- Low profile, two inches including the base
- Simple and reliable addressing without mechanical switches
- Automatic compensation for sensor contamination
- Built-in fire test feature
- Vandal resistance locking features
- Field cleanable
- IP rating: IP67
- Glass element
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
- Soft addressed
- Integral short circuit isolator
- Single address
- Wide range of sensor types
- 360° visibility LED using lightpipe technology
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
KSh7,500.00 Excl. VAT
Honeywell Addressable Photoelectric Smoke Detector
SKU: N/A
KSh10,500.00 Excl. VAT
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
SKU: N/AW5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
KSh7,500.00 Excl. VAT
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
SKU: N/AHM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
KSh5,000.00 Excl. VAT
Menvier Smoke Detector with base (Addressable)
SKU: 1006Menvier Smoke Detector with base (Addressable)
KSh4,000.00 Excl. VAT
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
SKU: N/AHikFire Addressable Isolator Module HF-AIM1 (O-STD)
The HikFire HF-AIM1 (O-STD) Addressable Isolator Module provides short-circuit protection for compatible addressable fire alarm systems. It helps prevent a short circuit in one section of the loop from disrupting communication across the entire system, improving reliability and continuity of fire detection.
KSh4,000.00 Excl. VAT
HikFire Addressable Manual Call Point HF-AMP1 (O-STD)
SKU: N/AHikFire Addressable Manual Call Point HF-AMP1 (O-STD)
The HikFire HF-AMP1 (O-STD) Addressable Manual Call Point provides a reliable means of manually raising a fire alarm in an emergency. Designed for compatible HikFire addressable fire alarm systems, it enables the control panel to identify the activated device location. Its manual reset mechanism supports convenient resetting after activation.
KSh4,000.00 Excl. VAT
HikFire Addressable Sounder Strobe HF-ASS1 (O-STD)
SKU: N/AHikFire Addressable Sounder Strobe HF-ASS1 (O-STD)
The HikFire HF-ASS1 (O-STD) Addressable Sounder Strobe combines audible and visual alerts in one device for effective fire emergency notification. Designed for compatible HikFire addressable fire alarm systems, it communicates through the addressable bus and provides sound and flashing light when activated.
KSh4,000.00 Excl. VAT
HikFire Addressable Heat Detector HF-AH1 (O-STD)
SKU: N/AHikFire Addressable Heat Detector HF-AH1 (O-STD)
The HikFire HF-AH1 (O-STD) Addressable Heat Detector provides reliable heat detection for fire alarm installations in areas where smoke detectors may be unsuitable. It connects to a compatible addressable fire alarm system, enabling individual device identification and alarm monitoring.
KSh4,000.00 Excl. VAT
HikFire Addressable Smoke Detector HF-AS1 (O-STD)
SKU: N/AHikFire Addressable Smoke Detector HF-AS1 (O-STD)
The HikFire HF-AS1 (O-STD) Addressable Smoke Detector uses photoelectric sensing technology to detect smoke and transmit alarm information to the fire alarm control panel. Its two-wire connection and low standby current make it suitable for commercial, institutional and residential fire protection installations.
KSh14,000.00 Excl. VAT
HikFire HK-BMQ-8250 Encoder
SKU: N/AHikFire HK-BMQ-8250 Encoder
The HikFire HK-BMQ-8250 Electronic Encoder is a professional address programming and testing tool designed for HikFire addressable fire alarm systems. It allows installers and technicians to read and write device addresses, register devices, check duplicate addresses, detect resistance and perform device programming and maintenance.
KSh205,000.00 HikFire Addressable 4 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/4
SKU: N/AHikFire Addressable 4 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/4
The HikFire JB-LBZ2-HK8308/4 is a 4-loop addressable fire alarm control and linkage panel designed for centralized fire alarm monitoring, indication and system control. With up to 250 addressable points per loop, the 4-loop configuration supports up to 1,000 addressable devices. The HK8308 series is available in configurations up to 8 loops.
KSh148,000.00 HikFire Addressable 2 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/2
SKU: N/AHikFire Addressable 2 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/2
The HikFire JB-LBZ2-HK8308/2 is a 2-loop addressable fire alarm control and linkage panel designed for centralized monitoring, alarm indication and fire-system control. It supports 250 addressable devices per loop, giving a standard capacity of up to 500 addressable points, with the HK8308 family supporting configurations up to 8 loops.
KSh132,000.00 HikFire Addressable 1 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/1
SKU: N/AHikFire Addressable 1 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/1
HikFire JB-LBZ2-HK8308/1 Addressable Fire Alarm Control Panel is a reliable 1-loop fire alarm control and linkage panel designed for intelligent fire detection and emergency control. Supporting up to 250 addressable devices on its loop and expandable to 8 loops, it provides centralized monitoring of detectors, manual call points, sounders and interface modules.
KSh22,000.00 Excl. VAT
HikFire Addressable Fire Display Panel – HK-XS-8016
SKU: N/AHikFire Addressable Fire Display Panel – HK-XS-8016
HikFire HK-XS-8016 Addressable Fire Display Panel provides clear local indication of fire alarm events within a monitored area. Featuring a 128 × 64 LCD display, audible and visual alarm indication, and a non-polarity two-wire communication bus, the panel allows personnel to quickly view fire alarm information and identify events. Its compact wall-mounted design makes it suitable for offices, hotels, commercial buildings, industrial facilities and other premises using HikFire addressable fire alarm systems.
KSh8,500.00 Excl. VAT
HikFire Addressable I/O Module – Active High-Current Pulse Output HK-LD-8022
SKU: N/A
KSh8,000.00 Excl. VAT
HikFire Addressable I/O Module – Active Level Output HK-LD-8021
SKU: N/AHikFire Addressable I/O Module – Active Level Output HK-LD-8021
HikFire HK-LD-8021 Addressable I/O Module – Active Level Output provides reliable addressable control and monitoring for fire alarm linkage applications. Featuring an active-level output, the module can provide an electrical control signal to connected equipment while communicating with the fire alarm control panel through a two-wire, non-polarity bus. Its separate-base design, LED status indicators, external line monitoring and short-circuit protection make it suitable for integration into HikFire
KSh8,000.00 Excl. VAT
HikFire Addressable I/O Module – Passive Output HK-LD-8020
SKU: N/AHikFire Addressable I/O Module – Passive Output HK-LD-8020
HikFire HK-LD-8020 Addressable I/O Module – Passive Output provides a reliable interface between a HikFire addressable fire alarm system and external fire protection equipment. Featuring passive contact output and NO/NC input, the module can control devices such as electromagnetic valves and exhaust valves while providing equipment status feedback to the fire alarm control panel. Its non-polarity two-wire addressable communication, LED status indication, line break detection and short-circuit protection make it suitable for fire alarm system integration and control applications.
KSh3,000.00 Excl. VAT
Hikfire Addressable Manual Call Point (J-SAP-HK8010)
SKU: N/AHikfire Addressable Manual Call Point (J-SAP-HK8010)
The HikFire J-SAP-HK8010 provides a dependable means of manually triggering a fire alarm during an emergency. Its addressable communication enables the fire alarm control panel to identify the activated device, supporting faster identification of the alarm location. The resettable mechanism allows the call point to be returned to normal operation after activation.
KSh6,500.00 Excl. VAT
HikFire Addressable Input Module – Relay Input HK-LD-8023
SKU: N/AHikFire Addressable Input Module – Relay Input HK-LD-8023
HikFire HK-LD-8023 Addressable Input Module provides reliable monitoring of external fire protection equipment through relay or dry-contact feedback signals. The module receives status information from devices such as water flow indicators, pressure switches and signal valves, then communicates the condition to the HikFire addressable fire alarm control panel. Its non-polarity two-wire bus, low-power operation, line fault detection and short-circuit protection make it suitable for integration into addressable fire alarm and fire protection systems.
- Low profile, two inches including the base
- Simple and reliable addressing without mechanical switches
- Automatic compensation for sensor contamination
- Built-in fire test feature
- Vandal resistance locking features
- Field cleanable
- IP rating: IP67
- Glass element
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
- Soft addressed
- Integral short circuit isolator
- Single address
- Wide range of sensor types
- 360° visibility LED using lightpipe technology
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
Honeywell Addressable Photoelectric Smoke Detector
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
Menvier Smoke Detector with base (Addressable)
Menvier Smoke Detector with base (Addressable)
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
The HikFire HF-AIM1 (O-STD) Addressable Isolator Module provides short-circuit protection for compatible addressable fire alarm systems. It helps prevent a short circuit in one section of the loop from disrupting communication across the entire system, improving reliability and continuity of fire detection.
HikFire Addressable Manual Call Point HF-AMP1 (O-STD)
HikFire Addressable Manual Call Point HF-AMP1 (O-STD)
The HikFire HF-AMP1 (O-STD) Addressable Manual Call Point provides a reliable means of manually raising a fire alarm in an emergency. Designed for compatible HikFire addressable fire alarm systems, it enables the control panel to identify the activated device location. Its manual reset mechanism supports convenient resetting after activation.
HikFire Addressable Sounder Strobe HF-ASS1 (O-STD)
HikFire Addressable Sounder Strobe HF-ASS1 (O-STD)
The HikFire HF-ASS1 (O-STD) Addressable Sounder Strobe combines audible and visual alerts in one device for effective fire emergency notification. Designed for compatible HikFire addressable fire alarm systems, it communicates through the addressable bus and provides sound and flashing light when activated.
HikFire Addressable Heat Detector HF-AH1 (O-STD)
HikFire Addressable Heat Detector HF-AH1 (O-STD)
The HikFire HF-AH1 (O-STD) Addressable Heat Detector provides reliable heat detection for fire alarm installations in areas where smoke detectors may be unsuitable. It connects to a compatible addressable fire alarm system, enabling individual device identification and alarm monitoring.
HikFire Addressable Smoke Detector HF-AS1 (O-STD)
HikFire Addressable Smoke Detector HF-AS1 (O-STD)
The HikFire HF-AS1 (O-STD) Addressable Smoke Detector uses photoelectric sensing technology to detect smoke and transmit alarm information to the fire alarm control panel. Its two-wire connection and low standby current make it suitable for commercial, institutional and residential fire protection installations.
HikFire HK-BMQ-8250 Encoder
HikFire HK-BMQ-8250 Encoder
The HikFire HK-BMQ-8250 Electronic Encoder is a professional address programming and testing tool designed for HikFire addressable fire alarm systems. It allows installers and technicians to read and write device addresses, register devices, check duplicate addresses, detect resistance and perform device programming and maintenance.
HikFire Addressable 4 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/4
HikFire Addressable 4 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/4
The HikFire JB-LBZ2-HK8308/4 is a 4-loop addressable fire alarm control and linkage panel designed for centralized fire alarm monitoring, indication and system control. With up to 250 addressable points per loop, the 4-loop configuration supports up to 1,000 addressable devices. The HK8308 series is available in configurations up to 8 loops.
HikFire Addressable 2 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/2
HikFire Addressable 2 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/2
The HikFire JB-LBZ2-HK8308/2 is a 2-loop addressable fire alarm control and linkage panel designed for centralized monitoring, alarm indication and fire-system control. It supports 250 addressable devices per loop, giving a standard capacity of up to 500 addressable points, with the HK8308 family supporting configurations up to 8 loops.
HikFire Addressable 1 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/1
HikFire Addressable 1 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/1
HikFire JB-LBZ2-HK8308/1 Addressable Fire Alarm Control Panel is a reliable 1-loop fire alarm control and linkage panel designed for intelligent fire detection and emergency control. Supporting up to 250 addressable devices on its loop and expandable to 8 loops, it provides centralized monitoring of detectors, manual call points, sounders and interface modules.
HikFire Addressable Fire Display Panel – HK-XS-8016
HikFire Addressable Fire Display Panel – HK-XS-8016
HikFire HK-XS-8016 Addressable Fire Display Panel provides clear local indication of fire alarm events within a monitored area. Featuring a 128 × 64 LCD display, audible and visual alarm indication, and a non-polarity two-wire communication bus, the panel allows personnel to quickly view fire alarm information and identify events. Its compact wall-mounted design makes it suitable for offices, hotels, commercial buildings, industrial facilities and other premises using HikFire addressable fire alarm systems.
HikFire Addressable I/O Module – Active High-Current Pulse Output HK-LD-8022
HikFire Addressable I/O Module – Active Level Output HK-LD-8021
HikFire Addressable I/O Module – Active Level Output HK-LD-8021
HikFire HK-LD-8021 Addressable I/O Module – Active Level Output provides reliable addressable control and monitoring for fire alarm linkage applications. Featuring an active-level output, the module can provide an electrical control signal to connected equipment while communicating with the fire alarm control panel through a two-wire, non-polarity bus. Its separate-base design, LED status indicators, external line monitoring and short-circuit protection make it suitable for integration into HikFire
HikFire Addressable I/O Module – Passive Output HK-LD-8020
HikFire Addressable I/O Module – Passive Output HK-LD-8020
HikFire HK-LD-8020 Addressable I/O Module – Passive Output provides a reliable interface between a HikFire addressable fire alarm system and external fire protection equipment. Featuring passive contact output and NO/NC input, the module can control devices such as electromagnetic valves and exhaust valves while providing equipment status feedback to the fire alarm control panel. Its non-polarity two-wire addressable communication, LED status indication, line break detection and short-circuit protection make it suitable for fire alarm system integration and control applications.
Hikfire Addressable Manual Call Point (J-SAP-HK8010)
Hikfire Addressable Manual Call Point (J-SAP-HK8010)
The HikFire J-SAP-HK8010 provides a dependable means of manually triggering a fire alarm during an emergency. Its addressable communication enables the fire alarm control panel to identify the activated device, supporting faster identification of the alarm location. The resettable mechanism allows the call point to be returned to normal operation after activation.
HikFire Addressable Input Module – Relay Input HK-LD-8023
HikFire Addressable Input Module – Relay Input HK-LD-8023
HikFire HK-LD-8023 Addressable Input Module provides reliable monitoring of external fire protection equipment through relay or dry-contact feedback signals. The module receives status information from devices such as water flow indicators, pressure switches and signal valves, then communicates the condition to the HikFire addressable fire alarm control panel. Its non-polarity two-wire bus, low-power operation, line fault detection and short-circuit protection make it suitable for integration into addressable fire alarm and fire protection systems.
- Low profile, two inches including the base
- Simple and reliable addressing without mechanical switches
- Automatic compensation for sensor contamination
- Built-in fire test feature
- Vandal resistance locking features
- Field cleanable
- IP rating: IP67
- Glass element
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
- Soft addressed
- Integral short circuit isolator
- Single address
- Wide range of sensor types
- 360° visibility LED using lightpipe technology
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
Honeywell Addressable Photoelectric Smoke Detector
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
Menvier Smoke Detector with base (Addressable)
Menvier Smoke Detector with base (Addressable)
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
The HikFire HF-AIM1 (O-STD) Addressable Isolator Module provides short-circuit protection for compatible addressable fire alarm systems. It helps prevent a short circuit in one section of the loop from disrupting communication across the entire system, improving reliability and continuity of fire detection.
HikFire Addressable Manual Call Point HF-AMP1 (O-STD)
HikFire Addressable Manual Call Point HF-AMP1 (O-STD)
The HikFire HF-AMP1 (O-STD) Addressable Manual Call Point provides a reliable means of manually raising a fire alarm in an emergency. Designed for compatible HikFire addressable fire alarm systems, it enables the control panel to identify the activated device location. Its manual reset mechanism supports convenient resetting after activation.
HikFire Addressable Sounder Strobe HF-ASS1 (O-STD)
HikFire Addressable Sounder Strobe HF-ASS1 (O-STD)
The HikFire HF-ASS1 (O-STD) Addressable Sounder Strobe combines audible and visual alerts in one device for effective fire emergency notification. Designed for compatible HikFire addressable fire alarm systems, it communicates through the addressable bus and provides sound and flashing light when activated.
HikFire Addressable Heat Detector HF-AH1 (O-STD)
HikFire Addressable Heat Detector HF-AH1 (O-STD)
The HikFire HF-AH1 (O-STD) Addressable Heat Detector provides reliable heat detection for fire alarm installations in areas where smoke detectors may be unsuitable. It connects to a compatible addressable fire alarm system, enabling individual device identification and alarm monitoring.
HikFire Addressable Smoke Detector HF-AS1 (O-STD)
HikFire Addressable Smoke Detector HF-AS1 (O-STD)
The HikFire HF-AS1 (O-STD) Addressable Smoke Detector uses photoelectric sensing technology to detect smoke and transmit alarm information to the fire alarm control panel. Its two-wire connection and low standby current make it suitable for commercial, institutional and residential fire protection installations.
HikFire HK-BMQ-8250 Encoder
HikFire HK-BMQ-8250 Encoder
The HikFire HK-BMQ-8250 Electronic Encoder is a professional address programming and testing tool designed for HikFire addressable fire alarm systems. It allows installers and technicians to read and write device addresses, register devices, check duplicate addresses, detect resistance and perform device programming and maintenance.
HikFire Addressable 4 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/4
HikFire Addressable 4 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/4
The HikFire JB-LBZ2-HK8308/4 is a 4-loop addressable fire alarm control and linkage panel designed for centralized fire alarm monitoring, indication and system control. With up to 250 addressable points per loop, the 4-loop configuration supports up to 1,000 addressable devices. The HK8308 series is available in configurations up to 8 loops.
HikFire Addressable 2 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/2
HikFire Addressable 2 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/2
The HikFire JB-LBZ2-HK8308/2 is a 2-loop addressable fire alarm control and linkage panel designed for centralized monitoring, alarm indication and fire-system control. It supports 250 addressable devices per loop, giving a standard capacity of up to 500 addressable points, with the HK8308 family supporting configurations up to 8 loops.
HikFire Addressable 1 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/1
HikFire Addressable 1 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/1
HikFire JB-LBZ2-HK8308/1 Addressable Fire Alarm Control Panel is a reliable 1-loop fire alarm control and linkage panel designed for intelligent fire detection and emergency control. Supporting up to 250 addressable devices on its loop and expandable to 8 loops, it provides centralized monitoring of detectors, manual call points, sounders and interface modules.
HikFire Addressable Fire Display Panel – HK-XS-8016
HikFire Addressable Fire Display Panel – HK-XS-8016
HikFire HK-XS-8016 Addressable Fire Display Panel provides clear local indication of fire alarm events within a monitored area. Featuring a 128 × 64 LCD display, audible and visual alarm indication, and a non-polarity two-wire communication bus, the panel allows personnel to quickly view fire alarm information and identify events. Its compact wall-mounted design makes it suitable for offices, hotels, commercial buildings, industrial facilities and other premises using HikFire addressable fire alarm systems.
HikFire Addressable I/O Module – Active High-Current Pulse Output HK-LD-8022
HikFire Addressable I/O Module – Active Level Output HK-LD-8021
HikFire Addressable I/O Module – Active Level Output HK-LD-8021
HikFire HK-LD-8021 Addressable I/O Module – Active Level Output provides reliable addressable control and monitoring for fire alarm linkage applications. Featuring an active-level output, the module can provide an electrical control signal to connected equipment while communicating with the fire alarm control panel through a two-wire, non-polarity bus. Its separate-base design, LED status indicators, external line monitoring and short-circuit protection make it suitable for integration into HikFire
HikFire Addressable I/O Module – Passive Output HK-LD-8020
HikFire Addressable I/O Module – Passive Output HK-LD-8020
HikFire HK-LD-8020 Addressable I/O Module – Passive Output provides a reliable interface between a HikFire addressable fire alarm system and external fire protection equipment. Featuring passive contact output and NO/NC input, the module can control devices such as electromagnetic valves and exhaust valves while providing equipment status feedback to the fire alarm control panel. Its non-polarity two-wire addressable communication, LED status indication, line break detection and short-circuit protection make it suitable for fire alarm system integration and control applications.
Hikfire Addressable Manual Call Point (J-SAP-HK8010)
Hikfire Addressable Manual Call Point (J-SAP-HK8010)
The HikFire J-SAP-HK8010 provides a dependable means of manually triggering a fire alarm during an emergency. Its addressable communication enables the fire alarm control panel to identify the activated device, supporting faster identification of the alarm location. The resettable mechanism allows the call point to be returned to normal operation after activation.
HikFire Addressable Input Module – Relay Input HK-LD-8023
HikFire Addressable Input Module – Relay Input HK-LD-8023
HikFire HK-LD-8023 Addressable Input Module provides reliable monitoring of external fire protection equipment through relay or dry-contact feedback signals. The module receives status information from devices such as water flow indicators, pressure switches and signal valves, then communicates the condition to the HikFire addressable fire alarm control panel. Its non-polarity two-wire bus, low-power operation, line fault detection and short-circuit protection make it suitable for integration into addressable fire alarm and fire protection systems.
- Low profile, two inches including the base
- Simple and reliable addressing without mechanical switches
- Automatic compensation for sensor contamination
- Built-in fire test feature
- Vandal resistance locking features
- Field cleanable
- IP rating: IP67
- Glass element
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
- Soft addressed
- Integral short circuit isolator
- Single address
- Wide range of sensor types
- 360° visibility LED using lightpipe technology
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
Honeywell Addressable Photoelectric Smoke Detector
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
Menvier Smoke Detector with base (Addressable)
Menvier Smoke Detector with base (Addressable)
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
The HikFire HF-AIM1 (O-STD) Addressable Isolator Module provides short-circuit protection for compatible addressable fire alarm systems. It helps prevent a short circuit in one section of the loop from disrupting communication across the entire system, improving reliability and continuity of fire detection.
HikFire Addressable Manual Call Point HF-AMP1 (O-STD)
HikFire Addressable Manual Call Point HF-AMP1 (O-STD)
The HikFire HF-AMP1 (O-STD) Addressable Manual Call Point provides a reliable means of manually raising a fire alarm in an emergency. Designed for compatible HikFire addressable fire alarm systems, it enables the control panel to identify the activated device location. Its manual reset mechanism supports convenient resetting after activation.
HikFire Addressable Sounder Strobe HF-ASS1 (O-STD)
HikFire Addressable Sounder Strobe HF-ASS1 (O-STD)
The HikFire HF-ASS1 (O-STD) Addressable Sounder Strobe combines audible and visual alerts in one device for effective fire emergency notification. Designed for compatible HikFire addressable fire alarm systems, it communicates through the addressable bus and provides sound and flashing light when activated.
HikFire Addressable Heat Detector HF-AH1 (O-STD)
HikFire Addressable Heat Detector HF-AH1 (O-STD)
The HikFire HF-AH1 (O-STD) Addressable Heat Detector provides reliable heat detection for fire alarm installations in areas where smoke detectors may be unsuitable. It connects to a compatible addressable fire alarm system, enabling individual device identification and alarm monitoring.
HikFire Addressable Smoke Detector HF-AS1 (O-STD)
HikFire Addressable Smoke Detector HF-AS1 (O-STD)
The HikFire HF-AS1 (O-STD) Addressable Smoke Detector uses photoelectric sensing technology to detect smoke and transmit alarm information to the fire alarm control panel. Its two-wire connection and low standby current make it suitable for commercial, institutional and residential fire protection installations.
HikFire HK-BMQ-8250 Encoder
HikFire HK-BMQ-8250 Encoder
The HikFire HK-BMQ-8250 Electronic Encoder is a professional address programming and testing tool designed for HikFire addressable fire alarm systems. It allows installers and technicians to read and write device addresses, register devices, check duplicate addresses, detect resistance and perform device programming and maintenance.
HikFire Addressable 4 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/4
HikFire Addressable 4 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/4
The HikFire JB-LBZ2-HK8308/4 is a 4-loop addressable fire alarm control and linkage panel designed for centralized fire alarm monitoring, indication and system control. With up to 250 addressable points per loop, the 4-loop configuration supports up to 1,000 addressable devices. The HK8308 series is available in configurations up to 8 loops.
HikFire Addressable 2 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/2
HikFire Addressable 2 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/2
The HikFire JB-LBZ2-HK8308/2 is a 2-loop addressable fire alarm control and linkage panel designed for centralized monitoring, alarm indication and fire-system control. It supports 250 addressable devices per loop, giving a standard capacity of up to 500 addressable points, with the HK8308 family supporting configurations up to 8 loops.
HikFire Addressable 1 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/1
HikFire Addressable 1 Loop Fire Alarm Control Panel – JB-LBZ2-HK8308/1
HikFire JB-LBZ2-HK8308/1 Addressable Fire Alarm Control Panel is a reliable 1-loop fire alarm control and linkage panel designed for intelligent fire detection and emergency control. Supporting up to 250 addressable devices on its loop and expandable to 8 loops, it provides centralized monitoring of detectors, manual call points, sounders and interface modules.
HikFire Addressable Fire Display Panel – HK-XS-8016
HikFire Addressable Fire Display Panel – HK-XS-8016
HikFire HK-XS-8016 Addressable Fire Display Panel provides clear local indication of fire alarm events within a monitored area. Featuring a 128 × 64 LCD display, audible and visual alarm indication, and a non-polarity two-wire communication bus, the panel allows personnel to quickly view fire alarm information and identify events. Its compact wall-mounted design makes it suitable for offices, hotels, commercial buildings, industrial facilities and other premises using HikFire addressable fire alarm systems.
HikFire Addressable I/O Module – Active High-Current Pulse Output HK-LD-8022
HikFire Addressable I/O Module – Active Level Output HK-LD-8021
HikFire Addressable I/O Module – Active Level Output HK-LD-8021
HikFire HK-LD-8021 Addressable I/O Module – Active Level Output provides reliable addressable control and monitoring for fire alarm linkage applications. Featuring an active-level output, the module can provide an electrical control signal to connected equipment while communicating with the fire alarm control panel through a two-wire, non-polarity bus. Its separate-base design, LED status indicators, external line monitoring and short-circuit protection make it suitable for integration into HikFire
HikFire Addressable I/O Module – Passive Output HK-LD-8020
HikFire Addressable I/O Module – Passive Output HK-LD-8020
HikFire HK-LD-8020 Addressable I/O Module – Passive Output provides a reliable interface between a HikFire addressable fire alarm system and external fire protection equipment. Featuring passive contact output and NO/NC input, the module can control devices such as electromagnetic valves and exhaust valves while providing equipment status feedback to the fire alarm control panel. Its non-polarity two-wire addressable communication, LED status indication, line break detection and short-circuit protection make it suitable for fire alarm system integration and control applications.
Hikfire Addressable Manual Call Point (J-SAP-HK8010)
Hikfire Addressable Manual Call Point (J-SAP-HK8010)
The HikFire J-SAP-HK8010 provides a dependable means of manually triggering a fire alarm during an emergency. Its addressable communication enables the fire alarm control panel to identify the activated device, supporting faster identification of the alarm location. The resettable mechanism allows the call point to be returned to normal operation after activation.
HikFire Addressable Input Module – Relay Input HK-LD-8023
HikFire Addressable Input Module – Relay Input HK-LD-8023
HikFire HK-LD-8023 Addressable Input Module provides reliable monitoring of external fire protection equipment through relay or dry-contact feedback signals. The module receives status information from devices such as water flow indicators, pressure switches and signal valves, then communicates the condition to the HikFire addressable fire alarm control panel. Its non-polarity two-wire bus, low-power operation, line fault detection and short-circuit protection make it suitable for integration into addressable fire alarm and fire protection systems.
