- 8 x 10/100/1000BASE-T PoE ports
- Supports IEEE 802.3at PoE
- Compact design for convenient placement
- Fanless design for silent operation
- Innovative D-Link Green energy-saving features
- Complete web interface for comprehensive switch management
- 24 x 10/100/1000BASE-T ports
- 4 x Gigabit RJ45/SFP Combo ports
- Advanced L2 switching and security features
- L2 Static Routing
- Optional “standard mode” or “surveillance mode” management user interface
- Forty-eight 10/100 Mbps ports
- Two copper/SFP Gigabit combo ports
- Auto MDI/MDIX crossover for all ports
- Flow control for secure transmission
- – Great Performance: 150+ Mbps real outdoor throughput and up to 15km+ range.
- Typical range is 2-4 miles from a LOS tower running AirMax sector antenna’s and Rocket M5’s.
- – Next-Gen Antenna Design: 14.6-16.1dBi dual-polarity gain at 5GHz with optimized cross-polarity isolation in a compact form-factor.
- – Dual Ethernet Connectivity: A secondary ethernet port with software enabled POE output for seamless IP Video integration.
- – Intelligent POE: Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location. – 802.3af 48V Compliant – Easily becomes 802.3af 48V compliant through use of Ubiquiti Instant 802.3af adapter.
- The adapter sold separately (SKU#I8023AF-OD or I8023AF-ID)
- – Easy Installation
- – Easily mountable to a pole/mast with mounting straps provided.
- In addition, the Nanostation M5 can be mounted and adjusted in any direction in a 90-degree angle through the use the NanoBracket. The NanoBracket is sold separately (SKU#MT-NANO U)
- Connect up to eight Ethernet devices for high-speed network connections.
- Eight Fast Ethernet LAN ports for high-speed wired connections
- Compliant with IEEE 802.3az Energy-Efficient Ethernet (EEE)
- D-Link Green Technology features power-saving by link status and by cable length
- Auto-sensing ports automatically detect network connections and adjust accordingly
- Stacking with FlexStack-Plus and FlexStack-Extended
- Cisco IOS LAN Base 1
- Cisco WS-C2960X-24PS-L With 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP) uplinks or 2 fixed 10 Gigabit Ethernet SFP+ uplinks and also 24 x Ethernet 10/100/1000 Gigabit ports
- 512MB RAM as well as 128GB flash memory
- Suitable for LAN networks, CCTV Installation and Voice.
- The CAT6 UTP Cable supports Gigabit Ethernet
- Pure Copper
- PE insulation
- FR PVC Jacket
- Operates at a bandwidth up to 100 Mhz.
- Comply with Cat5e specifications
- 4-pair shielded twisted pair (UTP) cable
- Size of RAM: 64MB
- CPU Nominal Frequency: 650MHz
- CPU Core Count: 1
- LTE Modem: Included
- 10/100 Ethernet Ports: 1
- Wireless: Built-in 2.4GHz 802.11b/g/n, dual-chain
- Wireless Antenna Gain: 2dBi
- LTE Antenna Gain: 2 to 4.5dBi (with uFL connector)
- Antenna Beamwidth: 360°
- Wireless Chip Model: QCA9531
- PoE In: Yes
- LTE Category: 4 (150Mbps Downlink, 50Mbps Uplink)
- 3G Category: R8 (Cat24 – 42.4Mbps Downlink), R7 (Cat14 – 21.1Mbps Downlink)
- SIM Slot: 1jk
- Supported Input Voltage: 9 to 30V (Passive PoE)
- Dimensions: 185 x 85 x 30mm
- Operating Temperature: -40 to 50°C tested
- License Level: 4
- Operating System: RouterOS Max. Power Consumption: 8W
- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) with optional EN54 part 13 compliance from the BSI.
- Intuitive user-friendly interface with color-coded buttons and combined keypad/keyswitch entry.
- Manufactured by C-TEC in the UK.
- Eight detector zone circuits.
- Four conventional sounder circuits.
- Integral 1.5A EN54-4/A2 compliant switch mode PSU.
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
- Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
- ‘Class change’ and alert inputs.
- Installer-friendly design.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
- Low 25mA quiescent current.
- Multiple indicators.
- System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system), optional CFP relay boards and optional EN54-13 compliant sounder circuit boards.
- Space for two x 12V 3.3Ah VRLA batteries.
- Fully compatible with C-TEC’s active range of conventional fire detectors.
- Installer-friendly design.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
- Low 25mA quiescent current.
- Multiple indicators.
- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) with optional EN54 part 13 compliance from the BSI.
- Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
- Manufactured by C-TEC in the UK.
- Four detector zone circuits.
- Four conventional sounder circuits.
- Integral 1.5A EN54-4/A2 compliant switch mode PSU.
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
- Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
- ‘Class change’ and alert inputs.
- System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system), optional CFP relay boards and optional EN54-13 compliant sounder circuit boards.
- Space for two x 12V 3.3Ah VRLA batteries.
- Fully compatible with C-TEC’s ActiV range of conventional fire detectors.
- Manual callpoint with resettable element operated by plastic key (included).
- Warning flag and LED confirmation of activation.
- Selectable resistance.
KSh13,500.00 Excl. VAT
D-Link DGS-1100-08P 8-Port Gigabit PoE Smart Managed Switch
SKU: N/AD-Link DGS-1100-08P 8-Port Gigabit PoE Smart Managed Switch
Powerful and flexible networking solution for small, medium, and enterprise businesses.
KSh47,200.00 Excl. VAT
D-Link DGS-1210-28 28-Port Gigabit Smart Managed Switch
SKU: N/AD-Link DGS-1210-28 28-Port Gigabit Smart Managed Switch
Cost-efficient and flexible solution for expanding any business network.
KSh36,200.00 Excl. VAT
D-Link DES-1050G 48-Port Unmanaged Ethernet Switch with 2 Gigabit Copper/SFP Ports
SKU: N/AD-Link DES-1050G 48-Port Unmanaged Ethernet Switch with 2 Gigabit Copper/SFP Ports
All-in-one Gigabit switch perfect for removing server bottlenecks and speeding up access to the network backbone.
KSh15,000.00 Excl. VAT
Ubiquiti Nanostation M5 Outdoor Access point, NSM5
SKU: N/AUbiquiti Nanostation M5 Outdoor Access point, NSM5
KSh1,400.00 Excl. VAT
D-Link DES-1008A 8 Port 10/100 Fast Ethernet Desktop Switch
SKU: N/AD-Link DES-1008A 8 Port 10/100 Fast Ethernet Desktop Switch
KSh279,000.00 Cisco catalyst WS-C2960X-24PS-L 24 gigabit poe switch
SKU: N/ACisco catalyst WS-C2960X-24PS-L 24 gigabit poe switch
Buy at the Best and Discounted prices in Nairobi Kenya
KSh22,000.00 Excl. VAT
Siemon Cat6 UTP Ethernet Cable
SKU: N/ASiemon Cat6 UTP Ethernet Cable
KSh17,200.00 Excl. VAT
MikroTik wAP LTE kit R11E-LTE Access Point
SKU: N/AMikroTik wAP LTE kit R11E-LTE Access Point
KSh4,500.00 Excl. VAT
2.5mm Electric Fence Undergate Cable 100m
SKU: N/A2.5mm Electric Fence Undergate Cable 100m
• Low electrical resistance reducing power and voltage drops over large distances
• Double insulated
• Tough polyethylene sheath for abrasion resistance in the ground
• UV stabilized double insulated cable, Black
KSh22,000.00 INIM Conventional control panel with 4 zones expandable to 20
SKU: N/AINIM Conventional control panel with 4 zones expandable to 20
The SmartLine conventional fire-detection control panel series offers a 2 zone non-expandable model (SmartLine020-2), a 4 zone model expandable to 20 zones (SmartLine020-4) and a 4 zone model expandable to 36 zones (SmartLine036-4).
KSh18,000.00 Non-expandable 2 zone conventional control panel – SmartLine020-2
SKU: N/ASmartLine020-2
The SmartLine conventional fire-detection control panel series offers a 2 zone non-expandable model (SmartLine020-2), a 4 zone model expandable to 20 zones (SmartLine020-4), and a 4 zone model expandable to 36 zones (SmartLine036-4).
KSh45,000.00 Excl. VAT
C-TEC Standard 8 Zone Conventional Fire Alarm Panel
SKU: N/AC-TEC Standard 8 Zone Conventional Fire Alarm Panel
KSh35,000.00 Excl. VAT
C-TEC Standard 4 Zone Conventional Fire Alarm Panel
SKU: N/AC-TEC Standard 4 Zone Conventional Fire Alarm Panel
KSh25,000.00 Excl. VAT
Asenware 8 Zone Fire alarm control Panel
SKU: N/AAsenware 8 Zone Fire alarm control Panel
The AW-CFP2166 series 8 Zone conventional fire alarm panel is designed based on EN54 part 2＆4 standard. And it is the central part of conventional fire alarm system, designed for applications requiring smoke detectors, bell, manual pull stations, and sprinkler supervision. Each zone can be disabled by a button. The basic unit offers 1 to 8 zones of initiation, up to 16 zones for larger applications.
KSh17,000.00 Asenware 4 Zone Fire Alarm Control Panel
SKU: N/AAsenware 4 Zone Fire Alarm Control Panel
KSh1,500.00 Excl. VAT
Break Glass Fire Emergency Door Release Red (CA-A001A)
SKU: N/ABreak Glass Fire Emergency Door Release Red (CA-A001A)
Supports electrical control or access control system
-Made of durable plastic shell and easy to install
-Use the Fireproof Material, Accord with the Safe Reques
-Sandblast Panel with Elegant Style
-Eyewitness only need to broke face-plate glass of conflagration Security Alarm Button in strength, then can make conflagration signal sending to the controller and give out the part of conflagration.
-Best protector in home, shop and other places
KSh3,500.00 Excl. VAT
Inim conventional Manual Call Point
SKU: N/AInim conventional Manual Call Point
KSh6,500.00 Excl. VAT
Conventional Sounder with Flasher
SKU: N/AConventional Sounder with Flasher
Acoustic and visual alarm indicator approved according new EN54-23 standard, IP65 protection rated (deep base version only), Operating voltage from 17 to 60 Vdc, mounting base included.
Selectable tone among 32 available by means of DIP SWITCH, flashing frequency selectable at 0,5Hz / 1Hz (by means of DIP SWITCH), 2 selectable sound level
KSh1,900.00 AW-CTD321 Conventional Fix Temperature Heat Detector
SKU: N/AConventional Fix Temperature Heat Detector AW-CTD321 is a photo-electronic detector using a state-of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm control panels.
1.Strong Adaptability For Circumstance
2.SMT Design, High Stability
3.40-60vdc Wide Voltage Operating Range
4.Low Standby Current
5.Power Supply Non-Polarized input
6.Twin Led For 360 Visual
7.Flashing Led Power Indicator
8.Remote Led Indicator Output(2-Wire)
9.Metal Shield. Anti-Electromagnetic Interference
KSh1,200.00 Excl. VAT
Asenware Smoke Detector AW-CSD311
SKU: N/AAsenware Smoke Detector AW-CSD311
AW-CSD311 is conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
- 8 x 10/100/1000BASE-T PoE ports
- Supports IEEE 802.3at PoE
- Compact design for convenient placement
- Fanless design for silent operation
- Innovative D-Link Green energy-saving features
- Complete web interface for comprehensive switch management
- 24 x 10/100/1000BASE-T ports
- 4 x Gigabit RJ45/SFP Combo ports
- Advanced L2 switching and security features
- L2 Static Routing
- Optional “standard mode” or “surveillance mode” management user interface
- Forty-eight 10/100 Mbps ports
- Two copper/SFP Gigabit combo ports
- Auto MDI/MDIX crossover for all ports
- Flow control for secure transmission
- – Great Performance: 150+ Mbps real outdoor throughput and up to 15km+ range.
- Typical range is 2-4 miles from a LOS tower running AirMax sector antenna’s and Rocket M5’s.
- – Next-Gen Antenna Design: 14.6-16.1dBi dual-polarity gain at 5GHz with optimized cross-polarity isolation in a compact form-factor.
- – Dual Ethernet Connectivity: A secondary ethernet port with software enabled POE output for seamless IP Video integration.
- – Intelligent POE: Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location. – 802.3af 48V Compliant – Easily becomes 802.3af 48V compliant through use of Ubiquiti Instant 802.3af adapter.
- The adapter sold separately (SKU#I8023AF-OD or I8023AF-ID)
- – Easy Installation
- – Easily mountable to a pole/mast with mounting straps provided.
- In addition, the Nanostation M5 can be mounted and adjusted in any direction in a 90-degree angle through the use the NanoBracket. The NanoBracket is sold separately (SKU#MT-NANO U)
- Connect up to eight Ethernet devices for high-speed network connections.
- Eight Fast Ethernet LAN ports for high-speed wired connections
- Compliant with IEEE 802.3az Energy-Efficient Ethernet (EEE)
- D-Link Green Technology features power-saving by link status and by cable length
- Auto-sensing ports automatically detect network connections and adjust accordingly
- Stacking with FlexStack-Plus and FlexStack-Extended
- Cisco IOS LAN Base 1
- Cisco WS-C2960X-24PS-L With 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP) uplinks or 2 fixed 10 Gigabit Ethernet SFP+ uplinks and also 24 x Ethernet 10/100/1000 Gigabit ports
- 512MB RAM as well as 128GB flash memory
- Suitable for LAN networks, CCTV Installation and Voice.
- The CAT6 UTP Cable supports Gigabit Ethernet
- Pure Copper
- PE insulation
- FR PVC Jacket
- Operates at a bandwidth up to 100 Mhz.
- Comply with Cat5e specifications
- 4-pair shielded twisted pair (UTP) cable
- Size of RAM: 64MB
- CPU Nominal Frequency: 650MHz
- CPU Core Count: 1
- LTE Modem: Included
- 10/100 Ethernet Ports: 1
- Wireless: Built-in 2.4GHz 802.11b/g/n, dual-chain
- Wireless Antenna Gain: 2dBi
- LTE Antenna Gain: 2 to 4.5dBi (with uFL connector)
- Antenna Beamwidth: 360°
- Wireless Chip Model: QCA9531
- PoE In: Yes
- LTE Category: 4 (150Mbps Downlink, 50Mbps Uplink)
- 3G Category: R8 (Cat24 – 42.4Mbps Downlink), R7 (Cat14 – 21.1Mbps Downlink)
- SIM Slot: 1jk
- Supported Input Voltage: 9 to 30V (Passive PoE)
- Dimensions: 185 x 85 x 30mm
- Operating Temperature: -40 to 50°C tested
- License Level: 4
- Operating System: RouterOS Max. Power Consumption: 8W
- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) with optional EN54 part 13 compliance from the BSI.
- Intuitive user-friendly interface with color-coded buttons and combined keypad/keyswitch entry.
- Manufactured by C-TEC in the UK.
- Eight detector zone circuits.
- Four conventional sounder circuits.
- Integral 1.5A EN54-4/A2 compliant switch mode PSU.
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
- Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
- ‘Class change’ and alert inputs.
- Installer-friendly design.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
- Low 25mA quiescent current.
- Multiple indicators.
- System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system), optional CFP relay boards and optional EN54-13 compliant sounder circuit boards.
- Space for two x 12V 3.3Ah VRLA batteries.
- Fully compatible with C-TEC’s active range of conventional fire detectors.
- Installer-friendly design.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
- Low 25mA quiescent current.
- Multiple indicators.
- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) with optional EN54 part 13 compliance from the BSI.
- Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
- Manufactured by C-TEC in the UK.
- Four detector zone circuits.
- Four conventional sounder circuits.
- Integral 1.5A EN54-4/A2 compliant switch mode PSU.
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
- Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
- ‘Class change’ and alert inputs.
- System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system), optional CFP relay boards and optional EN54-13 compliant sounder circuit boards.
- Space for two x 12V 3.3Ah VRLA batteries.
- Fully compatible with C-TEC’s ActiV range of conventional fire detectors.
- Manual callpoint with resettable element operated by plastic key (included).
- Warning flag and LED confirmation of activation.
- Selectable resistance.
D-Link DGS-1100-08P 8-Port Gigabit PoE Smart Managed Switch
D-Link DGS-1100-08P 8-Port Gigabit PoE Smart Managed Switch
Powerful and flexible networking solution for small, medium, and enterprise businesses.
D-Link DGS-1210-28 28-Port Gigabit Smart Managed Switch
D-Link DGS-1210-28 28-Port Gigabit Smart Managed Switch
Cost-efficient and flexible solution for expanding any business network.
D-Link DES-1050G 48-Port Unmanaged Ethernet Switch with 2 Gigabit Copper/SFP Ports
D-Link DES-1050G 48-Port Unmanaged Ethernet Switch with 2 Gigabit Copper/SFP Ports
All-in-one Gigabit switch perfect for removing server bottlenecks and speeding up access to the network backbone.
Ubiquiti Nanostation M5 Outdoor Access point, NSM5
Ubiquiti Nanostation M5 Outdoor Access point, NSM5
D-Link DES-1008A 8 Port 10/100 Fast Ethernet Desktop Switch
D-Link DES-1008A 8 Port 10/100 Fast Ethernet Desktop Switch
Cisco catalyst WS-C2960X-24PS-L 24 gigabit poe switch
Cisco catalyst WS-C2960X-24PS-L 24 gigabit poe switch
Buy at the Best and Discounted prices in Nairobi Kenya
Please Call/SMS +254 793 000 111 to confirm product availability.
KSh279,000.00Siemon Cat6 UTP Ethernet Cable
Siemon Cat6 UTP Ethernet Cable
MikroTik wAP LTE kit R11E-LTE Access Point
MikroTik wAP LTE kit R11E-LTE Access Point
2.5mm Electric Fence Undergate Cable 100m
2.5mm Electric Fence Undergate Cable 100m
• Low electrical resistance reducing power and voltage drops over large distances
• Double insulated
• Tough polyethylene sheath for abrasion resistance in the ground
• UV stabilized double insulated cable, Black
INIM Conventional control panel with 4 zones expandable to 20
INIM Conventional control panel with 4 zones expandable to 20
The SmartLine conventional fire-detection control panel series offers a 2 zone non-expandable model (SmartLine020-2), a 4 zone model expandable to 20 zones (SmartLine020-4) and a 4 zone model expandable to 36 zones (SmartLine036-4).
Non-expandable 2 zone conventional control panel – SmartLine020-2
SmartLine020-2
The SmartLine conventional fire-detection control panel series offers a 2 zone non-expandable model (SmartLine020-2), a 4 zone model expandable to 20 zones (SmartLine020-4), and a 4 zone model expandable to 36 zones (SmartLine036-4).
C-TEC Standard 8 Zone Conventional Fire Alarm Panel
C-TEC Standard 8 Zone Conventional Fire Alarm Panel
C-TEC Standard 4 Zone Conventional Fire Alarm Panel
C-TEC Standard 4 Zone Conventional Fire Alarm Panel
Asenware 8 Zone Fire alarm control Panel
Asenware 8 Zone Fire alarm control Panel
The AW-CFP2166 series 8 Zone conventional fire alarm panel is designed based on EN54 part 2＆4 standard. And it is the central part of conventional fire alarm system, designed for applications requiring smoke detectors, bell, manual pull stations, and sprinkler supervision. Each zone can be disabled by a button. The basic unit offers 1 to 8 zones of initiation, up to 16 zones for larger applications.
Asenware 4 Zone Fire Alarm Control Panel
Asenware 4 Zone Fire Alarm Control Panel
Break Glass Fire Emergency Door Release Red (CA-A001A)
Break Glass Fire Emergency Door Release Red (CA-A001A)
Supports electrical control or access control system
-Made of durable plastic shell and easy to install
-Use the Fireproof Material, Accord with the Safe Reques
-Sandblast Panel with Elegant Style
-Eyewitness only need to broke face-plate glass of conflagration Security Alarm Button in strength, then can make conflagration signal sending to the controller and give out the part of conflagration.
-Best protector in home, shop and other places
Inim conventional Manual Call Point
Inim conventional Manual Call Point
Conventional Sounder with Flasher
Conventional Sounder with Flasher
Acoustic and visual alarm indicator approved according new EN54-23 standard, IP65 protection rated (deep base version only), Operating voltage from 17 to 60 Vdc, mounting base included.
Selectable tone among 32 available by means of DIP SWITCH, flashing frequency selectable at 0,5Hz / 1Hz (by means of DIP SWITCH), 2 selectable sound level
AW-CTD321 Conventional Fix Temperature Heat Detector
Conventional Fix Temperature Heat Detector AW-CTD321 is a photo-electronic detector using a state-of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm control panels.
1.Strong Adaptability For Circumstance
2.SMT Design, High Stability
3.40-60vdc Wide Voltage Operating Range
4.Low Standby Current
5.Power Supply Non-Polarized input
6.Twin Led For 360 Visual
7.Flashing Led Power Indicator
8.Remote Led Indicator Output(2-Wire)
9.Metal Shield. Anti-Electromagnetic Interference
Asenware Smoke Detector AW-CSD311
Asenware Smoke Detector AW-CSD311
AW-CSD311 is conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
- 8 x 10/100/1000BASE-T PoE ports
- Supports IEEE 802.3at PoE
- Compact design for convenient placement
- Fanless design for silent operation
- Innovative D-Link Green energy-saving features
- Complete web interface for comprehensive switch management
- 24 x 10/100/1000BASE-T ports
- 4 x Gigabit RJ45/SFP Combo ports
- Advanced L2 switching and security features
- L2 Static Routing
- Optional “standard mode” or “surveillance mode” management user interface
- Forty-eight 10/100 Mbps ports
- Two copper/SFP Gigabit combo ports
- Auto MDI/MDIX crossover for all ports
- Flow control for secure transmission
- – Great Performance: 150+ Mbps real outdoor throughput and up to 15km+ range.
- Typical range is 2-4 miles from a LOS tower running AirMax sector antenna’s and Rocket M5’s.
- – Next-Gen Antenna Design: 14.6-16.1dBi dual-polarity gain at 5GHz with optimized cross-polarity isolation in a compact form-factor.
- – Dual Ethernet Connectivity: A secondary ethernet port with software enabled POE output for seamless IP Video integration.
- – Intelligent POE: Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location. – 802.3af 48V Compliant – Easily becomes 802.3af 48V compliant through use of Ubiquiti Instant 802.3af adapter.
- The adapter sold separately (SKU#I8023AF-OD or I8023AF-ID)
- – Easy Installation
- – Easily mountable to a pole/mast with mounting straps provided.
- In addition, the Nanostation M5 can be mounted and adjusted in any direction in a 90-degree angle through the use the NanoBracket. The NanoBracket is sold separately (SKU#MT-NANO U)
- Connect up to eight Ethernet devices for high-speed network connections.
- Eight Fast Ethernet LAN ports for high-speed wired connections
- Compliant with IEEE 802.3az Energy-Efficient Ethernet (EEE)
- D-Link Green Technology features power-saving by link status and by cable length
- Auto-sensing ports automatically detect network connections and adjust accordingly
- Stacking with FlexStack-Plus and FlexStack-Extended
- Cisco IOS LAN Base 1
- Cisco WS-C2960X-24PS-L With 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP) uplinks or 2 fixed 10 Gigabit Ethernet SFP+ uplinks and also 24 x Ethernet 10/100/1000 Gigabit ports
- 512MB RAM as well as 128GB flash memory
- Suitable for LAN networks, CCTV Installation and Voice.
- The CAT6 UTP Cable supports Gigabit Ethernet
- Pure Copper
- PE insulation
- FR PVC Jacket
- Operates at a bandwidth up to 100 Mhz.
- Comply with Cat5e specifications
- 4-pair shielded twisted pair (UTP) cable
- Size of RAM: 64MB
- CPU Nominal Frequency: 650MHz
- CPU Core Count: 1
- LTE Modem: Included
- 10/100 Ethernet Ports: 1
- Wireless: Built-in 2.4GHz 802.11b/g/n, dual-chain
- Wireless Antenna Gain: 2dBi
- LTE Antenna Gain: 2 to 4.5dBi (with uFL connector)
- Antenna Beamwidth: 360°
- Wireless Chip Model: QCA9531
- PoE In: Yes
- LTE Category: 4 (150Mbps Downlink, 50Mbps Uplink)
- 3G Category: R8 (Cat24 – 42.4Mbps Downlink), R7 (Cat14 – 21.1Mbps Downlink)
- SIM Slot: 1jk
- Supported Input Voltage: 9 to 30V (Passive PoE)
- Dimensions: 185 x 85 x 30mm
- Operating Temperature: -40 to 50°C tested
- License Level: 4
- Operating System: RouterOS Max. Power Consumption: 8W
- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) with optional EN54 part 13 compliance from the BSI.
- Intuitive user-friendly interface with color-coded buttons and combined keypad/keyswitch entry.
- Manufactured by C-TEC in the UK.
- Eight detector zone circuits.
- Four conventional sounder circuits.
- Integral 1.5A EN54-4/A2 compliant switch mode PSU.
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
- Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
- ‘Class change’ and alert inputs.
- Installer-friendly design.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
- Low 25mA quiescent current.
- Multiple indicators.
- System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system), optional CFP relay boards and optional EN54-13 compliant sounder circuit boards.
- Space for two x 12V 3.3Ah VRLA batteries.
- Fully compatible with C-TEC’s active range of conventional fire detectors.
- Installer-friendly design.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
- Low 25mA quiescent current.
- Multiple indicators.
- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) with optional EN54 part 13 compliance from the BSI.
- Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
- Manufactured by C-TEC in the UK.
- Four detector zone circuits.
- Four conventional sounder circuits.
- Integral 1.5A EN54-4/A2 compliant switch mode PSU.
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
- Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
- ‘Class change’ and alert inputs.
- System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system), optional CFP relay boards and optional EN54-13 compliant sounder circuit boards.
- Space for two x 12V 3.3Ah VRLA batteries.
- Fully compatible with C-TEC’s ActiV range of conventional fire detectors.
- Manual callpoint with resettable element operated by plastic key (included).
- Warning flag and LED confirmation of activation.
- Selectable resistance.
D-Link DGS-1100-08P 8-Port Gigabit PoE Smart Managed Switch
D-Link DGS-1100-08P 8-Port Gigabit PoE Smart Managed Switch
Powerful and flexible networking solution for small, medium, and enterprise businesses.
D-Link DGS-1210-28 28-Port Gigabit Smart Managed Switch
D-Link DGS-1210-28 28-Port Gigabit Smart Managed Switch
Cost-efficient and flexible solution for expanding any business network.
D-Link DES-1050G 48-Port Unmanaged Ethernet Switch with 2 Gigabit Copper/SFP Ports
D-Link DES-1050G 48-Port Unmanaged Ethernet Switch with 2 Gigabit Copper/SFP Ports
All-in-one Gigabit switch perfect for removing server bottlenecks and speeding up access to the network backbone.
Ubiquiti Nanostation M5 Outdoor Access point, NSM5
Ubiquiti Nanostation M5 Outdoor Access point, NSM5
D-Link DES-1008A 8 Port 10/100 Fast Ethernet Desktop Switch
D-Link DES-1008A 8 Port 10/100 Fast Ethernet Desktop Switch
Cisco catalyst WS-C2960X-24PS-L 24 gigabit poe switch
Cisco catalyst WS-C2960X-24PS-L 24 gigabit poe switch
Buy at the Best and Discounted prices in Nairobi Kenya
Please Call/SMS +254 793 000 111 to confirm product availability.
KSh279,000.00Siemon Cat6 UTP Ethernet Cable
Siemon Cat6 UTP Ethernet Cable
MikroTik wAP LTE kit R11E-LTE Access Point
MikroTik wAP LTE kit R11E-LTE Access Point
2.5mm Electric Fence Undergate Cable 100m
2.5mm Electric Fence Undergate Cable 100m
• Low electrical resistance reducing power and voltage drops over large distances
• Double insulated
• Tough polyethylene sheath for abrasion resistance in the ground
• UV stabilized double insulated cable, Black
INIM Conventional control panel with 4 zones expandable to 20
INIM Conventional control panel with 4 zones expandable to 20
The SmartLine conventional fire-detection control panel series offers a 2 zone non-expandable model (SmartLine020-2), a 4 zone model expandable to 20 zones (SmartLine020-4) and a 4 zone model expandable to 36 zones (SmartLine036-4).
Non-expandable 2 zone conventional control panel – SmartLine020-2
SmartLine020-2
The SmartLine conventional fire-detection control panel series offers a 2 zone non-expandable model (SmartLine020-2), a 4 zone model expandable to 20 zones (SmartLine020-4), and a 4 zone model expandable to 36 zones (SmartLine036-4).
C-TEC Standard 8 Zone Conventional Fire Alarm Panel
C-TEC Standard 8 Zone Conventional Fire Alarm Panel
C-TEC Standard 4 Zone Conventional Fire Alarm Panel
C-TEC Standard 4 Zone Conventional Fire Alarm Panel
Asenware 8 Zone Fire alarm control Panel
Asenware 8 Zone Fire alarm control Panel
The AW-CFP2166 series 8 Zone conventional fire alarm panel is designed based on EN54 part 2＆4 standard. And it is the central part of conventional fire alarm system, designed for applications requiring smoke detectors, bell, manual pull stations, and sprinkler supervision. Each zone can be disabled by a button. The basic unit offers 1 to 8 zones of initiation, up to 16 zones for larger applications.
Asenware 4 Zone Fire Alarm Control Panel
Asenware 4 Zone Fire Alarm Control Panel
Break Glass Fire Emergency Door Release Red (CA-A001A)
Break Glass Fire Emergency Door Release Red (CA-A001A)
Supports electrical control or access control system
-Made of durable plastic shell and easy to install
-Use the Fireproof Material, Accord with the Safe Reques
-Sandblast Panel with Elegant Style
-Eyewitness only need to broke face-plate glass of conflagration Security Alarm Button in strength, then can make conflagration signal sending to the controller and give out the part of conflagration.
-Best protector in home, shop and other places
Inim conventional Manual Call Point
Inim conventional Manual Call Point
Conventional Sounder with Flasher
Conventional Sounder with Flasher
Acoustic and visual alarm indicator approved according new EN54-23 standard, IP65 protection rated (deep base version only), Operating voltage from 17 to 60 Vdc, mounting base included.
Selectable tone among 32 available by means of DIP SWITCH, flashing frequency selectable at 0,5Hz / 1Hz (by means of DIP SWITCH), 2 selectable sound level
AW-CTD321 Conventional Fix Temperature Heat Detector
Conventional Fix Temperature Heat Detector AW-CTD321 is a photo-electronic detector using a state-of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm control panels.
1.Strong Adaptability For Circumstance
2.SMT Design, High Stability
3.40-60vdc Wide Voltage Operating Range
4.Low Standby Current
5.Power Supply Non-Polarized input
6.Twin Led For 360 Visual
7.Flashing Led Power Indicator
8.Remote Led Indicator Output(2-Wire)
9.Metal Shield. Anti-Electromagnetic Interference
Asenware Smoke Detector AW-CSD311
Asenware Smoke Detector AW-CSD311
AW-CSD311 is conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
- 8 x 10/100/1000BASE-T PoE ports
- Supports IEEE 802.3at PoE
- Compact design for convenient placement
- Fanless design for silent operation
- Innovative D-Link Green energy-saving features
- Complete web interface for comprehensive switch management
- 24 x 10/100/1000BASE-T ports
- 4 x Gigabit RJ45/SFP Combo ports
- Advanced L2 switching and security features
- L2 Static Routing
- Optional “standard mode” or “surveillance mode” management user interface
- Forty-eight 10/100 Mbps ports
- Two copper/SFP Gigabit combo ports
- Auto MDI/MDIX crossover for all ports
- Flow control for secure transmission
- – Great Performance: 150+ Mbps real outdoor throughput and up to 15km+ range.
- Typical range is 2-4 miles from a LOS tower running AirMax sector antenna’s and Rocket M5’s.
- – Next-Gen Antenna Design: 14.6-16.1dBi dual-polarity gain at 5GHz with optimized cross-polarity isolation in a compact form-factor.
- – Dual Ethernet Connectivity: A secondary ethernet port with software enabled POE output for seamless IP Video integration.
- – Intelligent POE: Remote hardware reset circuitry of NanoStation M allows for device to be reset remotely from power supply location. – 802.3af 48V Compliant – Easily becomes 802.3af 48V compliant through use of Ubiquiti Instant 802.3af adapter.
- The adapter sold separately (SKU#I8023AF-OD or I8023AF-ID)
- – Easy Installation
- – Easily mountable to a pole/mast with mounting straps provided.
- In addition, the Nanostation M5 can be mounted and adjusted in any direction in a 90-degree angle through the use the NanoBracket. The NanoBracket is sold separately (SKU#MT-NANO U)
- Connect up to eight Ethernet devices for high-speed network connections.
- Eight Fast Ethernet LAN ports for high-speed wired connections
- Compliant with IEEE 802.3az Energy-Efficient Ethernet (EEE)
- D-Link Green Technology features power-saving by link status and by cable length
- Auto-sensing ports automatically detect network connections and adjust accordingly
- Stacking with FlexStack-Plus and FlexStack-Extended
- Cisco IOS LAN Base 1
- Cisco WS-C2960X-24PS-L With 4 fixed 1 Gigabit Ethernet Small Form-Factor Pluggable (SFP) uplinks or 2 fixed 10 Gigabit Ethernet SFP+ uplinks and also 24 x Ethernet 10/100/1000 Gigabit ports
- 512MB RAM as well as 128GB flash memory
- Suitable for LAN networks, CCTV Installation and Voice.
- The CAT6 UTP Cable supports Gigabit Ethernet
- Pure Copper
- PE insulation
- FR PVC Jacket
- Operates at a bandwidth up to 100 Mhz.
- Comply with Cat5e specifications
- 4-pair shielded twisted pair (UTP) cable
- Size of RAM: 64MB
- CPU Nominal Frequency: 650MHz
- CPU Core Count: 1
- LTE Modem: Included
- 10/100 Ethernet Ports: 1
- Wireless: Built-in 2.4GHz 802.11b/g/n, dual-chain
- Wireless Antenna Gain: 2dBi
- LTE Antenna Gain: 2 to 4.5dBi (with uFL connector)
- Antenna Beamwidth: 360°
- Wireless Chip Model: QCA9531
- PoE In: Yes
- LTE Category: 4 (150Mbps Downlink, 50Mbps Uplink)
- 3G Category: R8 (Cat24 – 42.4Mbps Downlink), R7 (Cat14 – 21.1Mbps Downlink)
- SIM Slot: 1jk
- Supported Input Voltage: 9 to 30V (Passive PoE)
- Dimensions: 185 x 85 x 30mm
- Operating Temperature: -40 to 50°C tested
- License Level: 4
- Operating System: RouterOS Max. Power Consumption: 8W
- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) with optional EN54 part 13 compliance from the BSI.
- Intuitive user-friendly interface with color-coded buttons and combined keypad/keyswitch entry.
- Manufactured by C-TEC in the UK.
- Eight detector zone circuits.
- Four conventional sounder circuits.
- Integral 1.5A EN54-4/A2 compliant switch mode PSU.
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
- Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
- ‘Class change’ and alert inputs.
- Installer-friendly design.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
- Low 25mA quiescent current.
- Multiple indicators.
- System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system), optional CFP relay boards and optional EN54-13 compliant sounder circuit boards.
- Space for two x 12V 3.3Ah VRLA batteries.
- Fully compatible with C-TEC’s active range of conventional fire detectors.
- Installer-friendly design.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
- Low 25mA quiescent current.
- Multiple indicators.
- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB) with optional EN54 part 13 compliance from the BSI.
- Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
- Manufactured by C-TEC in the UK.
- Four detector zone circuits.
- Four conventional sounder circuits.
- Integral 1.5A EN54-4/A2 compliant switch mode PSU.
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
- Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
- ‘Class change’ and alert inputs.
- System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system), optional CFP relay boards and optional EN54-13 compliant sounder circuit boards.
- Space for two x 12V 3.3Ah VRLA batteries.
- Fully compatible with C-TEC’s ActiV range of conventional fire detectors.
- Manual callpoint with resettable element operated by plastic key (included).
- Warning flag and LED confirmation of activation.
- Selectable resistance.
D-Link DGS-1100-08P 8-Port Gigabit PoE Smart Managed Switch
D-Link DGS-1100-08P 8-Port Gigabit PoE Smart Managed Switch
Powerful and flexible networking solution for small, medium, and enterprise businesses.
D-Link DGS-1210-28 28-Port Gigabit Smart Managed Switch
D-Link DGS-1210-28 28-Port Gigabit Smart Managed Switch
Cost-efficient and flexible solution for expanding any business network.
D-Link DES-1050G 48-Port Unmanaged Ethernet Switch with 2 Gigabit Copper/SFP Ports
D-Link DES-1050G 48-Port Unmanaged Ethernet Switch with 2 Gigabit Copper/SFP Ports
All-in-one Gigabit switch perfect for removing server bottlenecks and speeding up access to the network backbone.
Ubiquiti Nanostation M5 Outdoor Access point, NSM5
Ubiquiti Nanostation M5 Outdoor Access point, NSM5
D-Link DES-1008A 8 Port 10/100 Fast Ethernet Desktop Switch
D-Link DES-1008A 8 Port 10/100 Fast Ethernet Desktop Switch
Cisco catalyst WS-C2960X-24PS-L 24 gigabit poe switch
Cisco catalyst WS-C2960X-24PS-L 24 gigabit poe switch
Buy at the Best and Discounted prices in Nairobi Kenya
Siemon Cat6 UTP Ethernet Cable
Siemon Cat6 UTP Ethernet Cable
MikroTik wAP LTE kit R11E-LTE Access Point
MikroTik wAP LTE kit R11E-LTE Access Point
2.5mm Electric Fence Undergate Cable 100m
2.5mm Electric Fence Undergate Cable 100m
• Low electrical resistance reducing power and voltage drops over large distances
• Double insulated
• Tough polyethylene sheath for abrasion resistance in the ground
• UV stabilized double insulated cable, Black
INIM Conventional control panel with 4 zones expandable to 20
INIM Conventional control panel with 4 zones expandable to 20
The SmartLine conventional fire-detection control panel series offers a 2 zone non-expandable model (SmartLine020-2), a 4 zone model expandable to 20 zones (SmartLine020-4) and a 4 zone model expandable to 36 zones (SmartLine036-4).
Non-expandable 2 zone conventional control panel – SmartLine020-2
SmartLine020-2
The SmartLine conventional fire-detection control panel series offers a 2 zone non-expandable model (SmartLine020-2), a 4 zone model expandable to 20 zones (SmartLine020-4), and a 4 zone model expandable to 36 zones (SmartLine036-4).
C-TEC Standard 8 Zone Conventional Fire Alarm Panel
C-TEC Standard 8 Zone Conventional Fire Alarm Panel
C-TEC Standard 4 Zone Conventional Fire Alarm Panel
C-TEC Standard 4 Zone Conventional Fire Alarm Panel
Asenware 8 Zone Fire alarm control Panel
Asenware 8 Zone Fire alarm control Panel
The AW-CFP2166 series 8 Zone conventional fire alarm panel is designed based on EN54 part 2＆4 standard. And it is the central part of conventional fire alarm system, designed for applications requiring smoke detectors, bell, manual pull stations, and sprinkler supervision. Each zone can be disabled by a button. The basic unit offers 1 to 8 zones of initiation, up to 16 zones for larger applications.
Asenware 4 Zone Fire Alarm Control Panel
Asenware 4 Zone Fire Alarm Control Panel
Break Glass Fire Emergency Door Release Red (CA-A001A)
Break Glass Fire Emergency Door Release Red (CA-A001A)
Supports electrical control or access control system
-Made of durable plastic shell and easy to install
-Use the Fireproof Material, Accord with the Safe Reques
-Sandblast Panel with Elegant Style
-Eyewitness only need to broke face-plate glass of conflagration Security Alarm Button in strength, then can make conflagration signal sending to the controller and give out the part of conflagration.
-Best protector in home, shop and other places
Inim conventional Manual Call Point
Inim conventional Manual Call Point
Conventional Sounder with Flasher
Conventional Sounder with Flasher
Acoustic and visual alarm indicator approved according new EN54-23 standard, IP65 protection rated (deep base version only), Operating voltage from 17 to 60 Vdc, mounting base included.
Selectable tone among 32 available by means of DIP SWITCH, flashing frequency selectable at 0,5Hz / 1Hz (by means of DIP SWITCH), 2 selectable sound level
AW-CTD321 Conventional Fix Temperature Heat Detector
Conventional Fix Temperature Heat Detector AW-CTD321 is a photo-electronic detector using a state-of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm control panels.
1.Strong Adaptability For Circumstance
2.SMT Design, High Stability
3.40-60vdc Wide Voltage Operating Range
4.Low Standby Current
5.Power Supply Non-Polarized input
6.Twin Led For 360 Visual
7.Flashing Led Power Indicator
8.Remote Led Indicator Output(2-Wire)
9.Metal Shield. Anti-Electromagnetic Interference
Asenware Smoke Detector AW-CSD311
Asenware Smoke Detector AW-CSD311
AW-CSD311 is conventional photo-electronic smoke detector uses a state of-the-art optical sensing chamber. This detector is designed to provide open area protection and to be used with most conventional fire alarm panel.
