Availability:In Stock!
Asenware 8 Zone Fire alarm control Panel
The AW-CFP2166 series 8 Zone conventional fire alarm panel is designed based on EN54 part 2＆4 standard. And it is the central part of conventional fire alarm system, designed for applications requiring smoke detectors, bell, manual pull stations, and sprinkler supervision. Each zone can be disabled by a button. The basic unit offers 1 to 8 zones of initiation, up to 16 zones for larger applications.
KSh25,000.00 Excl. VAT
CompareDescription
Asenware 8 Zone Fire alarm control panel
Specification
- It is a modularized design, the panel can expand from 1 zone to 32 zones easily.
- It has 2 level control mode by a lock
- It has 24VDC and 5VDC power supply output.
- It has FIRE and FAULT signal output.
- It has 2 general sounders output.
- Each zone has 1 circuit detector input.
- Each zone can be disabled by a button.
- It has a RESET button to reset the panel.
- It has a SILENCE button to stop BUZZER and SOUNDERS.
- It has EVACUATE button to start a manual fire alarm immediately.
- It has a battery low protection function, when battery voltage lower than 21VDC, the battery will be cut off automatically until the mains power is on.
- It has an optional GSM module for fire alarm by SMS.
Technical parameters
| ITEM | 8Zone panel |
| Model No. | AW-CFP2166-04-16 |
| Mains supply voltage | 110VAC or 240VAC |
| Internal power supply | 27.2VDC |
| Total output current limited | 3A @ 240VAC |
| Batteries (Default Configuration) | 12V2AH*2-24VDC in Total |
| End of Line device | 6.8k Q,5% tolerance, 0.25W (color code-blue, grey, red, gold) |
| End of line resistor value | 6.8k 22,5% tolerance, 0.25W (color code-blue, grey, red, gold) |
| Dimensions(mm) | 395*502″124mm |
| Weight (without batteries) | 7kg |
| Weight (with batteries) | 9.6kg |
There are no reviews yet.