- Loop powered
- Soft addressed
- Integral short circuit Isolator
- Single address
- Reflective beam detection
- Quick and simple to setup
- Saves on both time and installation costs
- No power supply required
- Single device to install instead of numerous point detectors
- Single point of maintenance
- Wall mounted for ease of maintenance, especially in warehouses with racking
- 1 x Detector Head Assembly
- 4 x Prism for the MAB100R
- 1 x Dual Test Filter
- 1 x 4-way Connector for in line wiring
- 1 x 4-way Connector for right angle wiring
- Loop powered
- Soft addressed
- Integral short circuit Isolator
- Single address
- Reflective beam detection
- Quick and simple to setup
- Saves on both time and installation costs
- No power supply required
- Single device to install instead of numerous point detectors
- Single point of maintenance
- Wall mounted for ease of maintenance, especially in warehouses with racking
- 1 x Detector Head Assembly
- 1 x Prism for the MAB50R
- 1 x Dual Test Filter
- 1 x 4-way Connector for in line wiring
- 1 x 4-way Connector for right angle wiring
- It is modularized design, the panel can expend from 1 zone to 32 zones easily.
- It has 2 level control mode by a lock
- It has 24VDC and 5VDC power supply output.
- It has FIRE and FAULT signal output.
- It has 2 general sounders output.
- Each zone has 1 circuit detectors input .Each zone can be disable by a button.
- It has RESET button to reset the panel.
- It has SILENCE button to stop BUZZER and SOUNDERS.
- It has EVACUATE button to start a manual fire alarm immediately.
- It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.It
- has an optional GSM module for fire alarm by SMS .
- Simplifies and speeds up installation and commissioning
- Uses patented proven technology
- The address remains the same, no matter how often detectors are replaced
- Flexibility to create any address
- Meet both EN54-3 and EN54 -23.
- Designed with an upper cover and a lower cover and installed on an independent base, it can be installed, debugged and maintained conveniently.
- Suitable for wall and ceiling mount application.
- Providing 16 tones.
- Highly efficient LED technology and specially designed lens.
- Light output synchronization.
- Electrochemical sensor technology detects CO gas.
- Easy installation, no wiring needed, detects during a power failure by operating on 2-AA batteries (included).
- Conveniently designed & portable: simple to install on a wall of your home or place on a tabletop.
- Green LED indicates power to the smoke detector, while an 85-decibel alarm & a red LED indicates the presence of carbon monoxide.
- Peak Level Memory records the last time carbon monoxide was detected or when the unit was last tested.
- Test-Hush button makes it easy to test the carbon monoxide detector or temporarily silence the low battery chirp warning.
- 32 tones (user selectable)
- 12V or 24V
- Secure clip fit base
- Volume control
- Fire approved and Signalling tone options
- For Fire, Security and Signalling
- Quick fitting for easy installation
- Reduce output to suit application
- Quick and simple to install | High sound output
- Low current consumption
- Multi-fixing base plate
- IP42 rated | Can be used for non fire applications
- Surface or flush mountable
- · Fast fit clip on front cover
- · Quick & simple to install
- · Single tool for testing and accessing the call point
- no wire connection
- 360° visibility LED using light pipe technology
- Wide range of detector types
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- Low profile design
- 360° viewable LED design
- Removable detector chamber for cleaning
- New enhanced detectors feature Dual LEDs,
- Drift compensation and Chamber monitoring (Optical & Photo-Thermal)
- Flexible high specification system
- Very easy to maintain and service
- Suitable for a large range of projects
- No fuses required
- Maintenance free poly switch circuit protection with auto reset
- Class change and programmable fire/fault relay as standard on 2/4 zone
- Discreet panel design
- Numerical access code (no lock keys)
- Supplied complete with battery for 24 hour standby
- Polycarbonate housing
- Flexible high specification system
- Very easy to maintain and service
- Suitable for a large range of projects
- No fuses required
- Maintenance free poly switch circuit protection with auto reset
- Class change and programmable fire/fault relay as standard on 2/4 zone
- Discreet panel design
- Numerical access code (no lock keys)
- Supplied complete with battery for 24 hour standby
- Polycarbonate housing
- High pressure
- Can carry fire retardants such as water and foam
- Made of good material and is durable
- Can be used both indoors and outdoors
- Red Call Point
- 470 Ohm
- No LED
- Resettable plate insert
- Surface mount
- 87 x 87 x 53mm
- MX004: Resettable plate insert replacements (pack of 10)
KSh140,000.00 Excl. VAT
Cooper Menvier MAB100R Addressable Reflective Beam Detector (100m Range)
SKU: N/ACooper Menvier MAB100R Addressable Reflective Beam Detector (100m Range)
Kit Contains:
KSh115,000.00 Excl. VAT
Cooper Menvier MAB50R Addressable Reflective Beam Detector (50m Range)
SKU: N/ACooper Menvier MAB50R Addressable Reflective Beam Detector (50m Range)
Kit Contains:
KSh37,500.00 Excl. VAT
Asenware AW-CFP2166 16 Zone Conventional Fire Panel
SKU: N/AAsenware AW-CFP2166 16 Zone Conventional Fire Panel
KSh1,900.00 Excl. VAT
Addressable Address Card
SKU: N/AAddressable Address Card
KSh2,000.00 Excl. VAT
Asenware Aw-Css2166-2 Conventional Fire Alarm Horn Strobe with flash
SKU: N/AAsenware Aw-Css2166-2 Conventional Fire Alarm Horn Strobe with flash
Flash Intensity:≥1.2 Ws
Flash Light Lifespan:≥40000 Time
Flash Period:≤1.5 S
Color: Red
Work Current:40mA~60mA
Operating Voltage: DC16-DC30 V
KSh4,500.00 Excl. VAT
AW-D316 CONVENTIONAL SOUNDER BEACON
SKU: N/AAW-D316 CONVENTIONAL SOUNDER BEACON
KSh14,000.00 Carbon Monoxide Alarm Detector
SKU: N/ACarbon Monoxide Alarm Detector
KSh8,500.00 Excl. VAT
Reflective Fire Exit Sign
SKU: IFS20210626021Reflective Fire exit signs are used to clearly inform occupants of a building of the nearest emergency exits, safe evacuation route and general evacuation procedures.
Order Fire exit signs from Informed Store the leading safety equipment supplier in Kenya today at a discounted price.
KSh6,500.00 Excl. VAT
Menvier Conventional combined Fire Alarm Sounder and Strobe Light at 100dB(A) Max at 1m complete with mounting base
SKU: N/AMenvier Conventional combined Fire Alarm Sounder and Strobe Light at 100dB(A) Max at 1m complete with mounting base
KSh4,500.00 Excl. VAT
Menvier Conventional Bell
SKU: N/AMenvier Conventional Bell
KSh3,000.00 Excl. VAT
Menvier Conventional Manual Call Point
SKU: N/AMenvier Conventional Manual Call Point
KSh3,500.00 Excl. VAT
Menvier Conventional Heat Detector with Base
SKU: N/AMenvier Conventional Heat Detector with Base
KSh3,500.00 Excl. VAT
Menvier Conventional Smoke Detector with Base
SKU: N/AMenvier Conventional Smoke Detector with Base
KSh35,000.00 Excl. VAT
Cooper Menvier Conventional 2 zone Fire Panel
SKU: N/ACooper Menvier Conventional 2 zone Fire Panel
KSh45,000.00 Excl. VAT
Cooper Menvier Conventional 4 zone Fire Panel
SKU: N/ACooper Menvier Conventional 4 zone Fire Panel
KSh21,000.00 Durable Rubber-Lined red Delivery Hose (2.5MM 30M)
SKU: N/ADURABLE RUBBER-LINED RED DELIVERY HOSE (2.5MM 30M)
KSh4,500.00 Excl. VAT
Asenware Conventional Fire Strobe Sounder aw-css2166-4
SKU: N/AAsenware Conventional Fire Strobe Sounder aw-css2166-4
Weather-proof conventional fire strobe sounder is powered by a 24v electrical circuit. In the event of a fire, the sounder will sound and flash at the same time. Very stable and reliable; easy to install and wire; can be used in different emergency situations.
KSh1,500.00 Excl. VAT
RESETTABLE FIRE MANUAL CALL POINT RED (CA-A002R)
SKU: 804RESETTABLE FIRE MANUAL CALL POINT RED (CA-A002R)
KSh38,000.00 Fire Hydrant Valve Complete With 2way inlet Valves
SKU: 711Fire Hydrant Valve Complete With 2way inlet Valves
●Material:Cast iron/Dutile iron
●Inlet: 4” BS 4504 / 4” table E /4” ANSI 150#
●Outlet:2.5” female BS instantaneous
●Working pressure:20bar
KSh11,500.00 2.5” Brass Landing Valve Screw
SKU: 7092.5” Brass Landing Valve Screw
| Usage/Application |
Fire Safety
|
| Valve Type |
Screwed
|
| Size |
2.5inch(Height)
|
| Material |
Brass
|
| Automation Grade |
Manual
|
| Pressure |
48 Bar
|
| Number Of Head |
Single
|
buy at discounted price at our shop in Nairobi, Kenya
- Loop powered
- Soft addressed
- Integral short circuit Isolator
- Single address
- Reflective beam detection
- Quick and simple to setup
- Saves on both time and installation costs
- No power supply required
- Single device to install instead of numerous point detectors
- Single point of maintenance
- Wall mounted for ease of maintenance, especially in warehouses with racking
- 1 x Detector Head Assembly
- 4 x Prism for the MAB100R
- 1 x Dual Test Filter
- 1 x 4-way Connector for in line wiring
- 1 x 4-way Connector for right angle wiring
- Loop powered
- Soft addressed
- Integral short circuit Isolator
- Single address
- Reflective beam detection
- Quick and simple to setup
- Saves on both time and installation costs
- No power supply required
- Single device to install instead of numerous point detectors
- Single point of maintenance
- Wall mounted for ease of maintenance, especially in warehouses with racking
- 1 x Detector Head Assembly
- 1 x Prism for the MAB50R
- 1 x Dual Test Filter
- 1 x 4-way Connector for in line wiring
- 1 x 4-way Connector for right angle wiring
- It is modularized design, the panel can expend from 1 zone to 32 zones easily.
- It has 2 level control mode by a lock
- It has 24VDC and 5VDC power supply output.
- It has FIRE and FAULT signal output.
- It has 2 general sounders output.
- Each zone has 1 circuit detectors input .Each zone can be disable by a button.
- It has RESET button to reset the panel.
- It has SILENCE button to stop BUZZER and SOUNDERS.
- It has EVACUATE button to start a manual fire alarm immediately.
- It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.It
- has an optional GSM module for fire alarm by SMS .
- Simplifies and speeds up installation and commissioning
- Uses patented proven technology
- The address remains the same, no matter how often detectors are replaced
- Flexibility to create any address
- Meet both EN54-3 and EN54 -23.
- Designed with an upper cover and a lower cover and installed on an independent base, it can be installed, debugged and maintained conveniently.
- Suitable for wall and ceiling mount application.
- Providing 16 tones.
- Highly efficient LED technology and specially designed lens.
- Light output synchronization.
- Electrochemical sensor technology detects CO gas.
- Easy installation, no wiring needed, detects during a power failure by operating on 2-AA batteries (included).
- Conveniently designed & portable: simple to install on a wall of your home or place on a tabletop.
- Green LED indicates power to the smoke detector, while an 85-decibel alarm & a red LED indicates the presence of carbon monoxide.
- Peak Level Memory records the last time carbon monoxide was detected or when the unit was last tested.
- Test-Hush button makes it easy to test the carbon monoxide detector or temporarily silence the low battery chirp warning.
- 32 tones (user selectable)
- 12V or 24V
- Secure clip fit base
- Volume control
- Fire approved and Signalling tone options
- For Fire, Security and Signalling
- Quick fitting for easy installation
- Reduce output to suit application
- Quick and simple to install | High sound output
- Low current consumption
- Multi-fixing base plate
- IP42 rated | Can be used for non fire applications
- Surface or flush mountable
- · Fast fit clip on front cover
- · Quick & simple to install
- · Single tool for testing and accessing the call point
- no wire connection
- 360° visibility LED using light pipe technology
- Wide range of detector types
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- Low profile design
- 360° viewable LED design
- Removable detector chamber for cleaning
- New enhanced detectors feature Dual LEDs,
- Drift compensation and Chamber monitoring (Optical & Photo-Thermal)
- Flexible high specification system
- Very easy to maintain and service
- Suitable for a large range of projects
- No fuses required
- Maintenance free poly switch circuit protection with auto reset
- Class change and programmable fire/fault relay as standard on 2/4 zone
- Discreet panel design
- Numerical access code (no lock keys)
- Supplied complete with battery for 24 hour standby
- Polycarbonate housing
- Flexible high specification system
- Very easy to maintain and service
- Suitable for a large range of projects
- No fuses required
- Maintenance free poly switch circuit protection with auto reset
- Class change and programmable fire/fault relay as standard on 2/4 zone
- Discreet panel design
- Numerical access code (no lock keys)
- Supplied complete with battery for 24 hour standby
- Polycarbonate housing
- High pressure
- Can carry fire retardants such as water and foam
- Made of good material and is durable
- Can be used both indoors and outdoors
- Red Call Point
- 470 Ohm
- No LED
- Resettable plate insert
- Surface mount
- 87 x 87 x 53mm
- MX004: Resettable plate insert replacements (pack of 10)

Cooper Menvier MAB100R Addressable Reflective Beam Detector (100m Range)
Cooper Menvier MAB100R Addressable Reflective Beam Detector (100m Range)
Kit Contains:

Cooper Menvier MAB50R Addressable Reflective Beam Detector (50m Range)
Cooper Menvier MAB50R Addressable Reflective Beam Detector (50m Range)
Kit Contains:

Asenware AW-CFP2166 16 Zone Conventional Fire Panel
Asenware AW-CFP2166 16 Zone Conventional Fire Panel

Addressable Address Card
Addressable Address Card

Asenware Aw-Css2166-2 Conventional Fire Alarm Horn Strobe with flash
Asenware Aw-Css2166-2 Conventional Fire Alarm Horn Strobe with flash
Flash Intensity:≥1.2 Ws
Flash Light Lifespan:≥40000 Time
Flash Period:≤1.5 S
Color: Red
Work Current:40mA~60mA
Operating Voltage: DC16-DC30 V

AW-D316 CONVENTIONAL SOUNDER BEACON
AW-D316 CONVENTIONAL SOUNDER BEACON

Carbon Monoxide Alarm Detector
Carbon Monoxide Alarm Detector

Reflective Fire Exit Sign
Reflective Fire exit signs are used to clearly inform occupants of a building of the nearest emergency exits, safe evacuation route and general evacuation procedures.
Order Fire exit signs from Informed Store the leading safety equipment supplier in Kenya today at a discounted price.

Menvier Conventional combined Fire Alarm Sounder and Strobe Light at 100dB(A) Max at 1m complete with mounting base
Menvier Conventional combined Fire Alarm Sounder and Strobe Light at 100dB(A) Max at 1m complete with mounting base

Menvier Conventional Bell
Menvier Conventional Bell

Menvier Conventional Manual Call Point
Menvier Conventional Manual Call Point

Menvier Conventional Heat Detector with Base
Menvier Conventional Heat Detector with Base

Menvier Conventional Smoke Detector with Base
Menvier Conventional Smoke Detector with Base

Cooper Menvier Conventional 2 zone Fire Panel
Cooper Menvier Conventional 2 zone Fire Panel

Cooper Menvier Conventional 4 zone Fire Panel
Cooper Menvier Conventional 4 zone Fire Panel

Durable Rubber-Lined red Delivery Hose (2.5MM 30M)
DURABLE RUBBER-LINED RED DELIVERY HOSE (2.5MM 30M)

Asenware Conventional Fire Strobe Sounder aw-css2166-4
Asenware Conventional Fire Strobe Sounder aw-css2166-4
Weather-proof conventional fire strobe sounder is powered by a 24v electrical circuit. In the event of a fire, the sounder will sound and flash at the same time. Very stable and reliable; easy to install and wire; can be used in different emergency situations.

RESETTABLE FIRE MANUAL CALL POINT RED (CA-A002R)
RESETTABLE FIRE MANUAL CALL POINT RED (CA-A002R)

Fire Hydrant Valve Complete With 2way inlet Valves
Fire Hydrant Valve Complete With 2way inlet Valves
●Material:Cast iron/Dutile iron
●Inlet: 4” BS 4504 / 4” table E /4” ANSI 150#
●Outlet:2.5” female BS instantaneous
●Working pressure:20bar

2.5” Brass Landing Valve Screw
2.5” Brass Landing Valve Screw
| Usage/Application |
Fire Safety
|
| Valve Type |
Screwed
|
| Size |
2.5inch(Height)
|
| Material |
Brass
|
| Automation Grade |
Manual
|
| Pressure |
48 Bar
|
| Number Of Head |
Single
|
buy at discounted price at our shop in Nairobi, Kenya
- Loop powered
- Soft addressed
- Integral short circuit Isolator
- Single address
- Reflective beam detection
- Quick and simple to setup
- Saves on both time and installation costs
- No power supply required
- Single device to install instead of numerous point detectors
- Single point of maintenance
- Wall mounted for ease of maintenance, especially in warehouses with racking
- 1 x Detector Head Assembly
- 4 x Prism for the MAB100R
- 1 x Dual Test Filter
- 1 x 4-way Connector for in line wiring
- 1 x 4-way Connector for right angle wiring
- Loop powered
- Soft addressed
- Integral short circuit Isolator
- Single address
- Reflective beam detection
- Quick and simple to setup
- Saves on both time and installation costs
- No power supply required
- Single device to install instead of numerous point detectors
- Single point of maintenance
- Wall mounted for ease of maintenance, especially in warehouses with racking
- 1 x Detector Head Assembly
- 1 x Prism for the MAB50R
- 1 x Dual Test Filter
- 1 x 4-way Connector for in line wiring
- 1 x 4-way Connector for right angle wiring
- It is modularized design, the panel can expend from 1 zone to 32 zones easily.
- It has 2 level control mode by a lock
- It has 24VDC and 5VDC power supply output.
- It has FIRE and FAULT signal output.
- It has 2 general sounders output.
- Each zone has 1 circuit detectors input .Each zone can be disable by a button.
- It has RESET button to reset the panel.
- It has SILENCE button to stop BUZZER and SOUNDERS.
- It has EVACUATE button to start a manual fire alarm immediately.
- It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.It
- has an optional GSM module for fire alarm by SMS .
- Simplifies and speeds up installation and commissioning
- Uses patented proven technology
- The address remains the same, no matter how often detectors are replaced
- Flexibility to create any address
- Meet both EN54-3 and EN54 -23.
- Designed with an upper cover and a lower cover and installed on an independent base, it can be installed, debugged and maintained conveniently.
- Suitable for wall and ceiling mount application.
- Providing 16 tones.
- Highly efficient LED technology and specially designed lens.
- Light output synchronization.
- Electrochemical sensor technology detects CO gas.
- Easy installation, no wiring needed, detects during a power failure by operating on 2-AA batteries (included).
- Conveniently designed & portable: simple to install on a wall of your home or place on a tabletop.
- Green LED indicates power to the smoke detector, while an 85-decibel alarm & a red LED indicates the presence of carbon monoxide.
- Peak Level Memory records the last time carbon monoxide was detected or when the unit was last tested.
- Test-Hush button makes it easy to test the carbon monoxide detector or temporarily silence the low battery chirp warning.
- 32 tones (user selectable)
- 12V or 24V
- Secure clip fit base
- Volume control
- Fire approved and Signalling tone options
- For Fire, Security and Signalling
- Quick fitting for easy installation
- Reduce output to suit application
- Quick and simple to install | High sound output
- Low current consumption
- Multi-fixing base plate
- IP42 rated | Can be used for non fire applications
- Surface or flush mountable
- · Fast fit clip on front cover
- · Quick & simple to install
- · Single tool for testing and accessing the call point
- no wire connection
- 360° visibility LED using light pipe technology
- Wide range of detector types
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- Low profile design
- 360° viewable LED design
- Removable detector chamber for cleaning
- New enhanced detectors feature Dual LEDs,
- Drift compensation and Chamber monitoring (Optical & Photo-Thermal)
- Flexible high specification system
- Very easy to maintain and service
- Suitable for a large range of projects
- No fuses required
- Maintenance free poly switch circuit protection with auto reset
- Class change and programmable fire/fault relay as standard on 2/4 zone
- Discreet panel design
- Numerical access code (no lock keys)
- Supplied complete with battery for 24 hour standby
- Polycarbonate housing
- Flexible high specification system
- Very easy to maintain and service
- Suitable for a large range of projects
- No fuses required
- Maintenance free poly switch circuit protection with auto reset
- Class change and programmable fire/fault relay as standard on 2/4 zone
- Discreet panel design
- Numerical access code (no lock keys)
- Supplied complete with battery for 24 hour standby
- Polycarbonate housing
- High pressure
- Can carry fire retardants such as water and foam
- Made of good material and is durable
- Can be used both indoors and outdoors
- Red Call Point
- 470 Ohm
- No LED
- Resettable plate insert
- Surface mount
- 87 x 87 x 53mm
- MX004: Resettable plate insert replacements (pack of 10)

Cooper Menvier MAB100R Addressable Reflective Beam Detector (100m Range)
Cooper Menvier MAB100R Addressable Reflective Beam Detector (100m Range)
Kit Contains:

Cooper Menvier MAB50R Addressable Reflective Beam Detector (50m Range)
Cooper Menvier MAB50R Addressable Reflective Beam Detector (50m Range)
Kit Contains:

Asenware AW-CFP2166 16 Zone Conventional Fire Panel
Asenware AW-CFP2166 16 Zone Conventional Fire Panel

Addressable Address Card
Addressable Address Card

Asenware Aw-Css2166-2 Conventional Fire Alarm Horn Strobe with flash
Asenware Aw-Css2166-2 Conventional Fire Alarm Horn Strobe with flash
Flash Intensity:≥1.2 Ws
Flash Light Lifespan:≥40000 Time
Flash Period:≤1.5 S
Color: Red
Work Current:40mA~60mA
Operating Voltage: DC16-DC30 V

AW-D316 CONVENTIONAL SOUNDER BEACON
AW-D316 CONVENTIONAL SOUNDER BEACON

Carbon Monoxide Alarm Detector
Carbon Monoxide Alarm Detector

Reflective Fire Exit Sign
Reflective Fire exit signs are used to clearly inform occupants of a building of the nearest emergency exits, safe evacuation route and general evacuation procedures.
Order Fire exit signs from Informed Store the leading safety equipment supplier in Kenya today at a discounted price.

Menvier Conventional combined Fire Alarm Sounder and Strobe Light at 100dB(A) Max at 1m complete with mounting base
Menvier Conventional combined Fire Alarm Sounder and Strobe Light at 100dB(A) Max at 1m complete with mounting base

Menvier Conventional Bell
Menvier Conventional Bell

Menvier Conventional Manual Call Point
Menvier Conventional Manual Call Point

Menvier Conventional Heat Detector with Base
Menvier Conventional Heat Detector with Base

Menvier Conventional Smoke Detector with Base
Menvier Conventional Smoke Detector with Base

Cooper Menvier Conventional 2 zone Fire Panel
Cooper Menvier Conventional 2 zone Fire Panel

Cooper Menvier Conventional 4 zone Fire Panel
Cooper Menvier Conventional 4 zone Fire Panel

Durable Rubber-Lined red Delivery Hose (2.5MM 30M)
DURABLE RUBBER-LINED RED DELIVERY HOSE (2.5MM 30M)

Asenware Conventional Fire Strobe Sounder aw-css2166-4
Asenware Conventional Fire Strobe Sounder aw-css2166-4
Weather-proof conventional fire strobe sounder is powered by a 24v electrical circuit. In the event of a fire, the sounder will sound and flash at the same time. Very stable and reliable; easy to install and wire; can be used in different emergency situations.

RESETTABLE FIRE MANUAL CALL POINT RED (CA-A002R)
RESETTABLE FIRE MANUAL CALL POINT RED (CA-A002R)

Fire Hydrant Valve Complete With 2way inlet Valves
Fire Hydrant Valve Complete With 2way inlet Valves
●Material:Cast iron/Dutile iron
●Inlet: 4” BS 4504 / 4” table E /4” ANSI 150#
●Outlet:2.5” female BS instantaneous
●Working pressure:20bar

2.5” Brass Landing Valve Screw
2.5” Brass Landing Valve Screw
| Usage/Application |
Fire Safety
|
| Valve Type |
Screwed
|
| Size |
2.5inch(Height)
|
| Material |
Brass
|
| Automation Grade |
Manual
|
| Pressure |
48 Bar
|
| Number Of Head |
Single
|
buy at discounted price at our shop in Nairobi, Kenya
- Loop powered
- Soft addressed
- Integral short circuit Isolator
- Single address
- Reflective beam detection
- Quick and simple to setup
- Saves on both time and installation costs
- No power supply required
- Single device to install instead of numerous point detectors
- Single point of maintenance
- Wall mounted for ease of maintenance, especially in warehouses with racking
- 1 x Detector Head Assembly
- 4 x Prism for the MAB100R
- 1 x Dual Test Filter
- 1 x 4-way Connector for in line wiring
- 1 x 4-way Connector for right angle wiring
- Loop powered
- Soft addressed
- Integral short circuit Isolator
- Single address
- Reflective beam detection
- Quick and simple to setup
- Saves on both time and installation costs
- No power supply required
- Single device to install instead of numerous point detectors
- Single point of maintenance
- Wall mounted for ease of maintenance, especially in warehouses with racking
- 1 x Detector Head Assembly
- 1 x Prism for the MAB50R
- 1 x Dual Test Filter
- 1 x 4-way Connector for in line wiring
- 1 x 4-way Connector for right angle wiring
- It is modularized design, the panel can expend from 1 zone to 32 zones easily.
- It has 2 level control mode by a lock
- It has 24VDC and 5VDC power supply output.
- It has FIRE and FAULT signal output.
- It has 2 general sounders output.
- Each zone has 1 circuit detectors input .Each zone can be disable by a button.
- It has RESET button to reset the panel.
- It has SILENCE button to stop BUZZER and SOUNDERS.
- It has EVACUATE button to start a manual fire alarm immediately.
- It has battery low protection function, when battery voltage lower than 21VDC, battery will be cut off automatically until the mains power is on.It
- has an optional GSM module for fire alarm by SMS .
- Simplifies and speeds up installation and commissioning
- Uses patented proven technology
- The address remains the same, no matter how often detectors are replaced
- Flexibility to create any address
- Meet both EN54-3 and EN54 -23.
- Designed with an upper cover and a lower cover and installed on an independent base, it can be installed, debugged and maintained conveniently.
- Suitable for wall and ceiling mount application.
- Providing 16 tones.
- Highly efficient LED technology and specially designed lens.
- Light output synchronization.
- Electrochemical sensor technology detects CO gas.
- Easy installation, no wiring needed, detects during a power failure by operating on 2-AA batteries (included).
- Conveniently designed & portable: simple to install on a wall of your home or place on a tabletop.
- Green LED indicates power to the smoke detector, while an 85-decibel alarm & a red LED indicates the presence of carbon monoxide.
- Peak Level Memory records the last time carbon monoxide was detected or when the unit was last tested.
- Test-Hush button makes it easy to test the carbon monoxide detector or temporarily silence the low battery chirp warning.
- 32 tones (user selectable)
- 12V or 24V
- Secure clip fit base
- Volume control
- Fire approved and Signalling tone options
- For Fire, Security and Signalling
- Quick fitting for easy installation
- Reduce output to suit application
- Quick and simple to install | High sound output
- Low current consumption
- Multi-fixing base plate
- IP42 rated | Can be used for non fire applications
- Surface or flush mountable
- · Fast fit clip on front cover
- · Quick & simple to install
- · Single tool for testing and accessing the call point
- no wire connection
- 360° visibility LED using light pipe technology
- Wide range of detector types
- Drift compensation
- Removable detector chamber
- Aesthetically pleasing
- Low profile design
- 360° viewable LED design
- Removable detector chamber for cleaning
- New enhanced detectors feature Dual LEDs,
- Drift compensation and Chamber monitoring (Optical & Photo-Thermal)
- Flexible high specification system
- Very easy to maintain and service
- Suitable for a large range of projects
- No fuses required
- Maintenance free poly switch circuit protection with auto reset
- Class change and programmable fire/fault relay as standard on 2/4 zone
- Discreet panel design
- Numerical access code (no lock keys)
- Supplied complete with battery for 24 hour standby
- Polycarbonate housing
- Flexible high specification system
- Very easy to maintain and service
- Suitable for a large range of projects
- No fuses required
- Maintenance free poly switch circuit protection with auto reset
- Class change and programmable fire/fault relay as standard on 2/4 zone
- Discreet panel design
- Numerical access code (no lock keys)
- Supplied complete with battery for 24 hour standby
- Polycarbonate housing
- High pressure
- Can carry fire retardants such as water and foam
- Made of good material and is durable
- Can be used both indoors and outdoors
- Red Call Point
- 470 Ohm
- No LED
- Resettable plate insert
- Surface mount
- 87 x 87 x 53mm
- MX004: Resettable plate insert replacements (pack of 10)

Cooper Menvier MAB100R Addressable Reflective Beam Detector (100m Range)
Cooper Menvier MAB100R Addressable Reflective Beam Detector (100m Range)
Kit Contains:

Cooper Menvier MAB50R Addressable Reflective Beam Detector (50m Range)
Cooper Menvier MAB50R Addressable Reflective Beam Detector (50m Range)
Kit Contains:

Asenware AW-CFP2166 16 Zone Conventional Fire Panel
Asenware AW-CFP2166 16 Zone Conventional Fire Panel

Addressable Address Card
Addressable Address Card

Asenware Aw-Css2166-2 Conventional Fire Alarm Horn Strobe with flash
Asenware Aw-Css2166-2 Conventional Fire Alarm Horn Strobe with flash
Flash Intensity:≥1.2 Ws
Flash Light Lifespan:≥40000 Time
Flash Period:≤1.5 S
Color: Red
Work Current:40mA~60mA
Operating Voltage: DC16-DC30 V

AW-D316 CONVENTIONAL SOUNDER BEACON
AW-D316 CONVENTIONAL SOUNDER BEACON

Carbon Monoxide Alarm Detector
Carbon Monoxide Alarm Detector

Reflective Fire Exit Sign
Reflective Fire exit signs are used to clearly inform occupants of a building of the nearest emergency exits, safe evacuation route and general evacuation procedures.
Order Fire exit signs from Informed Store the leading safety equipment supplier in Kenya today at a discounted price.

Menvier Conventional combined Fire Alarm Sounder and Strobe Light at 100dB(A) Max at 1m complete with mounting base
Menvier Conventional combined Fire Alarm Sounder and Strobe Light at 100dB(A) Max at 1m complete with mounting base

Menvier Conventional Bell
Menvier Conventional Bell

Menvier Conventional Manual Call Point
Menvier Conventional Manual Call Point

Menvier Conventional Heat Detector with Base
Menvier Conventional Heat Detector with Base

Menvier Conventional Smoke Detector with Base
Menvier Conventional Smoke Detector with Base

Cooper Menvier Conventional 2 zone Fire Panel
Cooper Menvier Conventional 2 zone Fire Panel

Cooper Menvier Conventional 4 zone Fire Panel
Cooper Menvier Conventional 4 zone Fire Panel

Durable Rubber-Lined red Delivery Hose (2.5MM 30M)
DURABLE RUBBER-LINED RED DELIVERY HOSE (2.5MM 30M)

Asenware Conventional Fire Strobe Sounder aw-css2166-4
Asenware Conventional Fire Strobe Sounder aw-css2166-4
Weather-proof conventional fire strobe sounder is powered by a 24v electrical circuit. In the event of a fire, the sounder will sound and flash at the same time. Very stable and reliable; easy to install and wire; can be used in different emergency situations.

RESETTABLE FIRE MANUAL CALL POINT RED (CA-A002R)
RESETTABLE FIRE MANUAL CALL POINT RED (CA-A002R)

Fire Hydrant Valve Complete With 2way inlet Valves
Fire Hydrant Valve Complete With 2way inlet Valves
●Material:Cast iron/Dutile iron
●Inlet: 4” BS 4504 / 4” table E /4” ANSI 150#
●Outlet:2.5” female BS instantaneous
●Working pressure:20bar

2.5” Brass Landing Valve Screw
2.5” Brass Landing Valve Screw
| Usage/Application |
Fire Safety
|
| Valve Type |
Screwed
|
| Size |
2.5inch(Height)
|
| Material |
Brass
|
| Automation Grade |
Manual
|
| Pressure |
48 Bar
|
| Number Of Head |
Single
|
buy at discounted price at our shop in Nairobi, Kenya
