- Product: 4 wire LPG gas detector
- Brand: Asenware
- Model Number: AW-D132C-4W
- Power Consumption: ≤2W @Alarm
- Alarm Horn: ≥ 85dB @3m
- Main Voltage: 24V DC
- Alarm Outputs: DC12V pulse voltage and Relay( COM ,NO )
- Warm Up Time: Approximately 90 Seconds
- Size: 104.5mm* 58mm* 29.1mm
- Weight: About 62g
- Conventional Manual Call Point Appearance
- LED Indicator
- Conventional Manual Call Point Working Environment
- This conventional manual call point is suitable for indoor use, in order to better achieve product performance.
- This conventional manual call point complies with the EN54-11 standard
- Robust design
- Low current consumption
- Easy to install
- Maximum 110dB(A) at 1 metre (dependant on tone selected)
- 32 user-selectable tones
- Third-party certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc =Â 3.8mA.
- IP33C rated.
- Certified to EN54 Parts 11 (LPCB)Â and 13 (BSI).
- ‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
- Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
- Quick visible alarm indication.
- Changeover contacts.
- IP24 rated.
- 8 zones panels
- Flexible, high specification system
- Surface or semi-flush mounting
- Simple “one-shot” auto-reset user test facility
- Maintenance free poly switch circuit protection, with auto reset
- Class change and programmable fire/fault relay as standard
- Quick and simple to install
- Simple two wire connection
- No power supply required
- Quick and simple to install
- Simple two wire connection
- No power supply required
- It is modularized design, the panel can expend from 1 zone to 32 zones easily.
- It has 2 level control mode by a lock
- It has 24VDC and 5VDC power supply output.
- It has FIRE and FAULT signal output.
- It has 2 general sounders output.
- Each zone has 1 circuit detectors input .Each zone can be disable by a button.
- It has RESET button to reset the panel.
- It has SILENCE button to stop BUZZER and SOUNDERS.
- It has EVACUATE button to start a manual fire alarm immediately.
- It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.It
- Â has an optional GSM module for fire alarm by SMS .
- Meet both EN54-3 and EN54 -23.
- Designed with an upper cover and a lower cover and installed on an independent base, it can be installed, debugged and maintained conveniently.
- Suitable for wall and ceiling mount application.
- Providing 16 tones.
- Highly efficient LED technology and specially designed lens.
- Light output synchronization.
- 32 tones (user selectable)
- 12V or 24V
- Secure clip fit base
- Volume control
- Fire approved and Signalling tone options
- For Fire, Security and Signalling
- Quick fitting for easy installation
- Reduce output to suit application
- Quick and simple to install | High sound output
- Low current consumption
- Multi-fixing base plate
- IP42 rated | Can be used for non fire applications
- Â Surface or flush mountable
- · Fast fit clip on front cover
- · Quick & simple to install
- · Single tool for testing and accessing the call point
- no wire connection
- 360° visibility LED using light pipe technology
- Wide range of detector types
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- Low profile design
- 360° viewable LED design
- Removable detector chamber for cleaning
- New enhanced detectors feature Dual LEDs,
- Drift compensation and Chamber monitoring (Optical & Photo-Thermal)
- Flexible high specification system
- Very easy to maintain and service
- Suitable for a large range of projects
- No fuses required
- Maintenance free poly switch circuit protection with auto reset
- Class change and programmable fire/fault relay as standard on 2/4 zone
- Discreet panel design
- Numerical access code (no lock keys)
- Supplied complete with battery for 24 hour standby
- Polycarbonate housing
- Flexible high specification system
- Very easy to maintain and service
- Suitable for a large range of projects
- No fuses required
- Maintenance free poly switch circuit protection with auto reset
- Class change and programmable fire/fault relay as standard on 2/4 zone
- Discreet panel design
- Numerical access code (no lock keys)
- Supplied complete with battery for 24 hour standby
- Polycarbonate housing
- Red Call Point
- 470 Ohm
- No LED
- Resettable plate insert
- Surface mount
- 87 x 87 x 53mm
- MX004: Resettable plate insert replacements (pack of 10)
KSh15,000.00 Excl. VAT
Asenware Conventional LPG Gas Detector AW-D132C-4W 24V DC 4 wire
SKU: N/AAsenware Conventional LPG Gas Detector AW-D132C-4W 24V DC 4 wire
KSh1,200.00 Excl. VAT
Asenware Conventional Manual Call Point AW-D135C
SKU: N/AAsenware Conventional Manual Call Point AW-D135C
KSh1,200.00 Excl. VAT
Asenware Conventional Smoke Detector AW-CSD381
SKU: N/AAsenware Conventional Smoke Detector AW-CSD381
Model No. : AW-CSD381
 Photo-Electric type spot detector
 Built in dual LEDs
 Visible from all around 360°
 Remote indicator output
 Compatible with most brands fire alarm panels.
 LPCB approved.
KSh6,000.00 Excl. VAT
Hochiki Conventional Wall Sounder
SKU: N/AHochiki Conventional Wall Sounder
KSh3,500.00 Excl. VAT
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
SKU: N/ACTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
KSh2,500.00 Excl. VAT
C-Tec Conventional Manual Call Point
SKU: N/AC-Tec Conventional Manual Call Point
KSh50,000.00 Excl. VAT
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
SKU: N/ACooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
KSh120,000.00 Excl. VAT
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
SKU: N/ACooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
KSh105,000.00 Excl. VAT
Cooper Menvier MBD50R Conventional Infra-Red Beam Receiver complete with mounting base – 50m Range
SKU: N/ACooper Menvier MBD50R Conventional Infra-Red Beam Receiver complete with mounting base – 50m Range
KSh37,500.00 Excl. VAT
Asenware AW-CFP2166 16 Zone Conventional Fire Panel
SKU: N/AAsenware AW-CFP2166 16 Zone Conventional Fire Panel
KSh5,500.00 Excl. VAT
AW-D316 CONVENTIONAL SOUNDER BEACON
SKU: N/AAW-D316 CONVENTIONAL SOUNDER BEACON
KSh6,000.00 Excl. VAT
Menvier Conventional combined Fire Alarm Sounder and Strobe Light at 100dB(A) Max at 1m complete with mounting base
SKU: N/AMenvier Conventional combined Fire Alarm Sounder and Strobe Light at 100dB(A) Max at 1m complete with mounting base
KSh4,500.00 Excl. VAT
Menvier Conventional Bell
SKU: N/AMenvier Conventional Bell
KSh2,500.00 Excl. VAT
Menvier Conventional Manual Call Point
SKU: N/AMenvier Conventional Manual Call Point
KSh3,400.00 Excl. VAT
Menvier Conventional Heat Detector with Base
SKU: N/AMenvier Conventional Heat Detector with Base
KSh3,400.00 Excl. VAT
Menvier Conventional Smoke Detector with Base
SKU: N/AMenvier Conventional Smoke Detector with Base
KSh34,000.00 Cooper Menvier Conventional 2 zone Fire Panel
SKU: N/ACooper Menvier Conventional 2 zone Fire Panel
KSh39,000.00 Excl. VAT
Cooper Menvier Conventional 4 zone Fire Panel
SKU: N/ACooper Menvier Conventional 4 zone Fire Panel
KSh4,000.00 Asenware Conventional Fire Strobe Sounder aw-css2166-4
SKU: N/AAsenware Conventional Fire Strobe Sounder aw-css2166-4
Weather-proof conventional fire strobe sounder is powered by a 24v electrical circuit. In the event of a fire, the sounder will sound and flash at the same time. Very stable and reliable; easy to install and wire; can be used in different emergency situations.
KSh1,500.00 Excl. VAT
RESETTABLE FIRE MANUAL CALL POINT RED (CA-A002R)
SKU: 804RESETTABLE FIRE MANUAL CALL POINT RED (CA-A002R)
- Product: 4 wire LPG gas detector
- Brand: Asenware
- Model Number: AW-D132C-4W
- Power Consumption: ≤2W @Alarm
- Alarm Horn: ≥ 85dB @3m
- Main Voltage: 24V DC
- Alarm Outputs: DC12V pulse voltage and Relay( COM ,NO )
- Warm Up Time: Approximately 90 Seconds
- Size: 104.5mm* 58mm* 29.1mm
- Weight: About 62g
- Conventional Manual Call Point Appearance
- LED Indicator
- Conventional Manual Call Point Working Environment
- This conventional manual call point is suitable for indoor use, in order to better achieve product performance.
- This conventional manual call point complies with the EN54-11 standard
- Robust design
- Low current consumption
- Easy to install
- Maximum 110dB(A) at 1 metre (dependant on tone selected)
- 32 user-selectable tones
- Third-party certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc =Â 3.8mA.
- IP33C rated.
- Certified to EN54 Parts 11 (LPCB)Â and 13 (BSI).
- ‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
- Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
- Quick visible alarm indication.
- Changeover contacts.
- IP24 rated.
- 8 zones panels
- Flexible, high specification system
- Surface or semi-flush mounting
- Simple “one-shot” auto-reset user test facility
- Maintenance free poly switch circuit protection, with auto reset
- Class change and programmable fire/fault relay as standard
- Quick and simple to install
- Simple two wire connection
- No power supply required
- Quick and simple to install
- Simple two wire connection
- No power supply required
- It is modularized design, the panel can expend from 1 zone to 32 zones easily.
- It has 2 level control mode by a lock
- It has 24VDC and 5VDC power supply output.
- It has FIRE and FAULT signal output.
- It has 2 general sounders output.
- Each zone has 1 circuit detectors input .Each zone can be disable by a button.
- It has RESET button to reset the panel.
- It has SILENCE button to stop BUZZER and SOUNDERS.
- It has EVACUATE button to start a manual fire alarm immediately.
- It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.It
- Â has an optional GSM module for fire alarm by SMS .
- Meet both EN54-3 and EN54 -23.
- Designed with an upper cover and a lower cover and installed on an independent base, it can be installed, debugged and maintained conveniently.
- Suitable for wall and ceiling mount application.
- Providing 16 tones.
- Highly efficient LED technology and specially designed lens.
- Light output synchronization.
- 32 tones (user selectable)
- 12V or 24V
- Secure clip fit base
- Volume control
- Fire approved and Signalling tone options
- For Fire, Security and Signalling
- Quick fitting for easy installation
- Reduce output to suit application
- Quick and simple to install | High sound output
- Low current consumption
- Multi-fixing base plate
- IP42 rated | Can be used for non fire applications
- Â Surface or flush mountable
- · Fast fit clip on front cover
- · Quick & simple to install
- · Single tool for testing and accessing the call point
- no wire connection
- 360° visibility LED using light pipe technology
- Wide range of detector types
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- Low profile design
- 360° viewable LED design
- Removable detector chamber for cleaning
- New enhanced detectors feature Dual LEDs,
- Drift compensation and Chamber monitoring (Optical & Photo-Thermal)
- Flexible high specification system
- Very easy to maintain and service
- Suitable for a large range of projects
- No fuses required
- Maintenance free poly switch circuit protection with auto reset
- Class change and programmable fire/fault relay as standard on 2/4 zone
- Discreet panel design
- Numerical access code (no lock keys)
- Supplied complete with battery for 24 hour standby
- Polycarbonate housing
- Flexible high specification system
- Very easy to maintain and service
- Suitable for a large range of projects
- No fuses required
- Maintenance free poly switch circuit protection with auto reset
- Class change and programmable fire/fault relay as standard on 2/4 zone
- Discreet panel design
- Numerical access code (no lock keys)
- Supplied complete with battery for 24 hour standby
- Polycarbonate housing
- Red Call Point
- 470 Ohm
- No LED
- Resettable plate insert
- Surface mount
- 87 x 87 x 53mm
- MX004: Resettable plate insert replacements (pack of 10)
Asenware Conventional LPG Gas Detector AW-D132C-4W 24V DC 4 wire
Asenware Conventional LPG Gas Detector AW-D132C-4W 24V DC 4 wire
Asenware Conventional Manual Call Point AW-D135C
Asenware Conventional Manual Call Point AW-D135C
Asenware Conventional Smoke Detector AW-CSD381
Asenware Conventional Smoke Detector AW-CSD381
Model No. : AW-CSD381
 Photo-Electric type spot detector
 Built in dual LEDs
 Visible from all around 360°
 Remote indicator output
 Compatible with most brands fire alarm panels.
 LPCB approved.
Hochiki Conventional Wall Sounder
Hochiki Conventional Wall Sounder
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
C-Tec Conventional Manual Call Point
C-Tec Conventional Manual Call Point
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
Cooper Menvier MBD50R Conventional Infra-Red Beam Receiver complete with mounting base – 50m Range
Cooper Menvier MBD50R Conventional Infra-Red Beam Receiver complete with mounting base – 50m Range
Asenware AW-CFP2166 16 Zone Conventional Fire Panel
Asenware AW-CFP2166 16 Zone Conventional Fire Panel
AW-D316 CONVENTIONAL SOUNDER BEACON
AW-D316 CONVENTIONAL SOUNDER BEACON
Menvier Conventional combined Fire Alarm Sounder and Strobe Light at 100dB(A) Max at 1m complete with mounting base
Menvier Conventional combined Fire Alarm Sounder and Strobe Light at 100dB(A) Max at 1m complete with mounting base
Menvier Conventional Bell
Menvier Conventional Bell
Menvier Conventional Manual Call Point
Menvier Conventional Manual Call Point
Menvier Conventional Heat Detector with Base
Menvier Conventional Heat Detector with Base
Menvier Conventional Smoke Detector with Base
Menvier Conventional Smoke Detector with Base
Cooper Menvier Conventional 2 zone Fire Panel
Cooper Menvier Conventional 2 zone Fire Panel
Cooper Menvier Conventional 4 zone Fire Panel
Cooper Menvier Conventional 4 zone Fire Panel
Asenware Conventional Fire Strobe Sounder aw-css2166-4
Asenware Conventional Fire Strobe Sounder aw-css2166-4
Weather-proof conventional fire strobe sounder is powered by a 24v electrical circuit. In the event of a fire, the sounder will sound and flash at the same time. Very stable and reliable; easy to install and wire; can be used in different emergency situations.
RESETTABLE FIRE MANUAL CALL POINT RED (CA-A002R)
RESETTABLE FIRE MANUAL CALL POINT RED (CA-A002R)
- Product: 4 wire LPG gas detector
- Brand: Asenware
- Model Number: AW-D132C-4W
- Power Consumption: ≤2W @Alarm
- Alarm Horn: ≥ 85dB @3m
- Main Voltage: 24V DC
- Alarm Outputs: DC12V pulse voltage and Relay( COM ,NO )
- Warm Up Time: Approximately 90 Seconds
- Size: 104.5mm* 58mm* 29.1mm
- Weight: About 62g
- Conventional Manual Call Point Appearance
- LED Indicator
- Conventional Manual Call Point Working Environment
- This conventional manual call point is suitable for indoor use, in order to better achieve product performance.
- This conventional manual call point complies with the EN54-11 standard
- Robust design
- Low current consumption
- Easy to install
- Maximum 110dB(A) at 1 metre (dependant on tone selected)
- 32 user-selectable tones
- Third-party certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc =Â 3.8mA.
- IP33C rated.
- Certified to EN54 Parts 11 (LPCB)Â and 13 (BSI).
- ‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
- Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
- Quick visible alarm indication.
- Changeover contacts.
- IP24 rated.
- 8 zones panels
- Flexible, high specification system
- Surface or semi-flush mounting
- Simple “one-shot” auto-reset user test facility
- Maintenance free poly switch circuit protection, with auto reset
- Class change and programmable fire/fault relay as standard
- Quick and simple to install
- Simple two wire connection
- No power supply required
- Quick and simple to install
- Simple two wire connection
- No power supply required
- It is modularized design, the panel can expend from 1 zone to 32 zones easily.
- It has 2 level control mode by a lock
- It has 24VDC and 5VDC power supply output.
- It has FIRE and FAULT signal output.
- It has 2 general sounders output.
- Each zone has 1 circuit detectors input .Each zone can be disable by a button.
- It has RESET button to reset the panel.
- It has SILENCE button to stop BUZZER and SOUNDERS.
- It has EVACUATE button to start a manual fire alarm immediately.
- It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.It
- Â has an optional GSM module for fire alarm by SMS .
- Meet both EN54-3 and EN54 -23.
- Designed with an upper cover and a lower cover and installed on an independent base, it can be installed, debugged and maintained conveniently.
- Suitable for wall and ceiling mount application.
- Providing 16 tones.
- Highly efficient LED technology and specially designed lens.
- Light output synchronization.
- 32 tones (user selectable)
- 12V or 24V
- Secure clip fit base
- Volume control
- Fire approved and Signalling tone options
- For Fire, Security and Signalling
- Quick fitting for easy installation
- Reduce output to suit application
- Quick and simple to install | High sound output
- Low current consumption
- Multi-fixing base plate
- IP42 rated | Can be used for non fire applications
- Â Surface or flush mountable
- · Fast fit clip on front cover
- · Quick & simple to install
- · Single tool for testing and accessing the call point
- no wire connection
- 360° visibility LED using light pipe technology
- Wide range of detector types
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- Low profile design
- 360° viewable LED design
- Removable detector chamber for cleaning
- New enhanced detectors feature Dual LEDs,
- Drift compensation and Chamber monitoring (Optical & Photo-Thermal)
- Flexible high specification system
- Very easy to maintain and service
- Suitable for a large range of projects
- No fuses required
- Maintenance free poly switch circuit protection with auto reset
- Class change and programmable fire/fault relay as standard on 2/4 zone
- Discreet panel design
- Numerical access code (no lock keys)
- Supplied complete with battery for 24 hour standby
- Polycarbonate housing
- Flexible high specification system
- Very easy to maintain and service
- Suitable for a large range of projects
- No fuses required
- Maintenance free poly switch circuit protection with auto reset
- Class change and programmable fire/fault relay as standard on 2/4 zone
- Discreet panel design
- Numerical access code (no lock keys)
- Supplied complete with battery for 24 hour standby
- Polycarbonate housing
- Red Call Point
- 470 Ohm
- No LED
- Resettable plate insert
- Surface mount
- 87 x 87 x 53mm
- MX004: Resettable plate insert replacements (pack of 10)
Asenware Conventional LPG Gas Detector AW-D132C-4W 24V DC 4 wire
Asenware Conventional LPG Gas Detector AW-D132C-4W 24V DC 4 wire
Asenware Conventional Manual Call Point AW-D135C
Asenware Conventional Manual Call Point AW-D135C
Asenware Conventional Smoke Detector AW-CSD381
Asenware Conventional Smoke Detector AW-CSD381
Model No. : AW-CSD381
 Photo-Electric type spot detector
 Built in dual LEDs
 Visible from all around 360°
 Remote indicator output
 Compatible with most brands fire alarm panels.
 LPCB approved.
Hochiki Conventional Wall Sounder
Hochiki Conventional Wall Sounder
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
C-Tec Conventional Manual Call Point
C-Tec Conventional Manual Call Point
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
Cooper Menvier MBD50R Conventional Infra-Red Beam Receiver complete with mounting base – 50m Range
Cooper Menvier MBD50R Conventional Infra-Red Beam Receiver complete with mounting base – 50m Range
Asenware AW-CFP2166 16 Zone Conventional Fire Panel
Asenware AW-CFP2166 16 Zone Conventional Fire Panel
AW-D316 CONVENTIONAL SOUNDER BEACON
AW-D316 CONVENTIONAL SOUNDER BEACON
Menvier Conventional combined Fire Alarm Sounder and Strobe Light at 100dB(A) Max at 1m complete with mounting base
Menvier Conventional combined Fire Alarm Sounder and Strobe Light at 100dB(A) Max at 1m complete with mounting base
Menvier Conventional Bell
Menvier Conventional Bell
Menvier Conventional Manual Call Point
Menvier Conventional Manual Call Point
Menvier Conventional Heat Detector with Base
Menvier Conventional Heat Detector with Base
Menvier Conventional Smoke Detector with Base
Menvier Conventional Smoke Detector with Base
Cooper Menvier Conventional 2 zone Fire Panel
Cooper Menvier Conventional 2 zone Fire Panel
Cooper Menvier Conventional 4 zone Fire Panel
Cooper Menvier Conventional 4 zone Fire Panel
Asenware Conventional Fire Strobe Sounder aw-css2166-4
Asenware Conventional Fire Strobe Sounder aw-css2166-4
Weather-proof conventional fire strobe sounder is powered by a 24v electrical circuit. In the event of a fire, the sounder will sound and flash at the same time. Very stable and reliable; easy to install and wire; can be used in different emergency situations.
RESETTABLE FIRE MANUAL CALL POINT RED (CA-A002R)
RESETTABLE FIRE MANUAL CALL POINT RED (CA-A002R)
- Product: 4 wire LPG gas detector
- Brand: Asenware
- Model Number: AW-D132C-4W
- Power Consumption: ≤2W @Alarm
- Alarm Horn: ≥ 85dB @3m
- Main Voltage: 24V DC
- Alarm Outputs: DC12V pulse voltage and Relay( COM ,NO )
- Warm Up Time: Approximately 90 Seconds
- Size: 104.5mm* 58mm* 29.1mm
- Weight: About 62g
- Conventional Manual Call Point Appearance
- LED Indicator
- Conventional Manual Call Point Working Environment
- This conventional manual call point is suitable for indoor use, in order to better achieve product performance.
- This conventional manual call point complies with the EN54-11 standard
- Robust design
- Low current consumption
- Easy to install
- Maximum 110dB(A) at 1 metre (dependant on tone selected)
- 32 user-selectable tones
- Third-party certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc =Â 3.8mA.
- IP33C rated.
- Certified to EN54 Parts 11 (LPCB)Â and 13 (BSI).
- ‘Universal’ design combines multiple functions into one product, simplifying selection and reducing stock variants.
- Supplied with a glass AND plastic element, a 470Ω AND 680Ω resistor and a red surface mounting back box which can be optionally discarded if flush mounting.
- Quick visible alarm indication.
- Changeover contacts.
- IP24 rated.
- 8 zones panels
- Flexible, high specification system
- Surface or semi-flush mounting
- Simple “one-shot” auto-reset user test facility
- Maintenance free poly switch circuit protection, with auto reset
- Class change and programmable fire/fault relay as standard
- Quick and simple to install
- Simple two wire connection
- No power supply required
- Quick and simple to install
- Simple two wire connection
- No power supply required
- It is modularized design, the panel can expend from 1 zone to 32 zones easily.
- It has 2 level control mode by a lock
- It has 24VDC and 5VDC power supply output.
- It has FIRE and FAULT signal output.
- It has 2 general sounders output.
- Each zone has 1 circuit detectors input .Each zone can be disable by a button.
- It has RESET button to reset the panel.
- It has SILENCE button to stop BUZZER and SOUNDERS.
- It has EVACUATE button to start a manual fire alarm immediately.
- It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.It
- Â has an optional GSM module for fire alarm by SMS .
- Meet both EN54-3 and EN54 -23.
- Designed with an upper cover and a lower cover and installed on an independent base, it can be installed, debugged and maintained conveniently.
- Suitable for wall and ceiling mount application.
- Providing 16 tones.
- Highly efficient LED technology and specially designed lens.
- Light output synchronization.
- 32 tones (user selectable)
- 12V or 24V
- Secure clip fit base
- Volume control
- Fire approved and Signalling tone options
- For Fire, Security and Signalling
- Quick fitting for easy installation
- Reduce output to suit application
- Quick and simple to install | High sound output
- Low current consumption
- Multi-fixing base plate
- IP42 rated | Can be used for non fire applications
- Â Surface or flush mountable
- · Fast fit clip on front cover
- · Quick & simple to install
- · Single tool for testing and accessing the call point
- no wire connection
- 360° visibility LED using light pipe technology
- Wide range of detector types
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- Low profile design
- 360° viewable LED design
- Removable detector chamber for cleaning
- New enhanced detectors feature Dual LEDs,
- Drift compensation and Chamber monitoring (Optical & Photo-Thermal)
- Flexible high specification system
- Very easy to maintain and service
- Suitable for a large range of projects
- No fuses required
- Maintenance free poly switch circuit protection with auto reset
- Class change and programmable fire/fault relay as standard on 2/4 zone
- Discreet panel design
- Numerical access code (no lock keys)
- Supplied complete with battery for 24 hour standby
- Polycarbonate housing
- Flexible high specification system
- Very easy to maintain and service
- Suitable for a large range of projects
- No fuses required
- Maintenance free poly switch circuit protection with auto reset
- Class change and programmable fire/fault relay as standard on 2/4 zone
- Discreet panel design
- Numerical access code (no lock keys)
- Supplied complete with battery for 24 hour standby
- Polycarbonate housing
- Red Call Point
- 470 Ohm
- No LED
- Resettable plate insert
- Surface mount
- 87 x 87 x 53mm
- MX004: Resettable plate insert replacements (pack of 10)
Asenware Conventional LPG Gas Detector AW-D132C-4W 24V DC 4 wire
Asenware Conventional LPG Gas Detector AW-D132C-4W 24V DC 4 wire
Asenware Conventional Manual Call Point AW-D135C
Asenware Conventional Manual Call Point AW-D135C
Asenware Conventional Smoke Detector AW-CSD381
Asenware Conventional Smoke Detector AW-CSD381
Model No. : AW-CSD381
 Photo-Electric type spot detector
 Built in dual LEDs
 Visible from all around 360°
 Remote indicator output
 Compatible with most brands fire alarm panels.
 LPCB approved.
Hochiki Conventional Wall Sounder
Hochiki Conventional Wall Sounder
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
CTEC Conventional Hi-Output 100dB(A) Wall Sounder (deep base)
C-Tec Conventional Manual Call Point
C-Tec Conventional Manual Call Point
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper Menvier FX2208CFCPD Conventional 8 Zone Control Panel
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
Cooper MBD100R Conventional Infra-Red Beam Transmitter complete with mounting base – 100m Range
Cooper Menvier MBD50R Conventional Infra-Red Beam Receiver complete with mounting base – 50m Range
Cooper Menvier MBD50R Conventional Infra-Red Beam Receiver complete with mounting base – 50m Range
Asenware AW-CFP2166 16 Zone Conventional Fire Panel
Asenware AW-CFP2166 16 Zone Conventional Fire Panel
AW-D316 CONVENTIONAL SOUNDER BEACON
AW-D316 CONVENTIONAL SOUNDER BEACON
Menvier Conventional combined Fire Alarm Sounder and Strobe Light at 100dB(A) Max at 1m complete with mounting base
Menvier Conventional combined Fire Alarm Sounder and Strobe Light at 100dB(A) Max at 1m complete with mounting base
Menvier Conventional Bell
Menvier Conventional Bell
Menvier Conventional Manual Call Point
Menvier Conventional Manual Call Point
Menvier Conventional Heat Detector with Base
Menvier Conventional Heat Detector with Base
Menvier Conventional Smoke Detector with Base
Menvier Conventional Smoke Detector with Base
Cooper Menvier Conventional 2 zone Fire Panel
Cooper Menvier Conventional 2 zone Fire Panel
Cooper Menvier Conventional 4 zone Fire Panel
Cooper Menvier Conventional 4 zone Fire Panel
Asenware Conventional Fire Strobe Sounder aw-css2166-4
Asenware Conventional Fire Strobe Sounder aw-css2166-4
Weather-proof conventional fire strobe sounder is powered by a 24v electrical circuit. In the event of a fire, the sounder will sound and flash at the same time. Very stable and reliable; easy to install and wire; can be used in different emergency situations.
