Cooper Menvier MAB100R Addressable Reflective Beam Detector (100m Range)

Availability:In Stock!

Cooper Menvier MAB100R Addressable Reflective Beam Detector (100m Range)
  • Loop powered
  • Soft addressed
  • Integral short circuit Isolator
  • Single address
  • Reflective beam detection
  • Quick and simple to setup
  • Saves on both time and installation costs
  • No power supply required
  • Single device to install instead of numerous point detectors
  • Single point of maintenance
  • Wall mounted for ease of maintenance, especially in warehouses with racking

Kit Contains:

  • 1 x Detector Head Assembly
  • 4 x Prism for the MAB100R
  • 1 x Dual Test Filter
  • 1 x 4-way Connector for in line wiring
  • 1 x 4-way Connector for right angle wiring
Compare

KSh140,000.00 Excl. VAT

Please confirm product availability before placing an order.
Delivery within 24 hours. Same day delivery within Nairobi.
Secure Payment Options
Mpesa Payment Visa Payment Mastercard Payment

Order on Whatsapp

Compare

Description

Cooper Menvier MAB100R Addressable Reflective Beam Detector (100m Range)

Two versions of the intelligent addressable loop powered reflective beam detectors are available in this range, the MAB50R with a range of up to 50 metres and the MAB100R with a range of 50 to 100 meters. Both the MAB50R and the MAB100R are compatible with Eaton’s range of intelligent addressable fire systems.

These intelligent addressable loops powered reflective beam detectors are extremely simple to install, they require no separate power supply, operate on a reflective principle and have a simple set up mode to enable easy and quick alignment during installation. These units are designed to replace individual point detectors in large open areas such as warehouses. Fire and fault conditions are signalled to the control panel using standard loop wiring so no additional interconnection required.

Benefits

  • Quick and simple to setup
  • Saves on both time and installation costs
  • No power supply required
  • Single device to install instead of numerous point detectors
  • Single point of maintenance
  • Wall mounted for ease of maintenance, especially in warehouses with racking
Code MAB50R/MAB100R
Description Reflective Beam Detector
Standards EN54 Pt12 & Pt17 2002
Specification
Operating Voltage 18V dc to 30V dc
Quiescent Current <5mA (no LED’s illuminated)
Alarm Current <9mA
Alignment Current <18mA
Power up Time 10 seconds (approx.)
Operating Range 5 to 50 meters (MAB50R) 5 to 100meters (MAB100R)
Tolerance to Beam Alignment at 35% Detector + 0.8O, Prism +5.0O
Fire Alarm Thresholds 2.50dB (25%) 3.74dB (35%) 6.02dB (50%)
Optical Wavelength 880nm
Environmental
Operating Temperature -10OC – +55OC
Humidity (Non Condensing) 0 to 93% RH
Physical
Construction PC/ABS
Color White
Dimensions (HxWxD) 210mm x 130mm x 120mm
Weight 0.8kg
Ingress Protection IP40
Compatibility
Suitable for use with Cooper Intelligence Addressable Fire Systems

Review (1)

0.0
0
0
0
0
0

Add a review

  1. Avatar Of Tlover Tonet

    tlover tonet

    Hello, you used to write excellent, but the last few posts have been kinda boringK I miss your great writings. Past few posts are just a bit out of track! come on!

Need Help? Chat with us