- no wire connection
- 360° visibility LED using light pipe technology
- Wide range of detector types
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- Soft addressed
- Integral short circuit isolator
- Single address
- Wide range of sensor types
- 360° visibility LED using light-pipe technology
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- A high quality Type CS static high temperature heat detector.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
- Fitted with two alarm LEDs to allow 360º visibility.
- Third-party certified to EN54-5 by UL International (UK) Limited.
- 9-33V DC operating voltage.
- Requires a 45681-244APO AlarmSense base.
- Can also be purchased as part of a detector/sounder or detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
- Electronic linear heat detection
- Remote Indicator output
- Wide voltage range (9.5 ~ 30 V dc)
- Twin fire LEDs allow 360 degree viewing
- Fixed Temperature Detector
- Full range of mounting bases
- Approved by LPCB & VdS
- Also available in white
- Alarm flag for fast alarm reporting.
- Electronics-free base.
- Insect-resistant.
- Easy installation.
- Unaffected by wind or atmospheric pressure.
- Well suited for warehouses, loading bays, and car parks.
- Ideal in environments that are dirty or smokey under normal conditions.
KSh3,200.00 Excl. VAT
Asenware AW‑D102 Addressable Heat Detector
SKU: N/AAsenware AW‑D102 Addressable Heat Detector
Asenware AW‑D102 Addressable Heat Detector: The Asenware AW-D102 is an intelligent addressable heat detector designed for use with addressable fire alarm systems such as the AW-FP100 series fire alarm control panels. Each detector is assigned a unique address (ID) so the fire alarm panel can continuously monitor the exact location and status of every detector in the loop.
This detector senses temperature rise or fixed temperature thresholds and sends an alarm signal to the fire alarm control panel when fire conditions are detected.
KSh3,800.00 Excl. VAT
Menvier Conventional Heat Detector with Base
SKU: N/AMenvier Conventional Heat Detector with Base
KSh5,000.00 Excl. VAT
Menvier Heat Detector with base (Addressable)
SKU: 1005Menvier Heat Detector with base (Addressable)
KSh3,200.00 Excl. VAT
CTEC Conventional Heat Detector
SKU: 938CTEC Conventional Heat Detector
KSh2,500.00 Excl. VAT
Hochiki Conventional heat detector
SKU: 67Hochiki Conventional heat detector
KSh5,800.00 Excl. VAT
Apollo Addressable Heat Detector
SKU: IFS5370505Apollo Addressable Heat Detector
- no wire connection
- 360° visibility LED using light pipe technology
- Wide range of detector types
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- Soft addressed
- Integral short circuit isolator
- Single address
- Wide range of sensor types
- 360° visibility LED using light-pipe technology
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- A high quality Type CS static high temperature heat detector.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
- Fitted with two alarm LEDs to allow 360º visibility.
- Third-party certified to EN54-5 by UL International (UK) Limited.
- 9-33V DC operating voltage.
- Requires a 45681-244APO AlarmSense base.
- Can also be purchased as part of a detector/sounder or detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
- Electronic linear heat detection
- Remote Indicator output
- Wide voltage range (9.5 ~ 30 V dc)
- Twin fire LEDs allow 360 degree viewing
- Fixed Temperature Detector
- Full range of mounting bases
- Approved by LPCB & VdS
- Also available in white
- Alarm flag for fast alarm reporting.
- Electronics-free base.
- Insect-resistant.
- Easy installation.
- Unaffected by wind or atmospheric pressure.
- Well suited for warehouses, loading bays, and car parks.
- Ideal in environments that are dirty or smokey under normal conditions.
Asenware AW‑D102 Addressable Heat Detector
Asenware AW‑D102 Addressable Heat Detector
Asenware AW‑D102 Addressable Heat Detector: The Asenware AW-D102 is an intelligent addressable heat detector designed for use with addressable fire alarm systems such as the AW-FP100 series fire alarm control panels. Each detector is assigned a unique address (ID) so the fire alarm panel can continuously monitor the exact location and status of every detector in the loop.
This detector senses temperature rise or fixed temperature thresholds and sends an alarm signal to the fire alarm control panel when fire conditions are detected.
Menvier Conventional Heat Detector with Base
Menvier Conventional Heat Detector with Base
Menvier Heat Detector with base (Addressable)
Menvier Heat Detector with base (Addressable)
CTEC Conventional Heat Detector
CTEC Conventional Heat Detector
Hochiki Conventional heat detector
Hochiki Conventional heat detector
Apollo Addressable Heat Detector
Apollo Addressable Heat Detector
- no wire connection
- 360° visibility LED using light pipe technology
- Wide range of detector types
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- Soft addressed
- Integral short circuit isolator
- Single address
- Wide range of sensor types
- 360° visibility LED using light-pipe technology
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- A high quality Type CS static high temperature heat detector.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
- Fitted with two alarm LEDs to allow 360º visibility.
- Third-party certified to EN54-5 by UL International (UK) Limited.
- 9-33V DC operating voltage.
- Requires a 45681-244APO AlarmSense base.
- Can also be purchased as part of a detector/sounder or detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
- Electronic linear heat detection
- Remote Indicator output
- Wide voltage range (9.5 ~ 30 V dc)
- Twin fire LEDs allow 360 degree viewing
- Fixed Temperature Detector
- Full range of mounting bases
- Approved by LPCB & VdS
- Also available in white
- Alarm flag for fast alarm reporting.
- Electronics-free base.
- Insect-resistant.
- Easy installation.
- Unaffected by wind or atmospheric pressure.
- Well suited for warehouses, loading bays, and car parks.
- Ideal in environments that are dirty or smokey under normal conditions.
Asenware AW‑D102 Addressable Heat Detector
Asenware AW‑D102 Addressable Heat Detector
Asenware AW‑D102 Addressable Heat Detector: The Asenware AW-D102 is an intelligent addressable heat detector designed for use with addressable fire alarm systems such as the AW-FP100 series fire alarm control panels. Each detector is assigned a unique address (ID) so the fire alarm panel can continuously monitor the exact location and status of every detector in the loop.
This detector senses temperature rise or fixed temperature thresholds and sends an alarm signal to the fire alarm control panel when fire conditions are detected.
Menvier Conventional Heat Detector with Base
Menvier Conventional Heat Detector with Base
Menvier Heat Detector with base (Addressable)
Menvier Heat Detector with base (Addressable)
CTEC Conventional Heat Detector
CTEC Conventional Heat Detector
Hochiki Conventional heat detector
Hochiki Conventional heat detector
Apollo Addressable Heat Detector
Apollo Addressable Heat Detector
- no wire connection
- 360° visibility LED using light pipe technology
- Wide range of detector types
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- Soft addressed
- Integral short circuit isolator
- Single address
- Wide range of sensor types
- 360° visibility LED using light-pipe technology
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- A high quality Type CS static high temperature heat detector.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
- Fitted with two alarm LEDs to allow 360º visibility.
- Third-party certified to EN54-5 by UL International (UK) Limited.
- 9-33V DC operating voltage.
- Requires a 45681-244APO AlarmSense base.
- Can also be purchased as part of a detector/sounder or detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
- Electronic linear heat detection
- Remote Indicator output
- Wide voltage range (9.5 ~ 30 V dc)
- Twin fire LEDs allow 360 degree viewing
- Fixed Temperature Detector
- Full range of mounting bases
- Approved by LPCB & VdS
- Also available in white
- Alarm flag for fast alarm reporting.
- Electronics-free base.
- Insect-resistant.
- Easy installation.
- Unaffected by wind or atmospheric pressure.
- Well suited for warehouses, loading bays, and car parks.
- Ideal in environments that are dirty or smokey under normal conditions.
Asenware AW‑D102 Addressable Heat Detector
Asenware AW‑D102 Addressable Heat Detector
Asenware AW‑D102 Addressable Heat Detector: The Asenware AW-D102 is an intelligent addressable heat detector designed for use with addressable fire alarm systems such as the AW-FP100 series fire alarm control panels. Each detector is assigned a unique address (ID) so the fire alarm panel can continuously monitor the exact location and status of every detector in the loop.
This detector senses temperature rise or fixed temperature thresholds and sends an alarm signal to the fire alarm control panel when fire conditions are detected.
Menvier Conventional Heat Detector with Base
Menvier Conventional Heat Detector with Base
Menvier Heat Detector with base (Addressable)
Menvier Heat Detector with base (Addressable)
CTEC Conventional Heat Detector
CTEC Conventional Heat Detector
Hochiki Conventional heat detector
Hochiki Conventional heat detector
