Availability:In Stock!
TP-Link CPE510 5GHz 300Mbps 13dBi Outdoor CPE
- Adjustable transmission power from 0 to 23dBm/200mw
- System-level optimizations for more than 15km long-range wireless transmission
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity, and latency performance, ideal for PTMP applications
Buy at the Best and Discounted prices in Nairobi Kenya
KSh7,200.00 Excl. VAT
CompareDescription
TP-Link CPE510 5GHz 300Mbps 13dBi Outdoor CPE
TP-Link 5GHz 300Mbps 13dBi Outdoor CPE CPE510 is Built-in 13dBi 2×2 dual-polarized directional MIMO antenna. TP-LINK’s 5GHz 300Mbps 13dBi Outdoor CPE, the CPE510 is dedicated to cost-effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint, and outdoor Wi-Fi coverage applications. Professional performance, coupled with a user-friendly design, makes CPE510 an ideal choice for both business and home users.
TP-Link CPE510 Outdoor CPE Features
15km+ Wireless Data Transmission
CPE510 is designed for outdoor Internet Network installation, ideal for long-distance wireless data transmission over 15km+, tested in the field.
Advanced Antenna System
Built-in High Gain Dual-Polarized Antenna dedicated metal reflector ensures higher gain and lower noise interference.
Hardware for Weather Outside Weather.
Professional Qualcomm Atheros chipset, high gain antennas, high-quality materials, specially designed housing, and PoE power supply, the TP-Link CPE510 access point is specially designed for outdoor use and can perform well in almost any climate, with operating temperatures between 40 ℃ and + 70.
MAXtream TDMA Technology.
The CPE510 uses MAXtream TDMA technology to mitigate the effects of wireless competition and collisions between CPEs as network configurations increase in the area. An example is a drop in the actual throughput of the network.
Pharos Control – Centralized Management System.
TP-Link CPE510 also comes with centralized management software that helps the network admins easily manage all devices in their network from a single control PC. Functions like device discovery, health monitoring, firmware update, and network maintenance can be managed using Pharos Control.
| HARDWARE FEATURES | |
|---|---|
| PROCESSOR | Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc |
| MEMORY | 64MB DDR2 RAM, 8MB Flash |
| INTERFACE | 1 10/100Mbps Shielded Ethernet Port (Passive PoE in) 1 Grounding Terminal 1 Reset Button |
| POWER SUPPLY | Passive Power over Ethernet via LAN0 ( 4,5pins; -7,8pins) Voltage range: 16-27VDC |
| POWER CONSUMPTION | 10.5 Watts Max Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable. |
| DIMENSIONS ( W X D X H ) | 224 x 79 x 60 mm |
| ANTENNA TYPE | Built-in 13dBi 2×2 Dual-polarized Directional Antenna Beam Width: 45° (H-Plane) / 30° (E-Plane) Note: For more details, please refer to the datasheet |
| PROTECTION | 15KV ESD Protection 6KV Lightning Protection |
| ENCLOSURE | Outdoor ASA stabilized plastic material IPX5 waterproof Certification |
| WIRELESS FEATURES | |
|---|---|
| WIRELESS STANDARDS | IEEE 802.11a/n (with Pharos MAXtream disabled) |
| PROPRIETARY PROTOCOL | TDMA Mode (with Pharos MAXtream enabled) |
| WIRELESS SPEEDS | Up to 300Mbps (40MHz,Dynamic) Up to 144.4Mbps (20MHz,Dynamic) Up to 72.2Mbps (10MHz,Dynamic) Up to 36.1Mbps (5MHz,Dynamic) |
| FREQUENCY | 5.15~5.85GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used. |
| TRANSMISSION POWER | 23dBm/200mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used. |
| SOFTWARE FEATURES | |
|---|---|
| WIRELESS CONFIGURATIONS | Pharos MAXtream TDMA Technology 802.11a/n Modes Selectable Channel Width: 5/10/20/40MHz Automatic Channel Selection Transmission Power Control Dynamic Frequency Selection (DFS) WDS Enable/Disable Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption SSID Broadcast Enable/Disable Multi-SSID with VLAN Tagging (AP mode only) Distance/ACK Timeout Setting Wireless MAC Address Filter Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia |
| MANAGEMENT | Discovery and Remote Management via Pharos Control application HTTP/HTTPS Web-based management System Log SNMP Agent(v2c) Ping Watch Dog Dynamic DDNS SSH Server |
| SYSTEM TOOLS | Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP Spectrum Analyzer Speed Test Ping Traceroute |
| SYSTEM-LEVEL OPTIMIZATIONS | Optimized IGMP Snooping/Proxy for multicast applications Hardware watch dog |
| POE ADAPTER FEATURES | |
|---|---|
| DIMENSIONS(W X D X H) | 110*57*33.5mm |
| INPUT CURRENT | 0.8A Max @ 100VAC |
| INPUT VOLTAGE | 100VA~240VAC @ 50Hz~60Hz |
| OUTPUT | 24VDC, 1.0A Max 4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet) |
| EFFICIENCY | >80% |
| OUTPUT VOLTAGE | 24VDC( 4,5pins; -7,8pins) |
| INPUT | 100-240VAC, 50/60Hz |
| POWER STATUS LEDS | 0~0.8A: Green 0.8A~1.0A: Red |
| CERTIFICATIONS | CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark |
| INTERFACES | 1 AC Jack with Earth Ground 1 10/100/1000Mbps Shielded Ethernet Port (Power Data) |
| BUTTON | Remote Reset Button |
| OTHERS | |
|---|---|
| CERTIFICATION | CE, FCC, RoHS, IPX5 |
| PACKAGE CONTENTS | Outdoor Wireless CPE 24V 1A Passive PoE Adapter Pole Mounting Straps AC Power Cord Installation Guide |
| SYSTEM REQUIREMENTS | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended. |
| ENVIRONMENT | Operating Temperature: -30°C~70°C (-22℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing |
There are no reviews yet.