Informed Systems Store is one of the most trusted and reliable companies in Kenya when it comes to the supply and installation of fire detection equipment such as fire alarms, smoke sensors, and fire fighting equipment. Call us today and schedule a site visit by our field technicians today.
Detection System
A system of sensors and associated interconnected equipment which detects the equipment which detects the presence of fire and provides a warning signal.
Detectors
A properly selected and installed detector can be a highly reliable fire sensor. We provide a full range of fire detection systems.
Smoke Detectors:– Aspirating – Ionization– Optical beam- Optical smoke
Flame Detectors:– Infra-red– Ultra-violet- IR/UV
Thermal (Heat) Detectors:– Fixed temperature- Rate of rise
- Low profile, two inches including the base
- Simple and reliable addressing without mechanical switches
- Automatic compensation for sensor contamination
- Built-in fire test feature
- Vandal resistance locking features
- Field cleanable
- IP rating: IP67
- Glass element
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
- Surface mounting
- Low working current
- LED indicator and buzzer
- No wire connection
- Complete functional test with every activation
- Meets all requirements of latest EN standard.
- High-quality natural rubber lining
- Flexible
- Durable
- Cold resistance
- Soft addressed
- Integral short circuit isolator
- Single address
- Wide range of sensor types
- 360° visibility LED using lightpipe technology
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- Easy to install, mounting bracket included.
- Loud 85 dB alarm and LED warning light.
- High quality durable sensor.
- Self-diagnostic function by MCU intelligent software.
- Excellent reliability and high stability.
- Ideal for all kitchens.
- Electronic linear heat detection
- Remote Indicator output
- Wide voltage range (9.5 ~ 30 V dc)
- Twin fire LEDs allow 360 degree viewing
- Fixed Temperature Detector
- Full range of mounting bases
- Approved by LPCB & VdS
- Also available in white
- Manufactured to EN 1866-1
- CE Marked
- MED Approved – certified for marine use
- Fire extinguisher rating 144B and electrical fires
- Refillable stored pressure unit
- Rubber wheels for easy maneuverability
- Self-supporting stand
- Supplied with 5-meter hose
- Comfortable one-man operation
- MED Approved – certified for marine use
- Extinguisher Rating 55B
- Kitemarked (BS EN3: 1996)
- CE marked and MED approved
- Stored pressure CO2 fire extinguisher
- Lightweight aluminum body
- Our manufacturing process is BAFE certified
- Supplied with: “Lug type” wall bracket
- On-site commissioning and installation available
KSh7,500.00 Excl. VAT
Honeywell Addressable Photoelectric Smoke Detector
SKU: N/A
KSh10,500.00 Excl. VAT
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
SKU: N/AW5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
KSh7,500.00 Excl. VAT
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
SKU: N/AHM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
KSh2,500.00 6KG DRY POWDER EXTINGUISHER
SKU: 536KG DRY POWDER EXTINGUISHER
Use for:
– Organic materials such as:
o Paper and cardboard
o Fabrics and textiles
o Wood and coal
– Flammable liquids, like paint and petrol
– Flammable gases, like liquid petroleum gas (LPG) and acetylene
Plus:
– Fires involving electrical equipment up to 1000v
KSh1,600.00 2Kg Dry Powder Fire Extinguisher
SKU: N/AThe 2Kg Dry Powder Fire Extinguisher is a multi-purpose extinguisher ideal for domestic use and suitable on Class A, B, and C fires involving combustible solids, flammable liquids, and gases.
The highly-rated extinguisher is Mono-Ammonium Phosphate, which is a fine powder that can knock down flames quickly and protect users against the radiant heat from a fire.
Whilst it is safe for use on electrical fires, it should be noted that it can cause contamination of sensitive equipment/environments and corrosion of electrical components if not meticulously cleaned.
KSh3,500.00 9KG Dry Powder Fire Extinguisher
SKU: 529KG Dry Powder Fire Extinguisher
9 Kg Dry Powder Fire Extinguisher utilizes the siliconized sodium bicarbonate to put out the class B and C fires. It forms a cloud and cuts off the oxygen supply that suffocates and breaks the chain of reaction of class B fires and does not conduct electricity back to the user. Its lightweight and easy to use.
KSh6,000.00 Excl. VAT
HikFire LoRa Wireless Smoke Detector NP-FY200
SKU: N/AHikFire LoRa Wireless Smoke Detector NP-FY200
NP-FY200 Photoelectric Smoke Alarm can detect smoke in
the early stage of a fire hazard, and provide warnings by
sending out audible and visual alarm signals. The alarm is
designed for residential and institutional applications
KSh1,500.00 Excl. VAT
Asenware Standalone Heat Detector
SKU: N/AAsenware Standalone Heat Detector
KSh10,500.00 PVC Canvas Delivery Hose
SKU: N/APVC Canvas Delivery Hose
KSh5,000.00 Excl. VAT
Menvier Smoke Detector with base (Addressable)
SKU: 1006Menvier Smoke Detector with base (Addressable)
KSh8,000.00 Excl. VAT
Asenware LPG Gas Leak Detector With shutt off Valve AW-D132
SKU: 926Asenware LPG Gas Leak Detector With shutt off Valve AW-D132
KSh2,700.00 6L Foam Fire Extinguisher
SKU: 10466L Foam Fire Extinguisher
Denoted by a yellow label, foam fire extinguishers extinguish both Class A & B fires which are those that are fuelled by solid materials and flammable liquids, respectively. A foam fire extinguisher discharges a foam solution under pressure that forms a blanket or film on the surface of a burning liquid creating a barrier between the fire vapours and the air necessary to support combustion thereby smothering the fire. They provide a safe, powerful and fast means of extinguishing these class of fires by forming a seal over the surface to prevent re-ignition. Their application areas include: Hospitals, Supermarkets, Hotels and Restaurants, Paint shops, Clothing industries, Industrial units, Offices and many others.
KSh2,500.00 Excl. VAT
Hochiki Conventional heat detector
SKU: 67Hochiki Conventional heat detector
KSh3,300.00 2KG CO2 Fire Extinguisher
SKU: 2992KG CO2 Fire Extinguisher
It ceases fire by removing the oxygen of the fire triangle. They are usually used for Class B and electrical fires and are ineffective in the case of Class A fires. Are common firefighting tools, they are found almost everywhere. Unlike the foam type and powder type extinguishers, they do not leave any irritating foam or residue after extinguishing fire.
KSh17,000.00 10kg CO2 Wheeled Fire Extinguisher
SKU: N/A10kg CO2 Wheeled Fire Extinguisher
Our 10kg CO2 fire extinguishers are for applications with a risk of large electrical fires or flammable liquids. Typical applications include boats, docks, hospitals, paint shops, and industrial units.
KSh4,500.00 Inim ED100 Optical Smoke Detector
SKU: N/AED100
Optical smoke detector
The ED100 optical smoke detector is based on the Tyndall effect (diffusion of light) and provides firstrate early warning in the event of fire.
It offers wide-spectrum detection of smoke particles generated by the majority of fires. The newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen ensure high immunity to false alarms.
The sensitivity can be configured to suit a wide range of applications (sensitivity configurable as: 0.08dB/m; 0.10dB/m; 0.12dB/m; 0.15dB/m).
KSh5,200.00 5Kg CO2 Fire Extinguisher
SKU: N/A5Kg CO2 Fire Extinguisher
KSh20,000.00 Excl. VAT
Hikfire Fire Alarm Loop Board HK8308/8324
SKU: N/AHikfire Fire Alarm Loop Board HK8308/8324
The HikFire HK8308 / HK8324 Loop Board is an electronic expansion and control component designed for compatible HikFire addressable fire alarm control panels. It provides the communication interface between the fire alarm control panel and connected addressable field devices.
The loop board enables the control panel to communicate with compatible smoke detectors, heat detectors, manual call points, sounders and addressable interface modules. It supports reliable device monitoring, alarm signal transmission and system communication.
KSh4,000.00 Excl. VAT
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
SKU: N/AHikFire Addressable Isolator Module HF-AIM1 (O-STD)
The HikFire HF-AIM1 (O-STD) Addressable Isolator Module provides short-circuit protection for compatible addressable fire alarm systems. It helps prevent a short circuit in one section of the loop from disrupting communication across the entire system, improving reliability and continuity of fire detection.
- Low profile, two inches including the base
- Simple and reliable addressing without mechanical switches
- Automatic compensation for sensor contamination
- Built-in fire test feature
- Vandal resistance locking features
- Field cleanable
- IP rating: IP67
- Glass element
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
- Surface mounting
- Low working current
- LED indicator and buzzer
- No wire connection
- Complete functional test with every activation
- Meets all requirements of latest EN standard.
- High-quality natural rubber lining
- Flexible
- Durable
- Cold resistance
- Soft addressed
- Integral short circuit isolator
- Single address
- Wide range of sensor types
- 360° visibility LED using lightpipe technology
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- Easy to install, mounting bracket included.
- Loud 85 dB alarm and LED warning light.
- High quality durable sensor.
- Self-diagnostic function by MCU intelligent software.
- Excellent reliability and high stability.
- Ideal for all kitchens.
- Electronic linear heat detection
- Remote Indicator output
- Wide voltage range (9.5 ~ 30 V dc)
- Twin fire LEDs allow 360 degree viewing
- Fixed Temperature Detector
- Full range of mounting bases
- Approved by LPCB & VdS
- Also available in white
- Manufactured to EN 1866-1
- CE Marked
- MED Approved – certified for marine use
- Fire extinguisher rating 144B and electrical fires
- Refillable stored pressure unit
- Rubber wheels for easy maneuverability
- Self-supporting stand
- Supplied with 5-meter hose
- Comfortable one-man operation
- MED Approved – certified for marine use
- Extinguisher Rating 55B
- Kitemarked (BS EN3: 1996)
- CE marked and MED approved
- Stored pressure CO2 fire extinguisher
- Lightweight aluminum body
- Our manufacturing process is BAFE certified
- Supplied with: “Lug type” wall bracket
- On-site commissioning and installation available
Honeywell Addressable Photoelectric Smoke Detector
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
6KG DRY POWDER EXTINGUISHER
6KG DRY POWDER EXTINGUISHER
Use for:
– Organic materials such as:
o Paper and cardboard
o Fabrics and textiles
o Wood and coal
– Flammable liquids, like paint and petrol
– Flammable gases, like liquid petroleum gas (LPG) and acetylene
Plus:
– Fires involving electrical equipment up to 1000v
2Kg Dry Powder Fire Extinguisher
The 2Kg Dry Powder Fire Extinguisher is a multi-purpose extinguisher ideal for domestic use and suitable on Class A, B, and C fires involving combustible solids, flammable liquids, and gases.
The highly-rated extinguisher is Mono-Ammonium Phosphate, which is a fine powder that can knock down flames quickly and protect users against the radiant heat from a fire.
Whilst it is safe for use on electrical fires, it should be noted that it can cause contamination of sensitive equipment/environments and corrosion of electrical components if not meticulously cleaned.
9KG Dry Powder Fire Extinguisher
9KG Dry Powder Fire Extinguisher
9 Kg Dry Powder Fire Extinguisher utilizes the siliconized sodium bicarbonate to put out the class B and C fires. It forms a cloud and cuts off the oxygen supply that suffocates and breaks the chain of reaction of class B fires and does not conduct electricity back to the user. Its lightweight and easy to use.
HikFire LoRa Wireless Smoke Detector NP-FY200
HikFire LoRa Wireless Smoke Detector NP-FY200
NP-FY200 Photoelectric Smoke Alarm can detect smoke in
the early stage of a fire hazard, and provide warnings by
sending out audible and visual alarm signals. The alarm is
designed for residential and institutional applications
Asenware Standalone Heat Detector
Asenware Standalone Heat Detector
PVC Canvas Delivery Hose
PVC Canvas Delivery Hose
Menvier Smoke Detector with base (Addressable)
Menvier Smoke Detector with base (Addressable)
Asenware LPG Gas Leak Detector With shutt off Valve AW-D132
Asenware LPG Gas Leak Detector With shutt off Valve AW-D132
6L Foam Fire Extinguisher
6L Foam Fire Extinguisher
Denoted by a yellow label, foam fire extinguishers extinguish both Class A & B fires which are those that are fuelled by solid materials and flammable liquids, respectively. A foam fire extinguisher discharges a foam solution under pressure that forms a blanket or film on the surface of a burning liquid creating a barrier between the fire vapours and the air necessary to support combustion thereby smothering the fire. They provide a safe, powerful and fast means of extinguishing these class of fires by forming a seal over the surface to prevent re-ignition. Their application areas include: Hospitals, Supermarkets, Hotels and Restaurants, Paint shops, Clothing industries, Industrial units, Offices and many others.
Hochiki Conventional heat detector
Hochiki Conventional heat detector
2KG CO2 Fire Extinguisher
2KG CO2 Fire Extinguisher
It ceases fire by removing the oxygen of the fire triangle. They are usually used for Class B and electrical fires and are ineffective in the case of Class A fires. Are common firefighting tools, they are found almost everywhere. Unlike the foam type and powder type extinguishers, they do not leave any irritating foam or residue after extinguishing fire.
10kg CO2 Wheeled Fire Extinguisher
10kg CO2 Wheeled Fire Extinguisher
Our 10kg CO2 fire extinguishers are for applications with a risk of large electrical fires or flammable liquids. Typical applications include boats, docks, hospitals, paint shops, and industrial units.
Please Call/SMS +254 793 000 111 to confirm product availability.
KSh17,000.00Inim ED100 Optical Smoke Detector
ED100
Optical smoke detector
The ED100 optical smoke detector is based on the Tyndall effect (diffusion of light) and provides firstrate early warning in the event of fire.
It offers wide-spectrum detection of smoke particles generated by the majority of fires. The newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen ensure high immunity to false alarms.
The sensitivity can be configured to suit a wide range of applications (sensitivity configurable as: 0.08dB/m; 0.10dB/m; 0.12dB/m; 0.15dB/m).
5Kg CO2 Fire Extinguisher
5Kg CO2 Fire Extinguisher
Hikfire Fire Alarm Loop Board HK8308/8324
Hikfire Fire Alarm Loop Board HK8308/8324
The HikFire HK8308 / HK8324 Loop Board is an electronic expansion and control component designed for compatible HikFire addressable fire alarm control panels. It provides the communication interface between the fire alarm control panel and connected addressable field devices.
The loop board enables the control panel to communicate with compatible smoke detectors, heat detectors, manual call points, sounders and addressable interface modules. It supports reliable device monitoring, alarm signal transmission and system communication.
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
The HikFire HF-AIM1 (O-STD) Addressable Isolator Module provides short-circuit protection for compatible addressable fire alarm systems. It helps prevent a short circuit in one section of the loop from disrupting communication across the entire system, improving reliability and continuity of fire detection.
- Low profile, two inches including the base
- Simple and reliable addressing without mechanical switches
- Automatic compensation for sensor contamination
- Built-in fire test feature
- Vandal resistance locking features
- Field cleanable
- IP rating: IP67
- Glass element
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
- Surface mounting
- Low working current
- LED indicator and buzzer
- No wire connection
- Complete functional test with every activation
- Meets all requirements of latest EN standard.
- High-quality natural rubber lining
- Flexible
- Durable
- Cold resistance
- Soft addressed
- Integral short circuit isolator
- Single address
- Wide range of sensor types
- 360° visibility LED using lightpipe technology
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- Easy to install, mounting bracket included.
- Loud 85 dB alarm and LED warning light.
- High quality durable sensor.
- Self-diagnostic function by MCU intelligent software.
- Excellent reliability and high stability.
- Ideal for all kitchens.
- Electronic linear heat detection
- Remote Indicator output
- Wide voltage range (9.5 ~ 30 V dc)
- Twin fire LEDs allow 360 degree viewing
- Fixed Temperature Detector
- Full range of mounting bases
- Approved by LPCB & VdS
- Also available in white
- Manufactured to EN 1866-1
- CE Marked
- MED Approved – certified for marine use
- Fire extinguisher rating 144B and electrical fires
- Refillable stored pressure unit
- Rubber wheels for easy maneuverability
- Self-supporting stand
- Supplied with 5-meter hose
- Comfortable one-man operation
- MED Approved – certified for marine use
- Extinguisher Rating 55B
- Kitemarked (BS EN3: 1996)
- CE marked and MED approved
- Stored pressure CO2 fire extinguisher
- Lightweight aluminum body
- Our manufacturing process is BAFE certified
- Supplied with: “Lug type” wall bracket
- On-site commissioning and installation available
Honeywell Addressable Photoelectric Smoke Detector
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
6KG DRY POWDER EXTINGUISHER
6KG DRY POWDER EXTINGUISHER
Use for:
– Organic materials such as:
o Paper and cardboard
o Fabrics and textiles
o Wood and coal
– Flammable liquids, like paint and petrol
– Flammable gases, like liquid petroleum gas (LPG) and acetylene
Plus:
– Fires involving electrical equipment up to 1000v
2Kg Dry Powder Fire Extinguisher
The 2Kg Dry Powder Fire Extinguisher is a multi-purpose extinguisher ideal for domestic use and suitable on Class A, B, and C fires involving combustible solids, flammable liquids, and gases.
The highly-rated extinguisher is Mono-Ammonium Phosphate, which is a fine powder that can knock down flames quickly and protect users against the radiant heat from a fire.
Whilst it is safe for use on electrical fires, it should be noted that it can cause contamination of sensitive equipment/environments and corrosion of electrical components if not meticulously cleaned.
9KG Dry Powder Fire Extinguisher
9KG Dry Powder Fire Extinguisher
9 Kg Dry Powder Fire Extinguisher utilizes the siliconized sodium bicarbonate to put out the class B and C fires. It forms a cloud and cuts off the oxygen supply that suffocates and breaks the chain of reaction of class B fires and does not conduct electricity back to the user. Its lightweight and easy to use.
HikFire LoRa Wireless Smoke Detector NP-FY200
HikFire LoRa Wireless Smoke Detector NP-FY200
NP-FY200 Photoelectric Smoke Alarm can detect smoke in
the early stage of a fire hazard, and provide warnings by
sending out audible and visual alarm signals. The alarm is
designed for residential and institutional applications
Asenware Standalone Heat Detector
Asenware Standalone Heat Detector
PVC Canvas Delivery Hose
PVC Canvas Delivery Hose
Menvier Smoke Detector with base (Addressable)
Menvier Smoke Detector with base (Addressable)
Asenware LPG Gas Leak Detector With shutt off Valve AW-D132
Asenware LPG Gas Leak Detector With shutt off Valve AW-D132
6L Foam Fire Extinguisher
6L Foam Fire Extinguisher
Denoted by a yellow label, foam fire extinguishers extinguish both Class A & B fires which are those that are fuelled by solid materials and flammable liquids, respectively. A foam fire extinguisher discharges a foam solution under pressure that forms a blanket or film on the surface of a burning liquid creating a barrier between the fire vapours and the air necessary to support combustion thereby smothering the fire. They provide a safe, powerful and fast means of extinguishing these class of fires by forming a seal over the surface to prevent re-ignition. Their application areas include: Hospitals, Supermarkets, Hotels and Restaurants, Paint shops, Clothing industries, Industrial units, Offices and many others.
Hochiki Conventional heat detector
Hochiki Conventional heat detector
2KG CO2 Fire Extinguisher
2KG CO2 Fire Extinguisher
It ceases fire by removing the oxygen of the fire triangle. They are usually used for Class B and electrical fires and are ineffective in the case of Class A fires. Are common firefighting tools, they are found almost everywhere. Unlike the foam type and powder type extinguishers, they do not leave any irritating foam or residue after extinguishing fire.
10kg CO2 Wheeled Fire Extinguisher
10kg CO2 Wheeled Fire Extinguisher
Our 10kg CO2 fire extinguishers are for applications with a risk of large electrical fires or flammable liquids. Typical applications include boats, docks, hospitals, paint shops, and industrial units.
Please Call/SMS +254 793 000 111 to confirm product availability.
KSh17,000.00Inim ED100 Optical Smoke Detector
ED100
Optical smoke detector
The ED100 optical smoke detector is based on the Tyndall effect (diffusion of light) and provides firstrate early warning in the event of fire.
It offers wide-spectrum detection of smoke particles generated by the majority of fires. The newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen ensure high immunity to false alarms.
The sensitivity can be configured to suit a wide range of applications (sensitivity configurable as: 0.08dB/m; 0.10dB/m; 0.12dB/m; 0.15dB/m).
5Kg CO2 Fire Extinguisher
5Kg CO2 Fire Extinguisher
Hikfire Fire Alarm Loop Board HK8308/8324
Hikfire Fire Alarm Loop Board HK8308/8324
The HikFire HK8308 / HK8324 Loop Board is an electronic expansion and control component designed for compatible HikFire addressable fire alarm control panels. It provides the communication interface between the fire alarm control panel and connected addressable field devices.
The loop board enables the control panel to communicate with compatible smoke detectors, heat detectors, manual call points, sounders and addressable interface modules. It supports reliable device monitoring, alarm signal transmission and system communication.
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
The HikFire HF-AIM1 (O-STD) Addressable Isolator Module provides short-circuit protection for compatible addressable fire alarm systems. It helps prevent a short circuit in one section of the loop from disrupting communication across the entire system, improving reliability and continuity of fire detection.
- Low profile, two inches including the base
- Simple and reliable addressing without mechanical switches
- Automatic compensation for sensor contamination
- Built-in fire test feature
- Vandal resistance locking features
- Field cleanable
- IP rating: IP67
- Glass element
- Wiring: 2 wires
- Operating Voltage: 24 VDC
- Dual LEDs – 360° vision
- Measurements: 9.9cm x 4.5cm (without base)
- Complies with European Regulations – EN54
- Surface mounting
- Low working current
- LED indicator and buzzer
- No wire connection
- Complete functional test with every activation
- Meets all requirements of latest EN standard.
- High-quality natural rubber lining
- Flexible
- Durable
- Cold resistance
- Soft addressed
- Integral short circuit isolator
- Single address
- Wide range of sensor types
- 360° visibility LED using lightpipe technology
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- Easy to install, mounting bracket included.
- Loud 85 dB alarm and LED warning light.
- High quality durable sensor.
- Self-diagnostic function by MCU intelligent software.
- Excellent reliability and high stability.
- Ideal for all kitchens.
- Electronic linear heat detection
- Remote Indicator output
- Wide voltage range (9.5 ~ 30 V dc)
- Twin fire LEDs allow 360 degree viewing
- Fixed Temperature Detector
- Full range of mounting bases
- Approved by LPCB & VdS
- Also available in white
- Manufactured to EN 1866-1
- CE Marked
- MED Approved – certified for marine use
- Fire extinguisher rating 144B and electrical fires
- Refillable stored pressure unit
- Rubber wheels for easy maneuverability
- Self-supporting stand
- Supplied with 5-meter hose
- Comfortable one-man operation
- MED Approved – certified for marine use
- Extinguisher Rating 55B
- Kitemarked (BS EN3: 1996)
- CE marked and MED approved
- Stored pressure CO2 fire extinguisher
- Lightweight aluminum body
- Our manufacturing process is BAFE certified
- Supplied with: “Lug type” wall bracket
- On-site commissioning and installation available
Honeywell Addressable Photoelectric Smoke Detector
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
W5A-RPO5SF-K013 Morley IAS Addressable Glass Weatherproof Call Point
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
HM-RHSE Honeywell Addressable Heat Detector with base Hna-360-H2
6KG DRY POWDER EXTINGUISHER
6KG DRY POWDER EXTINGUISHER
Use for:
– Organic materials such as:
o Paper and cardboard
o Fabrics and textiles
o Wood and coal
– Flammable liquids, like paint and petrol
– Flammable gases, like liquid petroleum gas (LPG) and acetylene
Plus:
– Fires involving electrical equipment up to 1000v
2Kg Dry Powder Fire Extinguisher
The 2Kg Dry Powder Fire Extinguisher is a multi-purpose extinguisher ideal for domestic use and suitable on Class A, B, and C fires involving combustible solids, flammable liquids, and gases.
The highly-rated extinguisher is Mono-Ammonium Phosphate, which is a fine powder that can knock down flames quickly and protect users against the radiant heat from a fire.
Whilst it is safe for use on electrical fires, it should be noted that it can cause contamination of sensitive equipment/environments and corrosion of electrical components if not meticulously cleaned.
9KG Dry Powder Fire Extinguisher
9KG Dry Powder Fire Extinguisher
9 Kg Dry Powder Fire Extinguisher utilizes the siliconized sodium bicarbonate to put out the class B and C fires. It forms a cloud and cuts off the oxygen supply that suffocates and breaks the chain of reaction of class B fires and does not conduct electricity back to the user. Its lightweight and easy to use.
HikFire LoRa Wireless Smoke Detector NP-FY200
HikFire LoRa Wireless Smoke Detector NP-FY200
NP-FY200 Photoelectric Smoke Alarm can detect smoke in
the early stage of a fire hazard, and provide warnings by
sending out audible and visual alarm signals. The alarm is
designed for residential and institutional applications
Asenware Standalone Heat Detector
Asenware Standalone Heat Detector
PVC Canvas Delivery Hose
PVC Canvas Delivery Hose
Menvier Smoke Detector with base (Addressable)
Menvier Smoke Detector with base (Addressable)
Asenware LPG Gas Leak Detector With shutt off Valve AW-D132
Asenware LPG Gas Leak Detector With shutt off Valve AW-D132
6L Foam Fire Extinguisher
6L Foam Fire Extinguisher
Denoted by a yellow label, foam fire extinguishers extinguish both Class A & B fires which are those that are fuelled by solid materials and flammable liquids, respectively. A foam fire extinguisher discharges a foam solution under pressure that forms a blanket or film on the surface of a burning liquid creating a barrier between the fire vapours and the air necessary to support combustion thereby smothering the fire. They provide a safe, powerful and fast means of extinguishing these class of fires by forming a seal over the surface to prevent re-ignition. Their application areas include: Hospitals, Supermarkets, Hotels and Restaurants, Paint shops, Clothing industries, Industrial units, Offices and many others.
Hochiki Conventional heat detector
Hochiki Conventional heat detector
2KG CO2 Fire Extinguisher
2KG CO2 Fire Extinguisher
It ceases fire by removing the oxygen of the fire triangle. They are usually used for Class B and electrical fires and are ineffective in the case of Class A fires. Are common firefighting tools, they are found almost everywhere. Unlike the foam type and powder type extinguishers, they do not leave any irritating foam or residue after extinguishing fire.
10kg CO2 Wheeled Fire Extinguisher
10kg CO2 Wheeled Fire Extinguisher
Our 10kg CO2 fire extinguishers are for applications with a risk of large electrical fires or flammable liquids. Typical applications include boats, docks, hospitals, paint shops, and industrial units.
Inim ED100 Optical Smoke Detector
ED100
Optical smoke detector
The ED100 optical smoke detector is based on the Tyndall effect (diffusion of light) and provides firstrate early warning in the event of fire.
It offers wide-spectrum detection of smoke particles generated by the majority of fires. The newly designed optical chamber with sealed upper-part and 500 μm holes diameter mesh insect screen ensure high immunity to false alarms.
The sensitivity can be configured to suit a wide range of applications (sensitivity configurable as: 0.08dB/m; 0.10dB/m; 0.12dB/m; 0.15dB/m).
5Kg CO2 Fire Extinguisher
5Kg CO2 Fire Extinguisher
Hikfire Fire Alarm Loop Board HK8308/8324
Hikfire Fire Alarm Loop Board HK8308/8324
The HikFire HK8308 / HK8324 Loop Board is an electronic expansion and control component designed for compatible HikFire addressable fire alarm control panels. It provides the communication interface between the fire alarm control panel and connected addressable field devices.
The loop board enables the control panel to communicate with compatible smoke detectors, heat detectors, manual call points, sounders and addressable interface modules. It supports reliable device monitoring, alarm signal transmission and system communication.
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
HikFire Addressable Isolator Module HF-AIM1 (O-STD)
The HikFire HF-AIM1 (O-STD) Addressable Isolator Module provides short-circuit protection for compatible addressable fire alarm systems. It helps prevent a short circuit in one section of the loop from disrupting communication across the entire system, improving reliability and continuity of fire detection.
