MK TV GUARD VOLTAGE PROTECTION
Availability:In Stock!
MK TV GUARD VOLTAGE PROTECTION
- High Voltage disconnect
- Low Voltage protection
- Microprocessor control
- Spike/surge protection
- Power back surge protection
- Lightning protection
- Heat resistant hard ABS plastic to withstand overheating
- Safety shuttered sockets
- For all electrical devices
- Both indoor & outdoor
Original price was: KSh1,500.00.KSh1,000.00Current price is: KSh1,000.00. Excl. VAT
Description
MK TV GUARD VOLTAGE PROTECTION
The TV guard is an overvoltage protection device rated at 5 Amps. The TV guard will disconnect if the mains go above the upper limit and re-connect automatically after the supply returning and remaining below the upper limit for the duration of the wait time.
1. Make sure that your load does not exceed the rating of the TV guard which is 5 AMPS. If this is exceeded, the TV guard may be damaged, and the warranty will be void.
2. Plug the TV guard into the mains and plug your appliance into the TV guard.
3. Do not connect more than one appliance to the TV guard.
4. On first switching on, the red LED will indicate and there will be no output while the TV guard monitors the mains. If the mains level is acceptable, the Yellow LED is lit indicating that the TV guard is in wait mode. At the end of the wait time (30 seconds), and if the supply is below the upper limit, the green LED goes on and the load is connected.
5. It is recommended that the TV guard is kept switched on, and the appliance switched on and off as required, to prevent activating the time delay every time the appliance is switched on
There are no reviews yet.