is on the way (dependent on wiring and field devices used)
- Includes a 12V 300mA PSU and 2 volt-free relay contacts which activate on a standard or emergency call
- Innovative slide-in labelling system
- Zones can be wired in 4 or 6 core (7/02) stranded security cable
- Additional master controllers and expansion units available for use as repeaters on larger sites
- Optional boxed PSUs c/w with space for a 12V VRLA battery available for sites where a standby battery facility is required
cility is required.
- 2 key nurse call button: Call & Cancel
- 100% Waterproof
- Different silicon printing for different usage:
EC-200CX: Red silicon for patients to call nurses
EC-200NX: Green silicon for nurses to inform Nurse Center they have attended
EC-200AX: Yellow silicon for nurses to call Nurse Center for help
EC-200CB: Blue silicon for Code Blue (emergency calling) - White durable ABS enclosure
- Built-in antenna
- Installation: Wall-mounted / Stick on any surface
- Can be used to generate a standard call on an 800 Series Conventional Call System.
- Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be canceled.
- Supplied with 3m of red nylon pull cord and two red open-sided triangular bangles for ease of use by the infirm.
- Red confidence LED and diffuser emits a bright red glow over a wide area to reassure the user that a call has been made.
- Surface mountable.
- Base fits 16mm conduit and BESA centres.
- 2 key nurse call button with pull cord: Call: Press big red call button or Pull the cord; Cancel: Press the small red cancel button
- 100% Waterproof
- With 2 meters pull cord & triangle pull ring for easy pull
- White durable ABS enclosure
- Built-in antenna
- Installation : Wall-mounted / Stick on any surface
- 2 key nurse call button with patient handset: Call: Press the big red call button on the panel or big red call button on the patient handset; Cancel: Press small red cancel button on the panel or small red cancel button on the patient handset
- 100% Waterproof
- With 1-meter spiral telephone cable & handset for easy press
- White durable ABS enclosure
- Built-in antenna
- Wall-mounted / Stick on any surface
- Display 3 groups of 3-digit numbers from 000 to 999 with the “AbCdEF” letter
- Display current time when it is on standby
- Works with 400pcs of call buttons (Max)
- Show last 32 calls – rolling until the call is canceled
- Can cancel callings via remote controls, 32pcs remote controls in max
- Indicate the service type by dots:1 indicator dot: call; 2 indicator dots: order; 3 indicator dots: bill
- Adjustable ringtone and volume
- Desktop-type / Wall-mounted type receiver
- Boosting all signals from the call button to the receiver
- Multi Signal repeaters can work together in one place, no interfere
- Extends transmission distance (open area: up to 2km)
- Easy installation – plug & play
C-Tec 20 Zone Master Call Control Panel NC920S
C-Tec 20 Zone Master Call Control Panel NC920S
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall 2-Key Nurse Call Button EC-200CX/EC-200AX/EC-200NX/EC-200CB
C-TEC EMERGENCY INDICATOR PANEL 20 ZONE NC822KE
C-TEC EMERGENCY INDICATOR PANEL 20 ZONE NC822KE
The NC812KE, NC822KE and NC832KE indicator panels are fully compatible with all 800 Series call points, ceiling pulls, infrared ceiling receivers, monitoring points, overdoor lights and remote sounders.
Depending on the devices wired to it, standard and emergency calls can be indicated via its buzzer and zonal LEDs. An optional mute button is also provided to allow the user to silence standard calls.
Standard Calls: When triggered by a calling device, the indicator panel’s internal buzzer sounds continuously and the relevant zone indicator(s) illuminate steadily.
Pressing the Indicator Panel’s Mute Button, if fitted, silences the Panel’s internal buzzer. However, if a new call (standard or emergency) is triggered anywhere on the system, the buzzer will resound.
Emergency Calls: When triggered by a calling device, the Indicator Panel’s internal buzzer pulses and the relevant zone indicator(s) flash. This level of call takes priority over standard calls and cannot be muted at the panel. An emergency call can only be reset at the device from which it was triggered or via a reset point wired on the same zone.
C-Tec NC920ES 20 Zone Expansion Unit
C-Tec NC920ES 20 Zone Expansion Unit
he NC920ES expands the number of zones on an NC910S or NC920S Call Controller by 10 or 20 zones (dependent on model purchased). It is housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm.
C-TEC Nursecall Ceiling Pull Unit NC807C
Nursecall Ceiling Pull Unit
Nurse Call Button with Pull Cord EC-220PT
Nurse Call Button
Nurse Call Button with Patient Handset EC-220PH
Visit our shop today (Informed Systems Limited, Uniview Distributors)at Kamae road, off Luthuli Ave, or contact @0745765503.
Nursecall Wireless Receiver CT-R330
Nursecall Wireless Receiver CT-R330
