- Frequency – 2 GHz
- Throughput – 150+ Mbps
- Range – 20+ km
- Gain 18 dBi
- Dish Reflector 400 mm
- Plug and Play Installation
-
- Simultaneous Dual-Band Operation
- 5 GHz Band with Speeds of up to 867 Mbps
- 2.4 GHz Band with Speeds of up to 450 Mbps
- Range up to 183 meters (600 feet)
- High-efficiency 4×4 WiFi 6 (802.11ax)
- 5 GHz band (4×4 MU-MIMO and OFDMA) with a 2.4 Gbps throughput rate
- 2.4 GHz band (4×4 MIMO) with 600 Mbps throughput rate
- Powered by 802.3at PoE (PoE injector sold separately)
- IP54-rated water and dust protection for indoor/outdoor mounting versatility
- 900 MHz
- Antenna Gain: 8 dBi
- 24V, 0.5A PoE
-
- Improved Radio Design
- Improved Mounting
- Improved Surge Protection
- Management WiFi Radio/UISP mobile app
- AirOS 8
- 1 x Gigabit Ethernet Port
- 25 dBm Output Power
- 23 dBi Gain
- 5725-5850 MHz Operating Frequency
- 2×2 MIMO Technology
- Point-to-Point Functionality
- Third-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB).
- Compatibility with Apollo’s XP95/Discovery protocol.
- Two independently programmable conventional sounder circuits.
- Two programmable inputs.
- A fault output relay and three programmable relay outputs with voltage free changeover contacts.
- A selection of zone dependency/coincidence functions.
- A day/night (building occupied/unoccupied) function.
- An investigation delay period function.
- Phased evacuation facility.
- An alarm counter that records how many times the panel has been in alarm state.
- Powerful short circuit protected loop drivers, capable of supporting up to 40 loop powered 10mA sounders per loop.
- An integral EN54-4/A2 switch mode power supply.
- Adjustable contamination levels.
- Earth fault monitoring.
- Combined keypad / keyswitch entry to Access Levels 2 and 3.
- 999 event monitoring.
- An intuitive Windows based upload-download PC program.
- Optional flush-mounting bezel and glazed stainless steel enclosure also available.
- Up to eight XFP main panels (any variant) can be connected onto a two-wire RS485 network. Alternatively, up to eight XFP repeaters can be connected to any non-networked main panel.
- Third-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB).
- Compatibility with Apollo’s XP95/Discovery protocol.
- Two independently programmable conventional sounder circuits.
- Two programmable inputs.
- A fault output relay and three programmable relay outputs with voltage free changeover contacts.
- A selection of zone dependency/coincidence functions.
- A day/night (building occupied/unoccupied) function.
- An investigation delay period function.
- Phased evacuation facility.
- An alarm counter that records how many times the panel has been in alarm state.
- Powerful short circuit protected loop drivers, capable of supporting up to 40 loop powered 10mA sounders per loop.
- An integral EN54-4/A2 switch mode power supply.
- Adjustable contamination levels.
- Earth fault monitoring.
- Combined keypad / keyswitch entry to Access Levels 2 and 3.
- 999 event monitoring.
- An intuitive Windows based upload-download PC program.
- Optional flush-mounting bezel and glazed stainless steel enclosure also available.
- Up to eight XFP main panels (any variant) can be connected onto a two-wire RS485 non-redundant network. Alternatively, up to eight XFP repeaters can be connected to any non-networked main panel.
- Asenware Convectional heat detector AW-CTD382 is conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber.
- This detector is designed to provide open area protection and  to be used with most conventional fire alarm panel.
- The conventional rate of rise heat detector uses thermal component to detect the temperature  changing in the environment.
- It has a stable and reliable working performance.
- Two LEDs on each detector provide local 360° visible alarm indication.
- The alarm can be reset only by a momentary power  interruption.
- 12v DCÂ 15W siren.
- 12 DC Strobe light and blue box.
- Uses minimal power.
- Uses a 12 volt DC output.
- Serial Design – different color panels suit different requirements.
- Double color indicator – this product has a double color indication, blue LED display when standby, and green LED display when triggered.
- Non-contact switch induction design with dual-color LED indicator – especially suitable for dark places. The interactive design of light touch response can better prompt users.
- Panel design – 304 stainless steel front panel and indicator light make it looks more elegant and fashionable.
- Application – used for any access control application and is commonly used in offices, banks, department stores, and many more
- Complies with ANSI A156.4 Grade 3
- UL/ULC listed up to 3 hours fire rated
- Fixed-size 3
- Tri-packed for regular, top jamb or parallel arm applications
- Adjustable latch and closing speed
- Standard: Narrow style plate with flush mount
- Dimension of Mounted Switch (L x W x H): 4.13″ x 1.57″ x 0.20″ (105 x 40 x 5mm)
- Switch component needs space at least 7/8″ deep inside the wall
KSh15,700.00 Excl. VAT
Ubiquiti airMAX PowerBeam M5 PBE-M5-300 300mm Bridge
SKU: N/AHigh-Performance airMAX® Bridge
Incorporating a dish reflector design with advanced technology, the Ubiquiti Powerbeam M5 PBE-M5-300
is the latest generation of Ubiquiti Networks® airMAX® CPE for customer locations.
KSh16,200.00 Excl. VAT
Ubiquiti airMAX PowerBeam M2 2.4GHz PBE-M2-400 400mm Bridge
SKU: N/AUbiquiti airMAX PowerBeam M2 2.4GHz PBE-M2-400 400mm Bridge
KSh19,000.00 Excl. VAT
Ubiquiti UAP-AC-LR Long Range UniFi WiFi Wireless Access Point
SKU: N/AUbiquiti UAP-AC-LR Long Range UniFi WiFi Wireless Access Point
KSh16,500.00 Ubiquiti UniFi AP AC Lite Indoor Access Point (UAP-AC-Lite)
SKU: N/AUbiquiti UniFi AP AC Lite Indoor Access Point (UAP-AC-Lite)
The UniFi AC Lite AP features the latest Wi-Fi 802.11ac technology in a refined industrial design and is ideal for cost-effective deployment of high‑performance wireless networks.
KSh30,500.00 Excl. VAT
Ubiquiti U6 LR Networks Access Point WiFi 6 Long-Range
SKU: N/AUbiquiti U6 LR Networks Access Point WiFi 6 Long-Range
KSh18,500.00 Excl. VAT
Ubiquiti NSM365 Networks NanoStation M
SKU: N/AUbiquiti NSM365 Networks NanoStation M
KSh270,000.00 Excl. VAT
NanoStation loco M9 – Wireless Bridge – 10MB LAN, 100MB LAN, AirMax (LOCOM9)
SKU: N/AUbiquiti NanoStation loco M9 – Wireless Bridge – 10MB LAN, 100MB LAN, AirMax (LOCOM9)
KSh16,500.00 Excl. VAT
Ubiquiti LiteBeam 5AC Long-Range Station
SKU: N/AThe Ubiquiti LiteBeam 5AC Long Range is an affordable airMAX AC CPE designed for long-distance links. Reach new customers and still maintain your great ROI.
Features:
KSh11,200.00 Excl. VAT
LBE-5AC-23 – Ubiquiti airMAX LiteBeam 802.11ac 23dBi 5GHz Wireless Broadband CPE
SKU: N/ALBE-5AC-23 – Ubiquiti airMAX LiteBeam 802.11ac 23dBi 5GHz Wireless Broadband CPE is a part of the airMAX family. This CPE is US-locked so operates between 5725 and 5850 MHz, with a 23 dBi antenna
KSh19,200.00 Excl. VAT
D-link Cat 6 Cable Copper outdoor UTP 23 AWG
SKU: N/AD-link Cat 6 Cable Copper outdoor UTP 23 AWG
D-Link Ethernet Cables provide an easier and cost-effective way to create a Local Area Network that supports  Gigabit Ethernet (1000Base-T) standard. The Ethernet Cables are designed to operate at a bandwidth of up to 250 Mhz.
KSh130,000.00 Excl. VAT
Ctec Fire Alarm Control Panel 2 loop Addressable Panel
SKU: 20A12DDS10D0031 072PCtec Fire Alarm Control Panel 2 loop Addressable Panel
KSh92,000.00 Excl. VAT
Ctec 1 Loop Addressable Fire Panel
SKU: N/ACtec 1 Loop Addressable Fire Panel
KSh2,500.00 Excl. VAT
Asenware sounder and flasher
SKU: N/AAsenware sounder and flasher
Asenware AW-CSS2166-5 Conventional Fire Strobe Sounder is a conventional type sound and light alarm, sound and light for short. It is an automatic fire alarm system output devices, mainly through the alarm will sound and flash signal, suggesting that people fire.
By DC 24V electrical signal to the conventional type of sound and light alarms powered, it sounds an alarm buzzer and flashing lights flash issue.
Buy at the Best and Discounted prices in Nairobi kenya
KSh1,200.00 Asenware Convectional heat detector AW-CTD382
SKU: N/A
KSh1,500.00 Excl. VAT
Big Siren Box
SKU: N/ABlue Metal Siren Box, with a capacity of a 15watt siren horn.
KSh18,000.00 Electric Fence Wizord 2 Nemtek Energizer
SKU: N/AElectric Fence Wizord 2 Nemtek Energizer
• 2 Joule output energy (single zone)
• Robust and flexible design for home security
• Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
• Connectable to armed response radio or GSM module
• Lightning and power surge protection
• Intelligent power saving to extend battery life
• Easy-to-use tag included for controlling the energizer
• Powered by 240V mains and includes built-in battery for back-up power
• Built-in gate alarm input to monitor if the gate is open or closed
KSh1,200.00 Excl. VAT
Infrared No Touch Exit Button CA-R002A
SKU: N/AInfrared No Touch Exit Button
KSh22,000.00 Zkteco UF100 WIFI fingerprint time attendance + Free EM card
SKU: N/AZKTECO UF100 is a face & fingerprint time attendance, with 1000 finger-print, 200 faces, and 100,000 log capacity. It can support multiple verification methods, including face, fingerprint, password, RFID, and a combination of them. With the latest hardware platform, Face and Finger algorithm, it offers brand new, UI and user-friendly operation interface to provide good user experience. It supports WiFi by factory default. The administrator can download and check data wirelessly. Besides, it also comes with TCP/IP and USB ports, giving you more communication options.
KSh2,500.00 Access Control Door closer
SKU: N/AAccess Control Door closer
KSh500.00 Narrow Type stainless steel exit button CA-R004D
SKU: N/ANarrow Type stainless steel exit button CA-R004D
- Frequency – 2 GHz
- Throughput – 150+ Mbps
- Range – 20+ km
- Gain 18 dBi
- Dish Reflector 400 mm
- Plug and Play Installation
-
- Simultaneous Dual-Band Operation
- 5 GHz Band with Speeds of up to 867 Mbps
- 2.4 GHz Band with Speeds of up to 450 Mbps
- Range up to 183 meters (600 feet)
- High-efficiency 4×4 WiFi 6 (802.11ax)
- 5 GHz band (4×4 MU-MIMO and OFDMA) with a 2.4 Gbps throughput rate
- 2.4 GHz band (4×4 MIMO) with 600 Mbps throughput rate
- Powered by 802.3at PoE (PoE injector sold separately)
- IP54-rated water and dust protection for indoor/outdoor mounting versatility
- 900 MHz
- Antenna Gain: 8 dBi
- 24V, 0.5A PoE
-
- Improved Radio Design
- Improved Mounting
- Improved Surge Protection
- Management WiFi Radio/UISP mobile app
- AirOS 8
- 1 x Gigabit Ethernet Port
- 25 dBm Output Power
- 23 dBi Gain
- 5725-5850 MHz Operating Frequency
- 2×2 MIMO Technology
- Point-to-Point Functionality
- Third-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB).
- Compatibility with Apollo’s XP95/Discovery protocol.
- Two independently programmable conventional sounder circuits.
- Two programmable inputs.
- A fault output relay and three programmable relay outputs with voltage free changeover contacts.
- A selection of zone dependency/coincidence functions.
- A day/night (building occupied/unoccupied) function.
- An investigation delay period function.
- Phased evacuation facility.
- An alarm counter that records how many times the panel has been in alarm state.
- Powerful short circuit protected loop drivers, capable of supporting up to 40 loop powered 10mA sounders per loop.
- An integral EN54-4/A2 switch mode power supply.
- Adjustable contamination levels.
- Earth fault monitoring.
- Combined keypad / keyswitch entry to Access Levels 2 and 3.
- 999 event monitoring.
- An intuitive Windows based upload-download PC program.
- Optional flush-mounting bezel and glazed stainless steel enclosure also available.
- Up to eight XFP main panels (any variant) can be connected onto a two-wire RS485 network. Alternatively, up to eight XFP repeaters can be connected to any non-networked main panel.
- Third-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB).
- Compatibility with Apollo’s XP95/Discovery protocol.
- Two independently programmable conventional sounder circuits.
- Two programmable inputs.
- A fault output relay and three programmable relay outputs with voltage free changeover contacts.
- A selection of zone dependency/coincidence functions.
- A day/night (building occupied/unoccupied) function.
- An investigation delay period function.
- Phased evacuation facility.
- An alarm counter that records how many times the panel has been in alarm state.
- Powerful short circuit protected loop drivers, capable of supporting up to 40 loop powered 10mA sounders per loop.
- An integral EN54-4/A2 switch mode power supply.
- Adjustable contamination levels.
- Earth fault monitoring.
- Combined keypad / keyswitch entry to Access Levels 2 and 3.
- 999 event monitoring.
- An intuitive Windows based upload-download PC program.
- Optional flush-mounting bezel and glazed stainless steel enclosure also available.
- Up to eight XFP main panels (any variant) can be connected onto a two-wire RS485 non-redundant network. Alternatively, up to eight XFP repeaters can be connected to any non-networked main panel.
- Asenware Convectional heat detector AW-CTD382 is conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber.
- This detector is designed to provide open area protection and  to be used with most conventional fire alarm panel.
- The conventional rate of rise heat detector uses thermal component to detect the temperature  changing in the environment.
- It has a stable and reliable working performance.
- Two LEDs on each detector provide local 360° visible alarm indication.
- The alarm can be reset only by a momentary power  interruption.
- 12v DCÂ 15W siren.
- 12 DC Strobe light and blue box.
- Uses minimal power.
- Uses a 12 volt DC output.
- Serial Design – different color panels suit different requirements.
- Double color indicator – this product has a double color indication, blue LED display when standby, and green LED display when triggered.
- Non-contact switch induction design with dual-color LED indicator – especially suitable for dark places. The interactive design of light touch response can better prompt users.
- Panel design – 304 stainless steel front panel and indicator light make it looks more elegant and fashionable.
- Application – used for any access control application and is commonly used in offices, banks, department stores, and many more
- Complies with ANSI A156.4 Grade 3
- UL/ULC listed up to 3 hours fire rated
- Fixed-size 3
- Tri-packed for regular, top jamb or parallel arm applications
- Adjustable latch and closing speed
- Standard: Narrow style plate with flush mount
- Dimension of Mounted Switch (L x W x H): 4.13″ x 1.57″ x 0.20″ (105 x 40 x 5mm)
- Switch component needs space at least 7/8″ deep inside the wall
Ubiquiti airMAX PowerBeam M5 PBE-M5-300 300mm Bridge
High-Performance airMAX® Bridge
Incorporating a dish reflector design with advanced technology, the Ubiquiti Powerbeam M5 PBE-M5-300
is the latest generation of Ubiquiti Networks® airMAX® CPE for customer locations.
Ubiquiti airMAX PowerBeam M2 2.4GHz PBE-M2-400 400mm Bridge
Ubiquiti airMAX PowerBeam M2 2.4GHz PBE-M2-400 400mm Bridge
Ubiquiti UAP-AC-LR Long Range UniFi WiFi Wireless Access Point
Ubiquiti UAP-AC-LR Long Range UniFi WiFi Wireless Access Point
Ubiquiti UniFi AP AC Lite Indoor Access Point (UAP-AC-Lite)
Ubiquiti UniFi AP AC Lite Indoor Access Point (UAP-AC-Lite)
The UniFi AC Lite AP features the latest Wi-Fi 802.11ac technology in a refined industrial design and is ideal for cost-effective deployment of high‑performance wireless networks.
Ubiquiti U6 LR Networks Access Point WiFi 6 Long-Range
Ubiquiti U6 LR Networks Access Point WiFi 6 Long-Range
Ubiquiti NSM365 Networks NanoStation M
Ubiquiti NSM365 Networks NanoStation M
NanoStation loco M9 – Wireless Bridge – 10MB LAN, 100MB LAN, AirMax (LOCOM9)
Ubiquiti NanoStation loco M9 – Wireless Bridge – 10MB LAN, 100MB LAN, AirMax (LOCOM9)
Ubiquiti LiteBeam 5AC Long-Range Station
The Ubiquiti LiteBeam 5AC Long Range is an affordable airMAX AC CPE designed for long-distance links. Reach new customers and still maintain your great ROI.
Features:
LBE-5AC-23 – Ubiquiti airMAX LiteBeam 802.11ac 23dBi 5GHz Wireless Broadband CPE
LBE-5AC-23 – Ubiquiti airMAX LiteBeam 802.11ac 23dBi 5GHz Wireless Broadband CPE is a part of the airMAX family. This CPE is US-locked so operates between 5725 and 5850 MHz, with a 23 dBi antenna
D-link Cat 6 Cable Copper outdoor UTP 23 AWG
D-link Cat 6 Cable Copper outdoor UTP 23 AWG
D-Link Ethernet Cables provide an easier and cost-effective way to create a Local Area Network that supports  Gigabit Ethernet (1000Base-T) standard. The Ethernet Cables are designed to operate at a bandwidth of up to 250 Mhz.
Ctec Fire Alarm Control Panel 2 loop Addressable Panel
Ctec Fire Alarm Control Panel 2 loop Addressable Panel
Ctec 1 Loop Addressable Fire Panel
Ctec 1 Loop Addressable Fire Panel
Asenware sounder and flasher
Asenware sounder and flasher
Asenware AW-CSS2166-5 Conventional Fire Strobe Sounder is a conventional type sound and light alarm, sound and light for short. It is an automatic fire alarm system output devices, mainly through the alarm will sound and flash signal, suggesting that people fire.
By DC 24V electrical signal to the conventional type of sound and light alarms powered, it sounds an alarm buzzer and flashing lights flash issue.
Buy at the Best and Discounted prices in Nairobi kenya
Asenware Convectional heat detector AW-CTD382
Big Siren Box
Blue Metal Siren Box, with a capacity of a 15watt siren horn.
Electric Fence Wizord 2 Nemtek Energizer
Electric Fence Wizord 2 Nemtek Energizer
• 2 Joule output energy (single zone)
• Robust and flexible design for home security
• Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
• Connectable to armed response radio or GSM module
• Lightning and power surge protection
• Intelligent power saving to extend battery life
• Easy-to-use tag included for controlling the energizer
• Powered by 240V mains and includes built-in battery for back-up power
• Built-in gate alarm input to monitor if the gate is open or closed
Infrared No Touch Exit Button CA-R002A
Infrared No Touch Exit Button
Zkteco UF100 WIFI fingerprint time attendance + Free EM card
ZKTECO UF100 is a face & fingerprint time attendance, with 1000 finger-print, 200 faces, and 100,000 log capacity. It can support multiple verification methods, including face, fingerprint, password, RFID, and a combination of them. With the latest hardware platform, Face and Finger algorithm, it offers brand new, UI and user-friendly operation interface to provide good user experience. It supports WiFi by factory default. The administrator can download and check data wirelessly. Besides, it also comes with TCP/IP and USB ports, giving you more communication options.
Access Control Door closer
Access Control Door closer
Narrow Type stainless steel exit button CA-R004D
Narrow Type stainless steel exit button CA-R004D
- Frequency – 2 GHz
- Throughput – 150+ Mbps
- Range – 20+ km
- Gain 18 dBi
- Dish Reflector 400 mm
- Plug and Play Installation
-
- Simultaneous Dual-Band Operation
- 5 GHz Band with Speeds of up to 867 Mbps
- 2.4 GHz Band with Speeds of up to 450 Mbps
- Range up to 183 meters (600 feet)
- High-efficiency 4×4 WiFi 6 (802.11ax)
- 5 GHz band (4×4 MU-MIMO and OFDMA) with a 2.4 Gbps throughput rate
- 2.4 GHz band (4×4 MIMO) with 600 Mbps throughput rate
- Powered by 802.3at PoE (PoE injector sold separately)
- IP54-rated water and dust protection for indoor/outdoor mounting versatility
- 900 MHz
- Antenna Gain: 8 dBi
- 24V, 0.5A PoE
-
- Improved Radio Design
- Improved Mounting
- Improved Surge Protection
- Management WiFi Radio/UISP mobile app
- AirOS 8
- 1 x Gigabit Ethernet Port
- 25 dBm Output Power
- 23 dBi Gain
- 5725-5850 MHz Operating Frequency
- 2×2 MIMO Technology
- Point-to-Point Functionality
- Third-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB).
- Compatibility with Apollo’s XP95/Discovery protocol.
- Two independently programmable conventional sounder circuits.
- Two programmable inputs.
- A fault output relay and three programmable relay outputs with voltage free changeover contacts.
- A selection of zone dependency/coincidence functions.
- A day/night (building occupied/unoccupied) function.
- An investigation delay period function.
- Phased evacuation facility.
- An alarm counter that records how many times the panel has been in alarm state.
- Powerful short circuit protected loop drivers, capable of supporting up to 40 loop powered 10mA sounders per loop.
- An integral EN54-4/A2 switch mode power supply.
- Adjustable contamination levels.
- Earth fault monitoring.
- Combined keypad / keyswitch entry to Access Levels 2 and 3.
- 999 event monitoring.
- An intuitive Windows based upload-download PC program.
- Optional flush-mounting bezel and glazed stainless steel enclosure also available.
- Up to eight XFP main panels (any variant) can be connected onto a two-wire RS485 network. Alternatively, up to eight XFP repeaters can be connected to any non-networked main panel.
- Third-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB).
- Compatibility with Apollo’s XP95/Discovery protocol.
- Two independently programmable conventional sounder circuits.
- Two programmable inputs.
- A fault output relay and three programmable relay outputs with voltage free changeover contacts.
- A selection of zone dependency/coincidence functions.
- A day/night (building occupied/unoccupied) function.
- An investigation delay period function.
- Phased evacuation facility.
- An alarm counter that records how many times the panel has been in alarm state.
- Powerful short circuit protected loop drivers, capable of supporting up to 40 loop powered 10mA sounders per loop.
- An integral EN54-4/A2 switch mode power supply.
- Adjustable contamination levels.
- Earth fault monitoring.
- Combined keypad / keyswitch entry to Access Levels 2 and 3.
- 999 event monitoring.
- An intuitive Windows based upload-download PC program.
- Optional flush-mounting bezel and glazed stainless steel enclosure also available.
- Up to eight XFP main panels (any variant) can be connected onto a two-wire RS485 non-redundant network. Alternatively, up to eight XFP repeaters can be connected to any non-networked main panel.
- Asenware Convectional heat detector AW-CTD382 is conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber.
- This detector is designed to provide open area protection and  to be used with most conventional fire alarm panel.
- The conventional rate of rise heat detector uses thermal component to detect the temperature  changing in the environment.
- It has a stable and reliable working performance.
- Two LEDs on each detector provide local 360° visible alarm indication.
- The alarm can be reset only by a momentary power  interruption.
- 12v DCÂ 15W siren.
- 12 DC Strobe light and blue box.
- Uses minimal power.
- Uses a 12 volt DC output.
- Serial Design – different color panels suit different requirements.
- Double color indicator – this product has a double color indication, blue LED display when standby, and green LED display when triggered.
- Non-contact switch induction design with dual-color LED indicator – especially suitable for dark places. The interactive design of light touch response can better prompt users.
- Panel design – 304 stainless steel front panel and indicator light make it looks more elegant and fashionable.
- Application – used for any access control application and is commonly used in offices, banks, department stores, and many more
- Complies with ANSI A156.4 Grade 3
- UL/ULC listed up to 3 hours fire rated
- Fixed-size 3
- Tri-packed for regular, top jamb or parallel arm applications
- Adjustable latch and closing speed
- Standard: Narrow style plate with flush mount
- Dimension of Mounted Switch (L x W x H): 4.13″ x 1.57″ x 0.20″ (105 x 40 x 5mm)
- Switch component needs space at least 7/8″ deep inside the wall
Ubiquiti airMAX PowerBeam M5 PBE-M5-300 300mm Bridge
High-Performance airMAX® Bridge
Incorporating a dish reflector design with advanced technology, the Ubiquiti Powerbeam M5 PBE-M5-300
is the latest generation of Ubiquiti Networks® airMAX® CPE for customer locations.
Ubiquiti airMAX PowerBeam M2 2.4GHz PBE-M2-400 400mm Bridge
Ubiquiti airMAX PowerBeam M2 2.4GHz PBE-M2-400 400mm Bridge
Ubiquiti UAP-AC-LR Long Range UniFi WiFi Wireless Access Point
Ubiquiti UAP-AC-LR Long Range UniFi WiFi Wireless Access Point
Ubiquiti UniFi AP AC Lite Indoor Access Point (UAP-AC-Lite)
Ubiquiti UniFi AP AC Lite Indoor Access Point (UAP-AC-Lite)
The UniFi AC Lite AP features the latest Wi-Fi 802.11ac technology in a refined industrial design and is ideal for cost-effective deployment of high‑performance wireless networks.
Ubiquiti U6 LR Networks Access Point WiFi 6 Long-Range
Ubiquiti U6 LR Networks Access Point WiFi 6 Long-Range
Ubiquiti NSM365 Networks NanoStation M
Ubiquiti NSM365 Networks NanoStation M
NanoStation loco M9 – Wireless Bridge – 10MB LAN, 100MB LAN, AirMax (LOCOM9)
Ubiquiti NanoStation loco M9 – Wireless Bridge – 10MB LAN, 100MB LAN, AirMax (LOCOM9)
Ubiquiti LiteBeam 5AC Long-Range Station
The Ubiquiti LiteBeam 5AC Long Range is an affordable airMAX AC CPE designed for long-distance links. Reach new customers and still maintain your great ROI.
Features:
LBE-5AC-23 – Ubiquiti airMAX LiteBeam 802.11ac 23dBi 5GHz Wireless Broadband CPE
LBE-5AC-23 – Ubiquiti airMAX LiteBeam 802.11ac 23dBi 5GHz Wireless Broadband CPE is a part of the airMAX family. This CPE is US-locked so operates between 5725 and 5850 MHz, with a 23 dBi antenna
D-link Cat 6 Cable Copper outdoor UTP 23 AWG
D-link Cat 6 Cable Copper outdoor UTP 23 AWG
D-Link Ethernet Cables provide an easier and cost-effective way to create a Local Area Network that supports  Gigabit Ethernet (1000Base-T) standard. The Ethernet Cables are designed to operate at a bandwidth of up to 250 Mhz.
Ctec Fire Alarm Control Panel 2 loop Addressable Panel
Ctec Fire Alarm Control Panel 2 loop Addressable Panel
Ctec 1 Loop Addressable Fire Panel
Ctec 1 Loop Addressable Fire Panel
Asenware sounder and flasher
Asenware sounder and flasher
Asenware AW-CSS2166-5 Conventional Fire Strobe Sounder is a conventional type sound and light alarm, sound and light for short. It is an automatic fire alarm system output devices, mainly through the alarm will sound and flash signal, suggesting that people fire.
By DC 24V electrical signal to the conventional type of sound and light alarms powered, it sounds an alarm buzzer and flashing lights flash issue.
Buy at the Best and Discounted prices in Nairobi kenya
Asenware Convectional heat detector AW-CTD382
Big Siren Box
Blue Metal Siren Box, with a capacity of a 15watt siren horn.
Electric Fence Wizord 2 Nemtek Energizer
Electric Fence Wizord 2 Nemtek Energizer
• 2 Joule output energy (single zone)
• Robust and flexible design for home security
• Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
• Connectable to armed response radio or GSM module
• Lightning and power surge protection
• Intelligent power saving to extend battery life
• Easy-to-use tag included for controlling the energizer
• Powered by 240V mains and includes built-in battery for back-up power
• Built-in gate alarm input to monitor if the gate is open or closed
Infrared No Touch Exit Button CA-R002A
Infrared No Touch Exit Button
Zkteco UF100 WIFI fingerprint time attendance + Free EM card
ZKTECO UF100 is a face & fingerprint time attendance, with 1000 finger-print, 200 faces, and 100,000 log capacity. It can support multiple verification methods, including face, fingerprint, password, RFID, and a combination of them. With the latest hardware platform, Face and Finger algorithm, it offers brand new, UI and user-friendly operation interface to provide good user experience. It supports WiFi by factory default. The administrator can download and check data wirelessly. Besides, it also comes with TCP/IP and USB ports, giving you more communication options.
Access Control Door closer
Access Control Door closer
Narrow Type stainless steel exit button CA-R004D
Narrow Type stainless steel exit button CA-R004D
- Frequency – 2 GHz
- Throughput – 150+ Mbps
- Range – 20+ km
- Gain 18 dBi
- Dish Reflector 400 mm
- Plug and Play Installation
-
- Simultaneous Dual-Band Operation
- 5 GHz Band with Speeds of up to 867 Mbps
- 2.4 GHz Band with Speeds of up to 450 Mbps
- Range up to 183 meters (600 feet)
- High-efficiency 4×4 WiFi 6 (802.11ax)
- 5 GHz band (4×4 MU-MIMO and OFDMA) with a 2.4 Gbps throughput rate
- 2.4 GHz band (4×4 MIMO) with 600 Mbps throughput rate
- Powered by 802.3at PoE (PoE injector sold separately)
- IP54-rated water and dust protection for indoor/outdoor mounting versatility
- 900 MHz
- Antenna Gain: 8 dBi
- 24V, 0.5A PoE
-
- Improved Radio Design
- Improved Mounting
- Improved Surge Protection
- Management WiFi Radio/UISP mobile app
- AirOS 8
- 1 x Gigabit Ethernet Port
- 25 dBm Output Power
- 23 dBi Gain
- 5725-5850 MHz Operating Frequency
- 2×2 MIMO Technology
- Point-to-Point Functionality
- Third-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB).
- Compatibility with Apollo’s XP95/Discovery protocol.
- Two independently programmable conventional sounder circuits.
- Two programmable inputs.
- A fault output relay and three programmable relay outputs with voltage free changeover contacts.
- A selection of zone dependency/coincidence functions.
- A day/night (building occupied/unoccupied) function.
- An investigation delay period function.
- Phased evacuation facility.
- An alarm counter that records how many times the panel has been in alarm state.
- Powerful short circuit protected loop drivers, capable of supporting up to 40 loop powered 10mA sounders per loop.
- An integral EN54-4/A2 switch mode power supply.
- Adjustable contamination levels.
- Earth fault monitoring.
- Combined keypad / keyswitch entry to Access Levels 2 and 3.
- 999 event monitoring.
- An intuitive Windows based upload-download PC program.
- Optional flush-mounting bezel and glazed stainless steel enclosure also available.
- Up to eight XFP main panels (any variant) can be connected onto a two-wire RS485 network. Alternatively, up to eight XFP repeaters can be connected to any non-networked main panel.
- Third-party certified to EN54-2/4 by the Loss Prevention Certification Board (LPCB).
- Compatibility with Apollo’s XP95/Discovery protocol.
- Two independently programmable conventional sounder circuits.
- Two programmable inputs.
- A fault output relay and three programmable relay outputs with voltage free changeover contacts.
- A selection of zone dependency/coincidence functions.
- A day/night (building occupied/unoccupied) function.
- An investigation delay period function.
- Phased evacuation facility.
- An alarm counter that records how many times the panel has been in alarm state.
- Powerful short circuit protected loop drivers, capable of supporting up to 40 loop powered 10mA sounders per loop.
- An integral EN54-4/A2 switch mode power supply.
- Adjustable contamination levels.
- Earth fault monitoring.
- Combined keypad / keyswitch entry to Access Levels 2 and 3.
- 999 event monitoring.
- An intuitive Windows based upload-download PC program.
- Optional flush-mounting bezel and glazed stainless steel enclosure also available.
- Up to eight XFP main panels (any variant) can be connected onto a two-wire RS485 non-redundant network. Alternatively, up to eight XFP repeaters can be connected to any non-networked main panel.
- Asenware Convectional heat detector AW-CTD382 is conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber.
- This detector is designed to provide open area protection and  to be used with most conventional fire alarm panel.
- The conventional rate of rise heat detector uses thermal component to detect the temperature  changing in the environment.
- It has a stable and reliable working performance.
- Two LEDs on each detector provide local 360° visible alarm indication.
- The alarm can be reset only by a momentary power  interruption.
- 12v DCÂ 15W siren.
- 12 DC Strobe light and blue box.
- Uses minimal power.
- Uses a 12 volt DC output.
- Serial Design – different color panels suit different requirements.
- Double color indicator – this product has a double color indication, blue LED display when standby, and green LED display when triggered.
- Non-contact switch induction design with dual-color LED indicator – especially suitable for dark places. The interactive design of light touch response can better prompt users.
- Panel design – 304 stainless steel front panel and indicator light make it looks more elegant and fashionable.
- Application – used for any access control application and is commonly used in offices, banks, department stores, and many more
- Complies with ANSI A156.4 Grade 3
- UL/ULC listed up to 3 hours fire rated
- Fixed-size 3
- Tri-packed for regular, top jamb or parallel arm applications
- Adjustable latch and closing speed
- Standard: Narrow style plate with flush mount
- Dimension of Mounted Switch (L x W x H): 4.13″ x 1.57″ x 0.20″ (105 x 40 x 5mm)
- Switch component needs space at least 7/8″ deep inside the wall
Ubiquiti airMAX PowerBeam M5 PBE-M5-300 300mm Bridge
High-Performance airMAX® Bridge
Incorporating a dish reflector design with advanced technology, the Ubiquiti Powerbeam M5 PBE-M5-300
is the latest generation of Ubiquiti Networks® airMAX® CPE for customer locations.
Ubiquiti airMAX PowerBeam M2 2.4GHz PBE-M2-400 400mm Bridge
Ubiquiti airMAX PowerBeam M2 2.4GHz PBE-M2-400 400mm Bridge
Ubiquiti UAP-AC-LR Long Range UniFi WiFi Wireless Access Point
Ubiquiti UAP-AC-LR Long Range UniFi WiFi Wireless Access Point
Ubiquiti UniFi AP AC Lite Indoor Access Point (UAP-AC-Lite)
Ubiquiti UniFi AP AC Lite Indoor Access Point (UAP-AC-Lite)
The UniFi AC Lite AP features the latest Wi-Fi 802.11ac technology in a refined industrial design and is ideal for cost-effective deployment of high‑performance wireless networks.
Ubiquiti U6 LR Networks Access Point WiFi 6 Long-Range
Ubiquiti U6 LR Networks Access Point WiFi 6 Long-Range
Ubiquiti NSM365 Networks NanoStation M
Ubiquiti NSM365 Networks NanoStation M
NanoStation loco M9 – Wireless Bridge – 10MB LAN, 100MB LAN, AirMax (LOCOM9)
Ubiquiti NanoStation loco M9 – Wireless Bridge – 10MB LAN, 100MB LAN, AirMax (LOCOM9)
Ubiquiti LiteBeam 5AC Long-Range Station
The Ubiquiti LiteBeam 5AC Long Range is an affordable airMAX AC CPE designed for long-distance links. Reach new customers and still maintain your great ROI.
Features:
LBE-5AC-23 – Ubiquiti airMAX LiteBeam 802.11ac 23dBi 5GHz Wireless Broadband CPE
LBE-5AC-23 – Ubiquiti airMAX LiteBeam 802.11ac 23dBi 5GHz Wireless Broadband CPE is a part of the airMAX family. This CPE is US-locked so operates between 5725 and 5850 MHz, with a 23 dBi antenna
D-link Cat 6 Cable Copper outdoor UTP 23 AWG
D-link Cat 6 Cable Copper outdoor UTP 23 AWG
D-Link Ethernet Cables provide an easier and cost-effective way to create a Local Area Network that supports  Gigabit Ethernet (1000Base-T) standard. The Ethernet Cables are designed to operate at a bandwidth of up to 250 Mhz.
Ctec Fire Alarm Control Panel 2 loop Addressable Panel
Ctec Fire Alarm Control Panel 2 loop Addressable Panel
Ctec 1 Loop Addressable Fire Panel
Ctec 1 Loop Addressable Fire Panel
Asenware sounder and flasher
Asenware sounder and flasher
Asenware AW-CSS2166-5 Conventional Fire Strobe Sounder is a conventional type sound and light alarm, sound and light for short. It is an automatic fire alarm system output devices, mainly through the alarm will sound and flash signal, suggesting that people fire.
By DC 24V electrical signal to the conventional type of sound and light alarms powered, it sounds an alarm buzzer and flashing lights flash issue.
Buy at the Best and Discounted prices in Nairobi kenya
Asenware Convectional heat detector AW-CTD382
Big Siren Box
Blue Metal Siren Box, with a capacity of a 15watt siren horn.
Electric Fence Wizord 2 Nemtek Energizer
Electric Fence Wizord 2 Nemtek Energizer
• 2 Joule output energy (single zone)
• Robust and flexible design for home security
• Built-in alarm monitors tampering or faults on the high voltage and earth fence wires
• Connectable to armed response radio or GSM module
• Lightning and power surge protection
• Intelligent power saving to extend battery life
• Easy-to-use tag included for controlling the energizer
• Powered by 240V mains and includes built-in battery for back-up power
• Built-in gate alarm input to monitor if the gate is open or closed
Infrared No Touch Exit Button CA-R002A
Infrared No Touch Exit Button
Zkteco UF100 WIFI fingerprint time attendance + Free EM card
ZKTECO UF100 is a face & fingerprint time attendance, with 1000 finger-print, 200 faces, and 100,000 log capacity. It can support multiple verification methods, including face, fingerprint, password, RFID, and a combination of them. With the latest hardware platform, Face and Finger algorithm, it offers brand new, UI and user-friendly operation interface to provide good user experience. It supports WiFi by factory default. The administrator can download and check data wirelessly. Besides, it also comes with TCP/IP and USB ports, giving you more communication options.
Access Control Door closer
Access Control Door closer
